qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
To: Peter Xu <peterx@redhat.com>
Cc: Laurent Vivier <lvivier@redhat.com>,
	Paolo Bonzini <pbonzini@redhat.com>,
	qemu-devel@nongnu.org, Juan Quintela <quintela@redhat.com>
Subject: Re: [Qemu-devel] [PATCH v4 04/11] bitmap: Add bitmap_copy_with_{src|dst}_offset()
Date: Mon, 3 Jun 2019 10:30:00 +0100	[thread overview]
Message-ID: <20190603093000.GC2640@work-vm> (raw)
In-Reply-To: <20190603065056.25211-5-peterx@redhat.com>

* Peter Xu (peterx@redhat.com) wrote:
> These helpers copy the source bitmap to destination bitmap with a
> shift either on the src or dst bitmap.
> 
> Meanwhile, we never have bitmap tests but we should.
> 
> This patch also introduces the initial test cases for utils/bitmap.c
> but it only tests the newly introduced functions.
> 
> Signed-off-by: Peter Xu <peterx@redhat.com>

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

> ---
>  include/qemu/bitmap.h  |  9 +++++
>  tests/Makefile.include |  2 +
>  tests/test-bitmap.c    | 72 +++++++++++++++++++++++++++++++++++
>  util/bitmap.c          | 85 ++++++++++++++++++++++++++++++++++++++++++
>  4 files changed, 168 insertions(+)
>  create mode 100644 tests/test-bitmap.c
> 
> diff --git a/include/qemu/bitmap.h b/include/qemu/bitmap.h
> index 5c313346b9..82a1d2f41f 100644
> --- a/include/qemu/bitmap.h
> +++ b/include/qemu/bitmap.h
> @@ -41,6 +41,10 @@
>   * bitmap_find_next_zero_area(buf, len, pos, n, mask)	Find bit free area
>   * bitmap_to_le(dst, src, nbits)      Convert bitmap to little endian
>   * bitmap_from_le(dst, src, nbits)    Convert bitmap from little endian
> + * bitmap_copy_with_src_offset(dst, src, offset, nbits)
> + *                                    *dst = *src (with an offset into src)
> + * bitmap_copy_with_dst_offset(dst, src, offset, nbits)
> + *                                    *dst = *src (with an offset into dst)
>   */
>  
>  /*
> @@ -271,4 +275,9 @@ void bitmap_to_le(unsigned long *dst, const unsigned long *src,
>  void bitmap_from_le(unsigned long *dst, const unsigned long *src,
>                      long nbits);
>  
> +void bitmap_copy_with_src_offset(unsigned long *dst, const unsigned long *src,
> +                                 unsigned long offset, unsigned long nbits);
> +void bitmap_copy_with_dst_offset(unsigned long *dst, const unsigned long *src,
> +                                 unsigned long shift, unsigned long nbits);
> +
>  #endif /* BITMAP_H */
> diff --git a/tests/Makefile.include b/tests/Makefile.include
> index 1865f6b322..5e2d7dddff 100644
> --- a/tests/Makefile.include
> +++ b/tests/Makefile.include
> @@ -64,6 +64,7 @@ check-unit-y += tests/test-opts-visitor$(EXESUF)
>  check-unit-$(CONFIG_BLOCK) += tests/test-coroutine$(EXESUF)
>  check-unit-y += tests/test-visitor-serialization$(EXESUF)
>  check-unit-y += tests/test-iov$(EXESUF)
> +check-unit-y += tests/test-bitmap$(EXESUF)
>  check-unit-$(CONFIG_BLOCK) += tests/test-aio$(EXESUF)
>  check-unit-$(CONFIG_BLOCK) += tests/test-aio-multithread$(EXESUF)
>  check-unit-$(CONFIG_BLOCK) += tests/test-throttle$(EXESUF)
> @@ -529,6 +530,7 @@ tests/test-image-locking$(EXESUF): tests/test-image-locking.o $(test-block-obj-y
>  tests/test-thread-pool$(EXESUF): tests/test-thread-pool.o $(test-block-obj-y)
>  tests/test-iov$(EXESUF): tests/test-iov.o $(test-util-obj-y)
>  tests/test-hbitmap$(EXESUF): tests/test-hbitmap.o $(test-util-obj-y) $(test-crypto-obj-y)
> +tests/test-bitmap$(EXESUF): tests/test-bitmap.o $(test-util-obj-y)
>  tests/test-x86-cpuid$(EXESUF): tests/test-x86-cpuid.o
>  tests/test-xbzrle$(EXESUF): tests/test-xbzrle.o migration/xbzrle.o migration/page_cache.o $(test-util-obj-y)
>  tests/test-cutils$(EXESUF): tests/test-cutils.o util/cutils.o $(test-util-obj-y)
> diff --git a/tests/test-bitmap.c b/tests/test-bitmap.c
> new file mode 100644
> index 0000000000..43f7ba26c5
> --- /dev/null
> +++ b/tests/test-bitmap.c
> @@ -0,0 +1,72 @@
> +/*
> + * SPDX-License-Identifier: GPL-2.0-or-later
> + *
> + * Bitmap.c unit-tests.
> + *
> + * Copyright (C) 2019, Red Hat, Inc.
> + *
> + * Author: Peter Xu <peterx@redhat.com>
> + */
> +
> +#include <stdlib.h>
> +#include "qemu/osdep.h"
> +#include "qemu/bitmap.h"
> +
> +#define BMAP_SIZE  1024
> +
> +static void check_bitmap_copy_with_offset(void)
> +{
> +    unsigned long *bmap1, *bmap2, *bmap3, total;
> +
> +    bmap1 = bitmap_new(BMAP_SIZE);
> +    bmap2 = bitmap_new(BMAP_SIZE);
> +    bmap3 = bitmap_new(BMAP_SIZE);
> +
> +    bmap1[0] = random();
> +    bmap1[1] = random();
> +    bmap1[2] = random();
> +    bmap1[3] = random();
> +    total = BITS_PER_LONG * 4;
> +
