qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Sam Eiderman <shmuel.eiderman@oracle.com>
To: kwolf@redhat.com, qemu-block@nongnu.org, qemu-devel@nongnu.org,
	mreitz@redhat.com, seabios@seabios.org, kraxel@redhat.com,
	kevin@koconnor.net
Cc: liran.alon@oracle.com, shmuel.eiderman@oracle.com,
	karl.heubaum@oracle.com, arbel.moshe@oracle.com
Subject: [Qemu-devel] [QEMU] [PATCH v2 7/8] bootdevice: FW_CFG interface for LCHS values
Date: Wed, 12 Jun 2019 14:59:38 +0300	[thread overview]
Message-ID: <20190612115939.23825-8-shmuel.eiderman@oracle.com> (raw)
In-Reply-To: <20190612115939.23825-1-shmuel.eiderman@oracle.com>

Using fw_cfg, supply logical CHS values directly from QEMU to the BIOS.

Non-standard logical geometries break under QEMU.

A virtual disk which contains an operating system which depends on
logical geometries (consistent values being reported from BIOS INT13
AH=08) will most likely break under QEMU/SeaBIOS if it has non-standard
logical geometries - for example 56 SPT (sectors per track).
No matter what QEMU will report - SeaBIOS, for large enough disks - will
use LBA translation, which will report 63 SPT instead.

In addition we cannot force SeaBIOS to rely on physical geometries at
all. A virtio-blk-pci virtual disk with 255 phyiscal heads cannot
report more than 16 physical heads when moved to an IDE controller,
since the ATA spec allows a maximum of 16 heads - this is an artifact of
virtualization.

By supplying the logical geometries directly we are able to support such
"exotic" disks.

We serialize this information in a similar way to the "bootorder"
interface.
The fw_cfg entry is "bootdevices" and it serializes a struct.
At the moment the struct holds the values of logical CHS values but it
can be expanded easily due to the extendable ABI implemented.

(In the future, we can pass the bootindex through "bootdevices" instead
"bootorder" - unifying all bootdevice information in one fw_cfg value)

The PV interface through fw_cfg could have also been implemented using
device specific keys, e.g.: "/etc/bootdevice/%s/logical_geometry" where
%s is the device name QEMU produces - but this implementation would
require much more code refactoring, both in QEMU and SeaBIOS, so the
current implementation was chosen.

Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com>
Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com>
Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com>
---
 bootdevice.c            | 42 ++++++++++++++++++++++++++++++++++++++++++
 hw/nvram/fw_cfg.c       | 14 +++++++++++---
 include/sysemu/sysemu.h |  1 +
 3 files changed, 54 insertions(+), 3 deletions(-)

diff --git a/bootdevice.c b/bootdevice.c
index 2b12fb85a4..84c2a83f25 100644
--- a/bootdevice.c
+++ b/bootdevice.c
@@ -405,3 +405,45 @@ void del_boot_device_lchs(DeviceState *dev, const char *suffix)
         }
     }
 }
+
+typedef struct QEMU_PACKED BootDeviceEntrySerialized {
+    /* Do not change field order - add new fields below */
+    uint32_t lcyls;
+    uint32_t lheads;
+    uint32_t lsecs;
+} BootDeviceEntrySerialized;
+
+/* Serialized as: struct size (4) + (device name\0 + device struct) x devices */
+char *get_boot_devices_info(size_t *size)
+{
+    FWLCHSEntry *i;
+    BootDeviceEntrySerialized s;
+    size_t total = 0;
+    char *list = NULL;
+
+    list = g_malloc0(sizeof(uint32_t));
+    *((uint32_t *)list) = (uint32_t)sizeof(s);
+    total = sizeof(uint32_t);
+
+    QTAILQ_FOREACH(i, &fw_lchs, link) {
+        char *bootpath;
+        size_t len;
+
+        bootpath = get_boot_device_path(i->dev, false, i->suffix);
+        s.lcyls = i->lcyls;
+        s.lheads = i->lheads;
+        s.lsecs = i->lsecs;
+
+        len = strlen(bootpath) + 1;
+        list = g_realloc(list, total + len + sizeof(s));
+        memcpy(&list[total], bootpath, len);
+        memcpy(&list[total + len], &s, sizeof(s));
+        total += len + sizeof(s);
+
+        g_free(bootpath);
+    }
+
+    *size = total;
+
+    return list;
+}
diff --git a/hw/nvram/fw_cfg.c b/hw/nvram/fw_cfg.c
index 9f7b7789bc..008b21542f 100644
--- a/hw/nvram/fw_cfg.c
+++ b/hw/nvram/fw_cfg.c
@@ -916,13 +916,21 @@ void *fw_cfg_modify_file(FWCfgState *s, const char *filename,
 
 static void fw_cfg_machine_reset(void *opaque)
 {
+    MachineClass *mc = MACHINE_GET_CLASS(qdev_get_machine());
+    FWCfgState *s = opaque;
     void *ptr;
     size_t len;
-    FWCfgState *s = opaque;
-    char *bootindex = get_boot_devices_list(&len);
+    char *buf;
 
