qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Max Reitz <mreitz@redhat.com>
To: qemu-block@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>,
	Peter Maydell <peter.maydell@linaro.org>,
	qemu-devel@nongnu.org, Max Reitz <mreitz@redhat.com>
Subject: [Qemu-devel] [PULL 10/21] block/backup: move to copy_bitmap with granularity
Date: Tue, 28 May 2019 21:28:36 +0200	[thread overview]
Message-ID: <20190528192847.2730-11-mreitz@redhat.com> (raw)
In-Reply-To: <20190528192847.2730-1-mreitz@redhat.com>

From: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>

We are going to share this bitmap between backup and backup-top filter
driver, so let's share something more meaningful. It also simplifies
some calculations.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190429090842.57910-3-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
---
 block/backup.c | 48 +++++++++++++++++++++++-------------------------
 1 file changed, 23 insertions(+), 25 deletions(-)

diff --git a/block/backup.c b/block/backup.c
index db83b09a0b..98a2d2b070 100644
--- a/block/backup.c
+++ b/block/backup.c
@@ -112,7 +112,8 @@ static int coroutine_fn backup_cow_with_bounce_buffer(BackupBlockJob *job,
     int read_flags = is_write_notifier ? BDRV_REQ_NO_SERIALISING : 0;
     int write_flags = job->serialize_target_writes ? BDRV_REQ_SERIALISING : 0;
 
-    hbitmap_reset(job->copy_bitmap, start / job->cluster_size, 1);
+    assert(QEMU_IS_ALIGNED(start, job->cluster_size));
+    hbitmap_reset(job->copy_bitmap, start, job->cluster_size);
     nbytes = MIN(job->cluster_size, job->len - start);
     if (!*bounce_buffer) {
         *bounce_buffer = blk_blockalign(blk, job->cluster_size);
@@ -145,7 +146,7 @@ static int coroutine_fn backup_cow_with_bounce_buffer(BackupBlockJob *job,
 
     return nbytes;
 fail:
-    hbitmap_set(job->copy_bitmap, start / job->cluster_size, 1);
+    hbitmap_set(job->copy_bitmap, start, job->cluster_size);
     return ret;
 
 }
@@ -165,16 +166,15 @@ static int coroutine_fn backup_cow_with_offload(BackupBlockJob *job,
     int write_flags = job->serialize_target_writes ? BDRV_REQ_SERIALISING : 0;
 
     assert(QEMU_IS_ALIGNED(job->copy_range_size, job->cluster_size));
+    assert(QEMU_IS_ALIGNED(start, job->cluster_size));
     nbytes = MIN(job->copy_range_size, end - start);
     nr_clusters = DIV_ROUND_UP(nbytes, job->cluster_size);
-    hbitmap_reset(job->copy_bitmap, start / job->cluster_size,
-                  nr_clusters);
+    hbitmap_reset(job->copy_bitmap, start, job->cluster_size * nr_clusters);
     ret = blk_co_copy_range(blk, start, job->target, start, nbytes,
                             read_flags, write_flags);
     if (ret < 0) {
         trace_backup_do_cow_copy_range_fail(job, start, ret);
-        hbitmap_set(job->copy_bitmap, start / job->cluster_size,
-                    nr_clusters);
+        hbitmap_set(job->copy_bitmap, start, job->cluster_size * nr_clusters);
         return ret;
     }
 
@@ -202,7 +202,7 @@ static int coroutine_fn backup_do_cow(BackupBlockJob *job,
     cow_request_begin(&cow_request, job, start, end);
 
     while (start < end) {
-        if (!hbitmap_get(job->copy_bitmap, start / job->cluster_size)) {
+        if (!hbitmap_get(job->copy_bitmap, start)) {
             trace_backup_do_cow_skip(job, start);
             start += job->cluster_size;
             continue; /* already copied */
@@ -298,12 +298,16 @@ static void backup_clean(Job *job)
     assert(s->target);
     blk_unref(s->target);
     s->target = NULL;
+
+    if (s->copy_bitmap) {
+        hbitmap_free(s->copy_bitmap);
+        s->copy_bitmap = NULL;
+    }
 }
 
 void backup_do_checkpoint(BlockJob *job, Error **errp)
 {
     BackupBlockJob *backup_job = container_of(job, BackupBlockJob, common);
-    int64_t len;
 
     assert(block_job_driver(job) == &backup_job_driver);
 