> +    /* Shift 115 bits into bmap2 */
> +    bitmap_copy_with_dst_offset(bmap2, bmap1, 115, total);
> +    /* Shift another 85 bits into bmap3 */
> +    bitmap_copy_with_dst_offset(bmap3, bmap2, 85, total + 115);
> +    /* Shift back 200 bits back */
> +    bitmap_copy_with_src_offset(bmap2, bmap3, 200, total);
> +
> +    g_assert_cmpmem(bmap1, total / sizeof(unsigned long),
> +                    bmap2, total / sizeof(unsigned long));
> +
> +    bitmap_clear(bmap1, 0, BMAP_SIZE);
> +    /* Set bits in bmap1 are 100-245 */
> +    bitmap_set(bmap1, 100, 145);
> +
> +    /* Set bits in bmap2 are 60-205 */
> +    bitmap_copy_with_src_offset(bmap2, bmap1, 40, 250);
> +    g_assert_cmpint(find_first_bit(bmap2, 60), ==, 60);
> +    g_assert_cmpint(find_next_zero_bit(bmap2, 205, 60), ==, 205);
> +    g_assert(test_bit(205, bmap2) == 0);
> +
> +    /* Set bits in bmap3 are 135-280 */
> +    bitmap_copy_with_dst_offset(bmap3, bmap1, 35, 250);
> +    g_assert_cmpint(find_first_bit(bmap3, 135), ==, 135);
> +    g_assert_cmpint(find_next_zero_bit(bmap3, 280, 135), ==, 280);
> +    g_assert(test_bit(280, bmap3) == 0);
> +
> +    g_free(bmap1);
> +    g_free(bmap2);
> +    g_free(bmap3);
> +}
> +
> +int main(int argc, char **argv)
> +{
> +    g_test_init(&argc, &argv, NULL);
> +
> +    g_test_add_func("/bitmap/bitmap_copy_with_offset",
> +                    check_bitmap_copy_with_offset);
> +
> +    g_test_run();
> +
> +    return 0;
> +}
> diff --git a/util/bitmap.c b/util/bitmap.c
> index cb618c65a5..1753ff7f5b 100644
> --- a/util/bitmap.c
> +++ b/util/bitmap.c
> @@ -402,3 +402,88 @@ void bitmap_to_le(unsigned long *dst, const unsigned long *src,
>  {
>      bitmap_to_from_le(dst, src, nbits);
>  }
> +
> +/*
> + * Copy "src" bitmap with a positive offset and put it into the "dst"
> + * bitmap.  The caller needs to make sure the bitmap size of "src"
> + * is bigger than (shift + nbits).
> + */
> +void bitmap_copy_with_src_offset(unsigned long *dst, const unsigned long *src,
> +                                 unsigned long shift, unsigned long nbits)
> +{
> +    unsigned long left_mask, right_mask, last_mask;
> +
> +    /* Proper shift src pointer to the first word to copy from */
> +    src += BIT_WORD(shift);
> +    shift %= BITS_PER_LONG;
> +
> +    if (!shift) {
> +        /* Fast path */
> +        bitmap_copy(dst, src, nbits);
> +        return;
> +    }
> +
> +    right_mask = (1ul << shift) - 1;
> +    left_mask = ~right_mask;
> +
> +    while (nbits >= BITS_PER_LONG) {
> +        *dst = (*src & left_mask) >> shift;
> +        *dst |= (src[1] & right_mask) << (BITS_PER_LONG - shift);
> +        dst++;
> +        src++;
> +        nbits -= BITS_PER_LONG;
> +    }
> +
> +    if (nbits > BITS_PER_LONG - shift) {
> +        *dst = (*src & left_mask) >> shift;
> +        nbits -= BITS_PER_LONG - shift;
> +        last_mask = (1ul << nbits) - 1;
> +        *dst |= (src[1] & last_mask) << (BITS_PER_LONG - shift);
> +    } else if (nbits) {
> +        last_mask = (1ul << nbits) - 1;
> +        *dst = (*src >> shift) & last_mask;
> +    }
> +}
> +
> +/*
> + * Copy "src" bitmap into the "dst" bitmap with an offset in the
> + * "dst".  The caller needs to make sure the bitmap size of "dst" is
> + * bigger than (shift + nbits).
> + */
> +void bitmap_copy_with_dst_offset(unsigned long *dst, const unsigned long *src,
> +                                 unsigned long shift, unsigned long nbits)
> +{
> +    unsigned long left_mask, right_mask, last_mask;
> +
> +    /* Proper shift dst pointer to the first word to copy from */
> +    dst += BIT_WORD(shift);
> +    shift %= BITS_PER_LONG;
> +
> +    if (!shift) {
> +        /* Fast path */
> +        bitmap_copy(dst, src, nbits);
> +        return;
> +    }
> +
> +    right_mask = (1ul << (BITS_PER_LONG - shift)) - 1;
> +    left_mask = ~right_mask;
> +
> +    *dst &= (1ul << shift) - 1;
> +    while (nbits >= BITS_PER_LONG) {
> +        *dst |= (*src & right_mask) << shift;
> +        dst[1] = (*src & left_mask) >> (BITS_PER_LONG - shift);
> +        dst++;
> +        src++;
> +        nbits -= BITS_PER_LONG;
> +    }
> +
> +    if (nbits > BITS_PER_LONG - shift) {
> +        *dst |= (*src & right_mask) << shift;
> +        nbits -= BITS_PER_LONG - shift;
> +        last_mask = ((1ul << nbits) - 1) << (BITS_PER_LONG - shift);
> +        dst[1] = (*src & last_mask) >> (BITS_PER_LONG - shift);
> +    } else if (nbits) {
> +        last_mask = (1ul << nbits) - 1;
> +        *dst |= (*src & last_mask) << shift;
> +    }
> +}
> -- 
> 2.17.1
> 
--
Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK


  reply	other threads:[~2019-06-03  9:33 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-03  6:50 [Qemu-devel] [PATCH v4 00/11] kvm/migration: support KVM_CLEAR_DIRTY_LOG Peter Xu
2019-06-03  6:50 ` [Qemu-devel] [PATCH v4 01/11] migration: No need to take rcu during sync_dirty_bitmap Peter Xu
2019-06-03  6:50 ` [Qemu-devel] [PATCH v4 02/11] memory: Remove memory_region_get_dirty() Peter Xu
2019-06-03  6:50 ` [Qemu-devel] [PATCH v4 03/11] memory: Don't set migration bitmap when without migration Peter Xu
2019-06-03  6:50 ` [Qemu-devel] [PATCH v4 04/11] bitmap: Add bitmap_copy_with_{src|dst}_offset() Peter Xu
2019-06-03  9:30   ` Dr. David Alan Gilbert [this message]
2019-06-03  6:50 ` [Qemu-devel] [PATCH v4 05/11] memory: Pass mr into snapshot_and_clear_dirty Peter Xu
2019-06-03  9:36   ` Dr. David Alan Gilbert
2019-06-03  6:50 ` [Qemu-devel] [PATCH v4 06/11] memory: Introduce memory listener hook log_clear() Peter Xu
2019-06-03  6:50 ` [Qemu-devel] [PATCH v4 07/11] kvm: Update comments for sync_dirty_bitmap Peter Xu
2019-06-03  6:50 ` [Qemu-devel] [PATCH v4 08/11] kvm: Persistent per kvmslot dirty bitmap Peter Xu
2019-06-03  9:49   ` Dr. David Alan Gilbert
2019-06-03  6:50 ` [Qemu-devel] [PATCH v4 09/11] kvm: Introduce slots lock for memory listener Peter Xu
2019-06-03  6:50 ` [Qemu-devel] [PATCH v4 10/11] kvm: Support KVM_CLEAR_DIRTY_LOG Peter Xu
2019-06-03  6:50 ` [Qemu-devel] [PATCH v4 11/11] migration: Split log_clear() into smaller chunks Peter Xu
2019-06-03  9:57   ` Dr. David Alan Gilbert

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190603093000.GC2640@work-vm \
    --to=dgilbert@redhat.com \
    --cc=lvivier@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=peterx@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=quintela@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).