From: "Alex Bennée" <alex.bennee@linaro.org>
To: peter.maydell@linaro.org
Cc: "Alex Bennée" <alex.bennee@linaro.org>,
"Richard Henderson" <richard.henderson@linaro.org>,
qemu-devel@nongnu.org, "Richard Henderson" <rth@twiddle.net>
Subject: [Qemu-devel] [PULL 21/28] tests/tcg/alpha: add system boot.S
Date: Tue, 28 May 2019 10:49:46 +0100 [thread overview]
Message-ID: <20190528094953.14898-22-alex.bennee@linaro.org> (raw)
In-Reply-To: <20190528094953.14898-1-alex.bennee@linaro.org>
From: Richard Henderson <richard.henderson@linaro.org>
This provides the bootstrap and low level helper functions for an
alpha kernel. We use direct access to the DP264 serial port for
test output, and hard machine halt to exit the emulation.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190501184306.15208-1-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
diff --git a/MAINTAINERS b/MAINTAINERS
index cc1178fe692..cf1158a434f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -470,6 +470,7 @@ M: Richard Henderson <rth@twiddle.net>
S: Maintained
F: hw/alpha/
F: hw/isa/smc37c669-superio.c
+F: tests/tcg/alpha/system/
ARM Machines
------------
diff --git a/tests/tcg/alpha/Makefile.softmmu-target b/tests/tcg/alpha/Makefile.softmmu-target
new file mode 100644
index 00000000000..3c0f34cc692
--- /dev/null
+++ b/tests/tcg/alpha/Makefile.softmmu-target
@@ -0,0 +1,34 @@
+#
+# Alpha system tests
+#
+
+ALPHA_SYSTEM_SRC=$(SRC_PATH)/tests/tcg/alpha/system
+VPATH+=$(ALPHA_SYSTEM_SRC)
+
+# These objects provide the basic boot code and helper functions for all tests
+CRT_OBJS=boot.o
+
+ALPHA_TEST_SRCS=$(wildcard $(ALPHA_SYSTEM_SRC)/*.c)
+ALPHA_TESTS = $(patsubst $(ALPHA_SYSTEM_SRC)/%.c, %, $(ALPHA_TEST_SRCS))
+
+CRT_PATH=$(ALPHA_SYSTEM_SRC)
+LINK_SCRIPT=$(ALPHA_SYSTEM_SRC)/kernel.ld
+LDFLAGS=-Wl,-T$(LINK_SCRIPT)
+TESTS+=$(ALPHA_TESTS) $(MULTIARCH_TESTS)
+CFLAGS+=-nostdlib -g -O1 -mcpu=ev6 $(MINILIB_INC)
+LDFLAGS+=-static -nostdlib $(CRT_OBJS) $(MINILIB_OBJS) -lgcc
+
+# building head blobs
+.PRECIOUS: $(CRT_OBJS)
+
+%.o: $(CRT_PATH)/%.S
+ $(CC) $(CFLAGS) -x assembler-with-cpp -c $< -o $@
+
+# Build and link the tests
+%: %.c $(LINK_SCRIPT) $(CRT_OBJS) $(MINILIB_OBJS)
+ $(CC) $(CFLAGS) $< -o $@ $(LDFLAGS)
+
+memory: CFLAGS+=-DCHECK_UNALIGNED=0
+
+# Running
+QEMU_OPTS+=-serial chardev:output -kernel
diff --git a/tests/tcg/alpha/system/boot.S b/tests/tcg/alpha/system/boot.S
new file mode 100644
index 00000000000..9791b1ef7c8
--- /dev/null
+++ b/tests/tcg/alpha/system/boot.S
@@ -0,0 +1,511 @@
+/*
+ * Minimal Alpha system boot code.
