From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org
Subject: [Qemu-devel] [PULL 02/16] tcg: Fix missing checks and clears in tcg_gen_gvec_dup_mem
Date: Wed, 22 May 2019 18:28:07 -0400 [thread overview]
Message-ID: <20190522222821.23850-3-richard.henderson@linaro.org> (raw)
In-Reply-To: <20190522222821.23850-1-richard.henderson@linaro.org>
The paths through tcg_gen_dup_mem_vec and through MO_128 were
missing the check_size_align. The path through MO_128 was also
missing the expand_clr. This last was not visible because the
only user is ARM SVE, which would set oprsz == maxsz, and not
require the clear.
Fix by adding the check_size_align and using do_dup directly
instead of duplicating the check in tcg_gen_gvec_dup_{i32,i64}.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
tcg/tcg-op-gvec.c | 48 ++++++++++++++++++++++++-----------------------
1 file changed, 25 insertions(+), 23 deletions(-)
diff --git a/tcg/tcg-op-gvec.c b/tcg/tcg-op-gvec.c
index 338ddd9d9e..bbf70e3cd9 100644
--- a/tcg/tcg-op-gvec.c
+++ b/tcg/tcg-op-gvec.c
@@ -1446,36 +1446,35 @@ void tcg_gen_gvec_dup_i64(unsigned vece, uint32_t dofs, uint32_t oprsz,
void tcg_gen_gvec_dup_mem(unsigned vece, uint32_t dofs, uint32_t aofs,
uint32_t oprsz, uint32_t maxsz)
{
+ check_size_align(oprsz, maxsz, dofs);
if (vece <= MO_64) {
- TCGType type = choose_vector_type(0, vece, oprsz, 0);
+ TCGType type = choose_vector_type(NULL, vece, oprsz, 0);
if (type != 0) {
TCGv_vec t_vec = tcg_temp_new_vec(type);
tcg_gen_dup_mem_vec(vece, t_vec, cpu_env, aofs);
do_dup_store(type, dofs, oprsz, maxsz, t_vec);
tcg_temp_free_vec(t_vec);
- return;
+ } else if (vece <= MO_32) {
+ TCGv_i32 in = tcg_temp_new_i32();
+ switch (vece) {
+ case MO_8:
+ tcg_gen_ld8u_i32(in, cpu_env, aofs);
+ break;
+ case MO_16:
+ tcg_gen_ld16u_i32(in, cpu_env, aofs);
+ break;
+ default:
+ tcg_gen_ld_i32(in, cpu_env, aofs);
+ break;
+ }
+ do_dup(vece, dofs, oprsz, maxsz, in, NULL, 0);
+ tcg_temp_free_i32(in);
+ } else {
+ TCGv_i64 in = tcg_temp_new_i64();
+ tcg_gen_ld_i64(in, cpu_env, aofs);
+ do_dup(vece, dofs, oprsz, maxsz, NULL, in, 0);
+ tcg_temp_free_i64(in);
}
- }
- if (vece <= MO_32) {
- TCGv_i32 in = tcg_temp_new_i32();
- switch (vece) {
- case MO_8:
- tcg_gen_ld8u_i32(in, cpu_env, aofs);
- break;
- case MO_16:
- tcg_gen_ld16u_i32(in, cpu_env, aofs);
- break;
- case MO_32:
- tcg_gen_ld_i32(in, cpu_env, aofs);
- break;
- }
- tcg_gen_gvec_dup_i32(vece, dofs, oprsz, maxsz, in);
- tcg_temp_free_i32(in);
- } else if (vece == MO_64) {
- TCGv_i64 in = tcg_temp_new_i64();
- tcg_gen_ld_i64(in, cpu_env, aofs);
- tcg_gen_gvec_dup_i64(MO_64, dofs, oprsz, maxsz, in);
- tcg_temp_free_i64(in);
} else {
/* 128-bit duplicate. */
/* ??? Dup to 256-bit vector. */
@@ -1504,6 +1503,9 @@ void tcg_gen_gvec_dup_mem(unsigned vece, uint32_t dofs, uint32_t aofs,
tcg_temp_free_i64(in0);
tcg_temp_free_i64(in1);
}
+ if (oprsz < maxsz) {
+ expand_clr(dofs + oprsz, maxsz - oprsz);
+ }
}
}
--
2.17.1
next prev parent reply other threads:[~2019-05-22 22:30 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-22 22:28 [Qemu-devel] [PULL 00/16] tcg queued patches Richard Henderson
2019-05-22 22:28 ` [Qemu-devel] [PULL 01/16] tcg/i386: Fix dupi/dupm for avx1 and 32-bit hosts Richard Henderson
2019-05-22 22:28 ` Richard Henderson [this message]
2019-05-22 22:28 ` [Qemu-devel] [PULL 03/16] tcg: Add support for vector bitwise select Richard Henderson
2019-05-22 22:28 ` [Qemu-devel] [PULL 04/16] tcg: Add support for vector compare select Richard Henderson
2019-05-22 22:28 ` [Qemu-devel] [PULL 05/16] tcg: Introduce do_op3_nofail for vector expansion Richard Henderson
2019-05-22 22:28 ` [Qemu-devel] [PULL 06/16] tcg: Expand vector minmax using cmp+cmpsel Richard Henderson
2019-05-22 22:28 ` [Qemu-devel] [PULL 07/16] tcg: Add TCG_OPF_NOT_PRESENT if TCG_TARGET_HAS_foo is negative Richard Henderson
2019-05-22 22:28 ` [Qemu-devel] [PULL 08/16] tcg/i386: Support vector comparison select value Richard Henderson
2019-05-30 11:26 ` Peter Maydell
2019-05-30 12:50 ` Richard Henderson
2019-05-30 14:54 ` Aleksandar Markovic
2019-05-30 17:45 ` Richard Henderson
2019-05-30 23:18 ` Aleksandar Markovic
2019-05-22 22:28 ` [Qemu-devel] [PULL 09/16] tcg/i386: Remove expansion for missing minmax Richard Henderson
2019-05-22 22:28 ` [Qemu-devel] [PULL 10/16] tcg/i386: Use umin/umax in expanding unsigned compare Richard Henderson
2019-05-22 22:28 ` [Qemu-devel] [PULL 11/16] tcg/aarch64: Support vector bitwise select value Richard Henderson
2019-05-22 22:28 ` [Qemu-devel] [PULL 12/16] tcg/aarch64: Split up is_fimm Richard Henderson
2019-05-22 22:28 ` [Qemu-devel] [PULL 13/16] tcg/aarch64: Use MVNI in tcg_out_dupi_vec Richard Henderson
2019-05-22 22:28 ` [Qemu-devel] [PULL 14/16] tcg/aarch64: Build vector immediates with two insns Richard Henderson
2019-05-22 22:28 ` [Qemu-devel] [PULL 15/16] tcg/aarch64: Allow immediates for vector ORR and BIC Richard Henderson
2019-05-22 22:28 ` [Qemu-devel] [PULL 16/16] tcg/i386: Use MOVDQA for TCG_TYPE_V128 load/store Richard Henderson
2019-05-28 17:28 ` David Hildenbrand
2019-05-28 18:33 ` David Hildenbrand
2019-05-28 18:46 ` David Hildenbrand
2019-05-28 21:34 ` Richard Henderson
2019-05-23 8:17 ` [Qemu-devel] [PULL 00/16] tcg queued patches Aleksandar Markovic
2019-05-23 12:42 ` Richard Henderson
2019-05-24 10:43 ` Peter Maydell
2019-05-28 16:58 ` David Hildenbrand
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190522222821.23850-3-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).