From: "Alex Bennée" <alex.bennee@linaro.org>
To: peter.maydell@linaro.org
Cc: "Philippe Mathieu-Daudé" <philmd@redhat.com>,
"Alex Bennée" <alex.bennee@linaro.org>,
qemu-devel@nongnu.org, "Jon Doron" <arilou@gmail.com>
Subject: [Qemu-devel] [PULL 52/52] gdbstub: Implement qemu physical memory mode
Date: Fri, 7 Jun 2019 10:05:51 +0100 [thread overview]
Message-ID: <20190607090552.12434-53-alex.bennee@linaro.org> (raw)
In-Reply-To: <20190607090552.12434-1-alex.bennee@linaro.org>
From: Jon Doron <arilou@gmail.com>
Add a new query/set which changes the memory GDB sees to physical memory
only.
gdb> maint packet qqemu.PhyMemMode
will reply the current phy_mem_mode state (1 for enabled, 0 for disabled)
gdb> maint packet Qqemu.PhyMemMode:1
Will make GDB read/write only to physical memory, set to 0 to disable
Signed-off-by: Jon Doron <arilou@gmail.com>
Message-Id: <20190529064148.19856-21-arilou@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
diff --git a/gdbstub.c b/gdbstub.c
index 12671e6e11..14a9c22f5a 100644
--- a/gdbstub.c
+++ b/gdbstub.c
@@ -46,11 +46,27 @@
#define GDB_ATTACHED "1"
#endif
+#ifndef CONFIG_USER_ONLY
+static int phy_memory_mode;
+#endif
+
static inline int target_memory_rw_debug(CPUState *cpu, target_ulong addr,
uint8_t *buf, int len, bool is_write)
{
- CPUClass *cc = CPU_GET_CLASS(cpu);
+ CPUClass *cc;
+#ifndef CONFIG_USER_ONLY
+ if (phy_memory_mode) {
+ if (is_write) {
+ cpu_physical_memory_write(addr, buf, len);
+ } else {
+ cpu_physical_memory_read(addr, buf, len);
+ }
+ return 0;
+ }
+#endif
+
+ cc = CPU_GET_CLASS(cpu);
if (cc->memory_rw_debug) {
return cc->memory_rw_debug(cpu, addr, buf, len, is_write);
}
@@ -2132,8 +2148,36 @@ static void handle_query_attached(GdbCmdContext *gdb_ctx, void *user_ctx)
static void handle_query_qemu_supported(GdbCmdContext *gdb_ctx, void *user_ctx)
{
- put_packet(gdb_ctx->s, "sstepbits;sstep");
+ snprintf(gdb_ctx->str_buf, sizeof(gdb_ctx->str_buf), "sstepbits;sstep");
+#ifndef CONFIG_USER_ONLY
+ pstrcat(gdb_ctx->str_buf, sizeof(gdb_ctx->str_buf), ";PhyMemMode");
+#endif
+ put_packet(gdb_ctx->s, gdb_ctx->str_buf);
+}
+
+#ifndef CONFIG_USER_ONLY
+static void handle_query_qemu_phy_mem_mode(GdbCmdContext *gdb_ctx,
+ void *user_ctx)
+{
+ snprintf(gdb_ctx->str_buf, sizeof(gdb_ctx->str_buf), "%d", phy_memory_mode);
+ put_packet(gdb_ctx->s, gdb_ctx->str_buf);
+}
+
+static void handle_set_qemu_phy_mem_mode(GdbCmdContext *gdb_ctx, void *user_ctx)
+{
+ if (!gdb_ctx->num_params) {
+ put_packet(gdb_ctx->s, "E22");
+ return;
+ }
+
+ if (!gdb_ctx->params[0].val_ul) {
+ phy_memory_mode = 0;
+ } else {
+ phy_memory_mode = 1;
+ }
+ put_packet(gdb_ctx->s, "OK");
}
+#endif
static GdbCmdParseEntry gdb_gen_query_set_common_table[] = {
/* Order is important if has same prefix */
@@ -2215,6 +2259,12 @@ static GdbCmdParseEntry gdb_gen_query_table[] = {
.handler = handle_query_qemu_supported,
.cmd = "qemu.Supported",
},
+#ifndef CONFIG_USER_ONLY
+ {
+ .handler = handle_query_qemu_phy_mem_mode,
+ .cmd = "qemu.PhyMemMode",
+ },
+#endif
};
static GdbCmdParseEntry gdb_gen_set_table[] = {
@@ -2225,6 +2275,14 @@ static GdbCmdParseEntry gdb_gen_set_table[] = {
.cmd_startswith = 1,
.schema = "l0"
},
+#ifndef CONFIG_USER_ONLY
+ {
+ .handler = handle_set_qemu_phy_mem_mode,
+ .cmd = "qemu.PhyMemMode:",
+ .cmd_startswith = 1,
+ .schema = "l0"
+ },
+#endif
};
static void handle_gen_query(GdbCmdContext *gdb_ctx, void *user_ctx)
--
2.20.1
next prev parent reply other threads:[~2019-06-07 10:45 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-07 9:04 [Qemu-devel] [PULL 00/52] testing, gdbstub and cputlb fixes Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 01/52] editorconfig: add setting for shell scripts Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 02/52] qemu-io-cmds: use clock_gettime for benchmarking Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 03/52] tests/docker: Update the Fedora image to Fedora 30 Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 04/52] tests/docker: Update the Fedora cross compile images to 30 Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 05/52] tests/docker: Update the Ubuntu image to 19.04 Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 06/52] .travis.yml: bump gcc sanitiser job to gcc-9 Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 07/52] .travis.yml: add clang ubsan job Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 08/52] tests/vm: Use python configured on build Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 09/52] tests/vm: Port basevm to Python 3 Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 10/52] tests/vm: Fix build-centos