+ *
+ * Copyright Linaro Ltd 2019
+ */
+
+ .set noat
+ .set nomacro
+ .arch ev6
+ .text
+
+.macro load_pci_io reg
+ /* For typhoon, this is
+ * 0xfffffc0000000000 -- kseg identity map
+ * + 0x10000000000 -- typhoon pio base
+ * + 0x1fc000000 -- typhoon pchip0 pci base
+ * = 0xfffffd01fc000000
+ */
+ ldah \reg, -3 /* ff..fd0000 */
+ lda \reg, 0x1fc(\reg) /* ff..fd01fc */
+ sll \reg, 24, \reg
+.endm
+
+#define com1Rbr 0x3f8
+#define com1Thr 0x3f8
+#define com1Ier 0x3f9
+#define com1Iir 0x3fa
+#define com1Lcr 0x3fb
+#define com1Mcr 0x3fc
+#define com1Lsr 0x3fd
+#define com1Msr 0x3fe
+#define com1Scr 0x3ff
+#define com1Dll 0x3f8
+#define com1Dlm 0x3f9
+
+#define PAL_halt 0
+#define PAL_wrent 52
+#define PAL_wrkgp 55
+
+ .text
+ .p2align 4
+ .globl _start
+ .ent _start
+_start:
+ br $gp, .+4
+ ldah $gp, 0($gp) !gpdisp!1
+ lda $gp, 0($gp) !gpdisp!1
+
+ ldah $sp, $stack_end($gp) !gprelhigh
+ lda $sp, $stack_end($sp) !gprellow
+
+ /* Install kernel gp for exception handlers. */
+ mov $gp, $16
+ call_pal PAL_wrkgp
+
+ /* Install exception handlers. */
+ ldah $16, entInt($gp) !gprelhigh
+ lda $16, entInt($16) !gprellow
+ lda $17, 0
+ call_pal PAL_wrent
+
+ ldah $16, entArith($gp) !gprelhigh
+ lda $16, entArith($16) !gprellow
+ lda $17, 1
+ call_pal PAL_wrent
+
+ ldah $16, entMM($gp) !gprelhigh
+ lda $16, entMM($16) !gprellow
+ lda $17, 2
+ call_pal PAL_wrent
+
+ ldah $16, entIF($gp) !gprelhigh
+ lda $16, entIF($16) !gprellow
+ lda $17, 3
+ call_pal PAL_wrent
+
+ ldah $16, entUna($gp) !gprelhigh
+ lda $16, entUna($16) !gprellow
+ lda $17, 4
+ call_pal PAL_wrent
+
+ ldah $16, entSys($gp) !gprelhigh
+ lda $16, entSys($16) !gprellow
+ lda $17, 5
+ call_pal PAL_wrent
+
+ /*
+ * Initialize COM1.
+ */
+ load_pci_io $1
+ lda $2, 0x87 /* outb(0x87, com1Lcr); */
+ stb $2, com1Lcr($1)
+ stb $31, com1Dlm($1) /* outb(0, com1Dlm); */
+ lda $2, 3 /* baudconst 3 => 56000 */
+ stb $2, com1Dll($1) /* outb(baudconst, com1Dll); */
+ lda $2, 0x07
+ stb $2, com1Lcr($1) /* outb(0x07, com1Lcr) */
+ lda $2, 0x0f
+ stb $2, com1Mcr($1) /* outb(0x0f, com1Mcr) */
+
+ bsr $26, main !samegp
+
+ /* fall through to _exit */
+ .end _start
+
+ .globl _exit
+ .ent _exit
+_exit:
+ .frame $sp, 0, $26, 0
+ .prologue 0
+
+ /* We cannot return an error code. */
+ call_pal PAL_halt
+ .end _exit
+
+/*
+ * We have received an exception that we don't handle. Log and exit.