@@ -313,8 +317,7 @@ void backup_do_checkpoint(BlockJob *job, Error **errp)
         return;
     }
 
-    len = DIV_ROUND_UP(backup_job->len, backup_job->cluster_size);
-    hbitmap_set(backup_job->copy_bitmap, 0, len);
+    hbitmap_set(backup_job->copy_bitmap, 0, backup_job->len);
 }
 
 static void backup_drain(BlockJob *job)
@@ -369,16 +372,16 @@ static int coroutine_fn backup_run_incremental(BackupBlockJob *job)
 {
     int ret;
     bool error_is_read;
-    int64_t cluster;
+    int64_t offset;
     HBitmapIter hbi;
 
     hbitmap_iter_init(&hbi, job->copy_bitmap, 0);
-    while ((cluster = hbitmap_iter_next(&hbi)) != -1) {
+    while ((offset = hbitmap_iter_next(&hbi)) != -1) {
         do {
             if (yield_and_check(job)) {
                 return 0;
             }
-            ret = backup_do_cow(job, cluster * job->cluster_size,
+            ret = backup_do_cow(job, offset,
                                 job->cluster_size, &error_is_read, false);
             if (ret < 0 && backup_error_action(job, error_is_read, -ret) ==
                            BLOCK_ERROR_ACTION_REPORT)
@@ -400,12 +403,9 @@ static void backup_incremental_init_copy_bitmap(BackupBlockJob *job)
     while (bdrv_dirty_bitmap_next_dirty_area(job->sync_bitmap,
                                              &offset, &bytes))
     {
-        uint64_t cluster = offset / job->cluster_size;
-        uint64_t end_cluster = DIV_ROUND_UP(offset + bytes, job->cluster_size);
+        hbitmap_set(job->copy_bitmap, offset, bytes);
 
-        hbitmap_set(job->copy_bitmap, cluster, end_cluster - cluster);
-
-        offset = end_cluster * job->cluster_size;
+        offset += bytes;
         if (offset >= job->len) {
             break;
         }
@@ -414,30 +414,27 @@ static void backup_incremental_init_copy_bitmap(BackupBlockJob *job)
 
     /* TODO job_progress_set_remaining() would make more sense */
     job_progress_update(&job->common.job,
-        job->len - hbitmap_count(job->copy_bitmap) * job->cluster_size);
+        job->len - hbitmap_count(job->copy_bitmap));
 }
 
 static int coroutine_fn backup_run(Job *job, Error **errp)
 {
     BackupBlockJob *s = container_of(job, BackupBlockJob, common.job);
     BlockDriverState *bs = blk_bs(s->common.blk);
-    int64_t offset, nb_clusters;
+    int64_t offset;
     int ret = 0;
 
     QLIST_INIT(&s->inflight_reqs);
     qemu_co_rwlock_init(&s->flush_rwlock);
 
-    nb_clusters = DIV_ROUND_UP(s->len, s->cluster_size);
     job_progress_set_remaining(job, s->len);
 
-    s->copy_bitmap = hbitmap_alloc(nb_clusters, 0);
     if (s->sync_mode == MIRROR_SYNC_MODE_INCREMENTAL) {
         backup_incremental_init_copy_bitmap(s);
     } else {
-        hbitmap_set(s->copy_bitmap, 0, nb_clusters);
+        hbitmap_set(s->copy_bitmap, 0, s->len);
     }
 
-
     s->before_write.notify = backup_before_write_notify;
     bdrv_add_before_write_notifier(bs, &s->before_write);
 