docker-based tests run Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 11/52] tests/vm: Add missing variables on help Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 12/52] scripts: use git archive in archive-source Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 13/52] tests/vm: python3 fixes Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 14/52] tests/vm: send proxy environment variables over ssh Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 15/52] tests/vm: use ssh with pty unconditionally Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 16/52] tests/vm: run test builds on snapshot Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 17/52] tests/vm: proper guest shutdown Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 18/52] tests/vm: add vm-boot-{ssh, serial}-<guest> targets Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 19/52] tests/vm: add DEBUG=1 to help text Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 20/52] tests/vm: serial console support helpers Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 21/52] tests/vm: openbsd autoinstall, using serial console Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 22/52] tests/vm: freebsd " Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 23/52] tests/vm: netbsd " Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 24/52] tests/vm: fedora " Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 25/52] tests/vm: ubuntu.i386: apt proxy setup Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 26/52] semihosting: split console_out into string and char versions Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 27/52] cputlb: use uint64_t for interim values for unaligned load Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 28/52] tests/tcg: better detect truncated reads Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 29/52] tests/tcg: clean-up VPATH/TESTS for i386 Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 30/52] tests/tcg/x86_64: add a PVH crt.o for x86_64 system tests Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 31/52] MAINTAINERS: put myself forward for gdbstub Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 32/52] cputlb: cast size_t to target_ulong before using for address masks Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 33/52] gdbstub: Add infrastructure to parse cmd packets Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 34/52] gdbstub: Implement deatch (D pkt) with new infra Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 35/52] gdbstub: Implement thread_alive (T " Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 36/52] gdbstub: Implement continue (c " Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 37/52] gdbstub: Implement continue with signal (C " Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 38/52] gdbstub: Implement set_thread (H " Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 39/52] gdbstub: Implement breakpoint commands (Z/z " Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 40/52] gdbstub: Implement set register (P " Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 41/52] gdbstub: Implement get register (p " Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 42/52] gdbstub: Implement write memory (M " Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 43/52] gdbstub: Implement read memory (m " Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 44/52] gdbstub: Implement write all registers (G " Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 45/52] gdbstub: Implement read all registers (g " Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 46/52] gdbstub: Implement file io (F " Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 47/52] gdbstub: Implement step (s " Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 48/52] gdbstub: Implement v commands " Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 49/52] gdbstub: Implement generic set/query (Q/q pkt) " Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 50/52] gdbstub: Implement target halted (? " Alex Bennée
2019-06-07 9:05 ` [Qemu-devel] [PULL 51/52] gdbstub: Clear unused variables in gdb_handle_packet Alex Bennée
2019-06-07 9:05 ` Alex Bennée [this message]
2019-06-07 9:50 ` [Qemu-devel] [PULL 00/52] testing, gdbstub and cputlb fixes Peter Maydell
2019-06-07 13:25 ` Alex Bennée
2019-06-11 14:18 ` Alex Bennée
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190607090552.12434-53-alex.bennee@linaro.org \
--to=alex.bennee@linaro.org \
--cc=arilou@gmail.com \
--cc=peter.maydell@linaro.org \
--cc=philmd@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).