+ */
+ .ent log_exit
+log_exit:
+entInt:
+entArith:
+entMM:
+entIF:
+entUna:
+entSys:
+ ldah $16, $errormsg($gp) !gprelhigh
+ lda $16, $errormsg($16) !gprellow
+ bsr $26, __sys_outs !samegp
+ bsr $26, _exit !samegp
+ .end log_exit
+
+ .section .rodata
+$errormsg:
+ .string "Terminated by exception.\n"
+ .previous
+
+ /*
+ * Helper Functions
+ */
+
+ /* Output a single character to serial port */
+ .global __sys_outc
+ .ent __sys_outc
+__sys_outc:
+ .frame $sp, 0, $26, 0
+ .prologue 0
+
+ load_pci_io $1
+
+ /*
+ * while ((inb(com1Lsr) & 0x20) == 0)
+ * continue;
+ */
+1: ldbu $0, com1Lsr($1)
+ and $0, 0x20, $0
+ beq $0, 1b
+
+ /* outb(c, com1Thr); */
+ stb $16, com1Thr($1)
+ ret
+ .end __sys_outc
+
+ /* Output a nul-terminated string to serial port */
+ .global __sys_outs
+ .ent __sys_outs
+__sys_outs:
+ .frame $sp, 0, $26, 0
+ .prologue 0
+
+ load_pci_io $1
+
+ ldbu $2, 0($16)
+ beq $2, 9f
+
+ /*
+ * while ((inb(com1Lsr) & 0x20) == 0)
+ * continue;
+ */
+1: ldbu $0, com1Lsr($1)
+ and $0, 0x20, $0
+ beq $0, 1b
+
+ /* outb(c, com1Thr); */
+ stb $2, com1Thr($1)
+
+ addq $16, 1, $16
+ ldbu $2, 0($16)
+ bne $2, 1b
+
+9: ret
+ .end __sys_outs
+
+/*
+ * Division routines that are normally in libc.
+ *
+ * These do not follow the C calling convention. Arguments are in $24+$25,
+ * the result is in $27. Register $28 may be clobbered; everything else
+ * must be saved.
+ *
+ * We store the remainder in $28, so that we can share code.
+ *
+ * We do not signal divide by zero.
+ */
+
+/*
+ * Unsigned 64-bit division.
+ */
+
+ .globl __divqu
+ .ent __divqu
+__divqu:
+ .frame $sp, 48, $23
+ subq $sp, 48, $sp
+ stq $0, 0($sp)
+ stq $1, 8($sp)
+ stq $2, 16($sp)
+ stq $3, 24($sp)
+ stq $4, 32($sp)
+ .prologue 0
+
+#define mask $0
+#define divisor $1
+#define compare $2
+#define tmp1 $3
+#define tmp2 $4
+#define quotient $27
+#define modulus $28
+
+ mov $24, modulus
+ mov $25, divisor
+ mov $31, quotient
+ mov 1, mask
+ beq $25, 9f
+
+ /* Shift left until divisor >= modulus. */
+1: cmpult divisor, modulus, compare
+ blt divisor, 2f
+ addq divisor, divisor, divisor
+ addq mask, mask, mask
+ bne compare, 1b
+
+2: addq quotient, mask, tmp2
+ srl mask, 1, mask
+ cmpule divisor, modulus, compare
+ subq modulus, divisor, tmp1
+ cmovne compare, tmp2, quotient
+ srl divisor, 1, divisor
+ cmovne compare, tmp1, modulus
+ bne mask, 2b
+
+9: ldq $0, 0($sp)
+ ldq $1, 8($sp)
+ ldq $2, 16($sp)
+ ldq $3, 24($sp)
+ ldq $4, 32($sp)
+ addq $sp, 48, $sp
+ ret $31, ($23), 1
+
+#undef mask
+#undef divisor
+#undef compare
+#undef tmp1
+#undef tmp2
+#undef quotient
+#undef modulus
+
+ .end __divqu
+
+/*
+ * Unsigned 64-bit remainder.
+ * Note that __divqu above leaves the result in $28.
+ */
+
+ .globl __remqu
+ .ent __remqu
+__remqu:
+ .frame $sp, 16, $23
+ subq $sp, 16, $sp
+ stq $23, 0($sp)
+ .prologue 0
+
+ bsr $23, __divqu
+
+ ldq $23, 0($sp)
+ mov $28, $27
+ addq $sp, 16, $sp
+ ret $31, ($23), 1
+ .end __remqu
+
+/*
+ * Signed 64-bit division.