@@ -518,7 +515,6 @@ static int coroutine_fn backup_run(Job *job, Error **errp)
     /* wait until pending backup_do_cow() calls have completed */
     qemu_co_rwlock_wrlock(&s->flush_rwlock);
     qemu_co_rwlock_unlock(&s->flush_rwlock);
-    hbitmap_free(s->copy_bitmap);
 
     return ret;
 }
@@ -668,6 +664,8 @@ BlockJob *backup_job_create(const char *job_id, BlockDriverState *bs,
     } else {
         job->cluster_size = MAX(BACKUP_CLUSTER_SIZE_DEFAULT, bdi.cluster_size);
     }
+
+    job->copy_bitmap = hbitmap_alloc(len, ctz32(job->cluster_size));
     job->use_copy_range = true;
     job->copy_range_size = MIN_NON_ZERO(blk_get_max_transfer(job->common.blk),
                                         blk_get_max_transfer(job->target));
-- 
2.21.0



  parent reply	other threads:[~2019-05-28 19:39 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-28 19:28 [Qemu-devel] [PULL 00/21] Block patches Max Reitz
2019-05-28 19:28 ` [Qemu-devel] [PULL 01/21] qcow2.h: add missing include Max Reitz
2019-05-28 19:28 ` [Qemu-devel] [PULL 02/21] qcow2: add separate file for threaded data processing functions Max Reitz
2019-05-28 19:28 ` [Qemu-devel] [PULL 03/21] qcow2-threads: use thread_pool_submit_co Max Reitz
2019-05-28 19:28 ` [Qemu-devel] [PULL 04/21] qcow2-threads: qcow2_co_do_compress: protect queuing by mutex Max Reitz
2019-05-28 19:28 ` [Qemu-devel] [PULL 05/21] qcow2-threads: split out generic path Max Reitz
2019-05-28 19:28 ` [Qemu-devel] [PULL 06/21] qcow2: qcow2_co_preadv: improve locking Max Reitz
2019-05-28 19:28 ` [Qemu-devel] [PULL 07/21] qcow2: bdrv_co_pwritev: move encryption code out of the lock Max Reitz
2019-05-28 19:28 ` [Qemu-devel] [PULL 08/21] qcow2: do encryption in threads Max Reitz
2019-05-28 19:28 ` [Qemu-devel] [PULL 09/21] block/backup: simplify backup_incremental_init_copy_bitmap Max Reitz
2019-05-28 19:28 ` Max Reitz [this message]
2019-05-28 19:28 ` [Qemu-devel] [PULL 11/21] block/backup: refactor and tolerate unallocated cluster skipping Max Reitz
2019-05-28 19:28 ` [Qemu-devel] [PULL 12/21] block/backup: unify different modes code path Max Reitz
2019-05-28 19:28 ` [Qemu-devel] [PULL 13/21] block/backup: refactor: split out backup_calculate_cluster_size Max Reitz
2019-05-28 19:28 ` [Qemu-devel] [PULL 14/21] block: Use bdrv_unref_child() for all children in bdrv_close() Max Reitz
2019-05-28 19:28 ` [Qemu-devel] [PULL 15/21] block: Make bdrv_root_attach_child() unref child_bs on failure Max Reitz
2019-05-28 19:28 ` [Qemu-devel] [PULL 16/21] qemu-img: rebase: Reuse parent BlockDriverState Max Reitz
2019-05-28 19:28 ` [Qemu-devel] [PULL 17/21] qemu-img: rebase: Reduce reads on in-chain rebase Max Reitz
2019-05-28 19:28 ` [Qemu-devel] [PULL 18/21] qemu-img: rebase: Reuse in-chain BlockDriverState Max Reitz
2019-05-28 19:28 ` [Qemu-devel] [PULL 19/21] qcow2: skip writing zero buffers to empty COW areas Max Reitz
2019-05-28 19:28 ` [Qemu-devel] [PULL 20/21] qcow2-bitmap: initialize bitmap directory alignment Max Reitz
2019-05-28 19:28 ` [Qemu-devel] [PULL 21/21] blockdev: loosen restrictions on drive-backup source node Max Reitz
2019-05-30 11:09 ` [Qemu-devel] [PULL 00/21] Block patches Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190528192847.2730-11-mreitz@redhat.com \
    --to=mreitz@redhat.com \
    --cc=kwolf@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).