+ */
+
+ .globl __divqs
+ .ent __divqs
+__divqs:
+ .prologue 0
+
+ /* Common case: both arguments are positive. */
+ bis $24, $25, $28
+ bge $28, __divqu
+
+ /* At least one argument is negative. */
+ subq $sp, 32, $sp
+ stq $23, 0($sp)
+ stq $24, 8($sp)
+ stq $25, 16($sp)
+
+ /* Compute absolute values. */
+ subq $31, $24, $28
+ cmovlt $24, $28, $24
+ subq $31, $25, $28
+ cmovlt $25, $28, $25
+
+ bsr $23, __divqu
+
+ ldq $24, 8($sp)
+ ldq $25, 16($sp)
+
+ /* -a / b = a / -b = -(a / b) */
+ subq $31, $27, $23
+ xor $24, $25, $28
+ cmovlt $28, $23, $27
+
+ ldq $23, 0($sp)
+ addq $sp, 32, $sp
+ ret $31, ($23), 1
+ .end __divqs
+
+/*
+ * Signed 64-bit remainder.
+ */
+
+ .globl __remqs
+ .ent __remqs
+__remqs:
+ .prologue 0
+
+ /* Common case: both arguments are positive. */
+ bis $24, $25, $28
+ bge $28, __remqu
+
+ /* At least one argument is negative. */
+ subq $sp, 32, $sp
+ stq $23, 0($sp)
+ stq $24, 8($sp)
+ stq $25, 16($sp)
+
+ /* Compute absolute values. */
+ subq $31, $24, $28
+ cmovlt $24, $28, $24
+ subq $31, $25, $28
+ cmovlt $25, $28, $25
+
+ bsr $23, __divqu
+
+ ldq $23, 0($sp)
+ ldq $24, 8($sp)
+ ldq $25, 16($sp)
+
+ /* -a % b = -(a % b); a % -b = a % b. */
+ subq $31, $28, $27
+ cmovge $24, $28, $27
+
+ addq $sp, 32, $sp
+ ret $31, ($23), 1
+ .end __remqs
+
+/*
+ * Unsigned 32-bit division.
+ */
+
+ .globl __divlu
+ .ent __divlu
+__divlu:
+ .frame $sp, 32, $23
+ subq $sp, 32, $sp
+ stq $23, 0($sp)
+ stq $24, 8($sp)
+ stq $25, 16($sp)
+ .prologue 0
+
+ /* Zero extend and use the 64-bit routine. */
+ zap $24, 0xf0, $24
+ zap $25, 0xf0, $25
+ bsr $23, __divqu
+
+ addl $27, 0, $27
+ ldq $23, 0($sp)
+ ldq $24, 8($sp)
+ ldq $25, 16($sp)
+ addq $sp, 32, $sp
+ ret $31, ($23), 1
+ .end __divlu
+
+/*
+ * Unsigned 32-bit remainder.
+ */
+
+ .globl __remlu
+ .ent __remlu
+__remlu:
+ .frame $sp, 32, $23
+ subq $sp, 32, $sp
+ stq $23, 0($sp)
+ stq $24, 8($sp)
+ stq $25, 16($sp)
+ .prologue 0
+
+ /* Zero extend and use the 64-bit routine. */
+ zap $24, 0xf0, $24
+ zap $25, 0xf0, $25
+ bsr $23, __divqu
+
+ /* Recall that the remainder is returned in $28. */
+ addl $28, 0, $27
+ ldq $23, 0($sp)
+ ldq $24, 8($sp)
+ ldq $25, 16($sp)
+ addq $sp, 32, $sp
+ ret $31, ($23), 1
+ .end __remlu
+
+/*
+ * Signed 32-bit division.
+ */
+
+ .globl __divls
+ .ent __divls
+__divls:
+ .frame $sp, 32, $23
+ subq $sp, 32, $sp
+ stq $23, 0($sp)
+ stq $24, 8($sp)
+ stq $25, 16($sp)
+ .prologue 0
+
+ /* Sign extend. */
+ addl $24, 0, $24
+ addl $25, 0, $25
+
+ /* Compute absolute values. */
+ subq $31, $24, $28
+ cmovlt $24, $28, $24
+ subq $31, $25, $28
+ cmovlt $25, $28, $25
+
+ bsr $23, __divqu
+
+ ldq $24, 8($sp)
+ ldq $25, 16($sp)
+
+ /* Negate the unsigned result, if necessary. */
+ xor $24, $25, $28
+ subl $31, $27, $23
+ addl $27, 0, $27
+ addl $28, 0, $28
+ cmovlt $28, $23, $27
+
+ ldq $23, 0($sp)
+ addq $sp, 32, $sp
+ ret $31, ($23), 1
+ .end __divls
+
+/*
+ * Signed 32-bit remainder.
+ */
+
+ .globl __remls
+ .ent __remls
+__remls:
+ .frame $sp, 32, $23
+ subq $sp, 32, $sp
+ stq $23, 0($sp)
+ stq $24, 8($sp)
+ stq $25, 16($sp)
+ .prologue 0
+
+ /* Sign extend. */
+ addl $24, 0, $24
+ addl $25, 0, $25
+
+ /* Compute absolute values. */
+ subq $31, $24, $28
+ cmovlt $24, $28, $24
+ subq $31, $25, $28
+ cmovlt $25, $28, $25
+
+ bsr $23, __divqu
+
+ ldq $23, 0($sp)
+ ldq $24, 8($sp)
+ ldq $25, 16($sp)
+
+ /* Negate the unsigned result, if necessary. */
+ subl $31, $28, $27
+ addl $28, 0, $28
+ cmovge $24, $28, $27
+
+ addq $sp, 32, $sp
+ ret $31, ($23), 1
+ .end __remls
+
+ .data
+ .p2align 4
+stack:
+ .skip 65536
+$stack_end:
+ .type stack,@object
+ .size stack, . - stack
diff --git a/tests/tcg/alpha/system/kernel.ld b/tests/tcg/alpha/system/kernel.ld
new file mode 100644
index 00000000000..d2ac6ecfeb8
--- /dev/null
+++ b/tests/tcg/alpha/system/kernel.ld
@@ -0,0 +1,30 @@
+ENTRY(_start)
+
+SECTIONS
+{
+ /* Linux kernel legacy start address. */
+ . = 0xfffffc0000310000;
+ _text = .;
+ .text : {
+ *(.text)
+ }
+ .rodata : {
+ *(.rodata)
+ }
+ _etext = .;
+
+ . = ALIGN(8192);
+ _data = .;
+ .got : {
+ *(.got)
+ }
+ .data : {
+ *(.sdata)
+ *(.data)
+ }
+ _edata = .;
+ .bss : {
+ *(.bss)
+ }
+ _end = .;
+}
--
2.20.1
next prev parent reply other threads:[~2019-05-28 10:11 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-28 9:49 [Qemu-devel] [PULL 00/28] testing/next (system tests, docker, iotests) Alex Bennée
2019-05-28 9:49 ` [Qemu-devel] [PULL 01/28] semihosting: move semihosting configuration into its own directory Alex Bennée
2019-05-28 9:49 ` [Qemu-devel] [PULL 02/28] semihosting: introduce CONFIG_SEMIHOSTING Alex Bennée
2019-05-28 9:49 ` [Qemu-devel] [PULL 03/28] semihosting: implement a semihosting console Alex Bennée
2019-05-28 9:49 ` [Qemu-devel] [PULL 04/28] semihosting: enable chardev backed output for console Alex Bennée
2019-05-28 9:49 ` [Qemu-devel] [PULL 05/28] target/arm: fixup some of the commentary for arm-semi Alex Bennée
2019-05-28 9:49 ` [Qemu-devel] [PULL 06/28] target/arm: use the common interface for WRITE0/WRITEC in arm-semi Alex Bennée
2019-05-30 11:34 ` Peter Maydell
2019-05-30 12:35 ` Alex Bennée
2019-05-30 12:36 ` Peter Maydell
2019-05-28 9:49 ` [Qemu-devel] [PULL 07/28] target/arm: add LOG_UNIMP messages to arm-semi Alex Bennée
2019-05-28 9:49 ` [Qemu-devel] [PULL 08/28] target/arm: correct return values for WRITE/READ in arm-semi Alex Bennée
2019-05-28 9:49 ` [Qemu-devel] [PULL 09/28] target/mips: only build mips-semi for softmmu Alex Bennée
2019-05-28 9:49 ` [Qemu-devel] [PULL 10/28] target/mips: convert UHI_plog to use common semihosting code Alex Bennée
2019-05-28 9:49 ` [Qemu-devel] [PULL 11/28] MAINTAINERS: update for semihostings new home Alex Bennée
2019-05-28 9:49 ` [Qemu-devel] [PULL 12/28] tests/docker: add ubuntu 18.04 Alex Bennée
2019-05-28 9:49 ` [Qemu-devel] [PULL 13/28] tests/docker: Test more components on the Fedora default image Alex Bennée
2019-05-28 9:49 ` [Qemu-devel] [PULL 14/28] tests/tcg/multiarch: add support for multiarch system tests Alex Bennée
2019-05-28 9:49 ` [Qemu-devel] [PULL 15/28] tests/tcg/multiarch: add hello world system test Alex Bennée
2019-05-28 9:49 ` [Qemu-devel] [PULL 16/28] editorconfig: add settings for .s/.S files Alex Bennée
2019-05-28 9:49 ` [Qemu-devel] [PULL 17/28] tests/tcg/aarch64: add system boot.S Alex Bennée
2019-05-28 9:49 ` [Qemu-devel] [PULL 18/28] tests/tcg/multiarch: move the system memory test Alex Bennée
2019-05-28 9:49 ` [Qemu-devel] [PULL 19/28] tests/tcg/minilib: support %c format char Alex Bennée
2019-05-28 9:49 ` [Qemu-devel] [PULL 20/28] tests/tcg/multiarch: expand system memory test to cover more Alex Bennée
2019-05-28 9:49 ` Alex Bennée [this message]
2019-05-28 9:49 ` [Qemu-devel] [PULL 22/28] .travis.yml: enable aarch64-softmmu and alpha-softmmu tcg tests Alex Bennée
2019-05-28 9:49 ` [Qemu-devel] [PULL 23/28] Makefile: fix coverage-report reference to BUILD_DIR Alex Bennée
2019-05-28 9:49 ` [Qemu-devel] [PULL 24/28] Makefile: include per-target build directories in coverage report Alex Bennée
2019-05-28 9:49 ` [Qemu-devel] [PULL 25/28] Makefile.target: support per-target coverage reports Alex Bennée
2019-05-28 9:49 ` [Qemu-devel] [PULL 26/28] tests/qemu-iotests/group: Re-use the "auto" group for tests that can always run Alex Bennée
2019-05-28 9:49 ` [Qemu-devel] [PULL 27/28] tests/qemu-iotests: re-format output to for make check-block Alex Bennée
2019-05-28 9:49 ` [Qemu-devel] [PULL 28/28] tests: Run the iotests during "make check" again Alex Bennée
2019-05-28 13:24 ` [Qemu-devel] [PULL 00/28] testing/next (system tests, docker, iotests) Peter Maydell
2019-05-28 13:47 ` Alex Bennée
2019-05-28 14:02 ` Peter Maydell
2019-05-28 15:09 ` Alex Bennée
2019-05-30 15:14 ` Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190528094953.14898-22-alex.bennee@linaro.org \
--to=alex.bennee@linaro.org \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
--cc=rth@twiddle.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).