-    ptr = fw_cfg_modify_file(s, "bootorder", (uint8_t *)bootindex, len);
+    buf = get_boot_devices_list(&len);
+    ptr = fw_cfg_modify_file(s, "bootorder", (uint8_t *)buf, len);
     g_free(ptr);
+
+    if (!mc->legacy_fw_cfg_order) {
+        buf = get_boot_devices_info(&len);
+        ptr = fw_cfg_modify_file(s, "bootdevices", (uint8_t *)buf, len);
+        g_free(ptr);
+    }
 }
 
 static void fw_cfg_machine_ready(struct Notifier *n, void *data)
diff --git a/include/sysemu/sysemu.h b/include/sysemu/sysemu.h
index 173dfbb539..f0552006f4 100644
--- a/include/sysemu/sysemu.h
+++ b/include/sysemu/sysemu.h
@@ -174,6 +174,7 @@ void validate_bootdevices(const char *devices, Error **errp);
 void add_boot_device_lchs(DeviceState *dev, const char *suffix,
                           uint32_t lcyls, uint32_t lheads, uint32_t lsecs);
 void del_boot_device_lchs(DeviceState *dev, const char *suffix);
+char *get_boot_devices_info(size_t *size);
 
 /* handler to set the boot_device order for a specific type of MachineClass */
 typedef void QEMUBootSetHandler(void *opaque, const char *boot_order,
-- 
2.13.3



  parent reply	other threads:[~2019-06-12 12:13 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-12 11:59 [Qemu-devel] [QEMU] [PATCH v2 0/8] Add Qemu to SeaBIOS LCHS interface Sam Eiderman
2019-06-12 11:59 ` [Qemu-devel] [QEMU] [PATCH v2 1/8] block: Refactor macros - fix tabbing Sam Eiderman
2019-06-12 11:59 ` [Qemu-devel] [QEMU] [PATCH v2 2/8] block: Support providing LCHS from user Sam Eiderman
2019-06-12 11:59 ` [Qemu-devel] [QEMU] [PATCH v2 3/8] bootdevice: Add interface to gather LCHS Sam Eiderman
2019-06-12 11:59 ` [Qemu-devel] [QEMU] [PATCH v2 4/8] scsi: Propagate unrealize() callback to scsi-hd Sam Eiderman
2019-06-12 11:59 ` [Qemu-devel] [QEMU] [PATCH v2 5/8] bootdevice: Gather LCHS from all relevant devices Sam Eiderman
2019-06-12 11:59 ` [Qemu-devel] [QEMU] [PATCH v2 6/8] bootdevice: Refactor get_boot_devices_list Sam Eiderman
2019-06-12 11:59 ` Sam Eiderman [this message]
2019-06-17  7:20   ` [Qemu-devel] [QEMU] [PATCH v2 7/8] bootdevice: FW_CFG interface for LCHS values Gerd Hoffmann
2019-06-17  7:36     ` Sam Eiderman
2019-06-17  8:38       ` Gerd Hoffmann
2019-06-17 10:08         ` Sam Eiderman
2019-06-17 14:48       ` Kevin O'Connor
2019-06-17 15:13         ` Sam Eiderman
2019-06-12 11:59 ` [Qemu-devel] [QEMU] [PATCH v2 8/8] hd-geo-test: Add tests for lchs override Sam Eiderman
2019-06-12 12:33 ` [Qemu-devel] [SeaBIOS] [QEMU] [PATCH v2 0/8] Add Qemu to SeaBIOS LCHS interface no-reply
2019-06-12 13:06 ` [Qemu-devel] " Gerd Hoffmann
2019-06-12 13:30   ` Sam Eiderman
2019-06-12 19:18     ` Gerd Hoffmann
2019-06-13  7:41       ` Sam Eiderman
2019-06-13  7:44         ` Sam Eiderman
2019-06-13  9:38         ` Gerd Hoffmann
2019-06-13 11:45           ` Sam Eiderman
2019-06-14  4:43             ` Gerd Hoffmann
2019-06-14  9:37               ` Sam Eiderman
2019-06-17  6:50                 ` Gerd Hoffmann
2019-06-17  7:59                   ` Sam Eiderman
2019-06-12 13:51 ` [Qemu-devel] [SeaBIOS] " no-reply

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190612115939.23825-8-shmuel.eiderman@oracle.com \
    --to=shmuel.eiderman@oracle.com \
    --cc=arbel.moshe@oracle.com \
    --cc=karl.heubaum@oracle.com \
    --cc=kevin@koconnor.net \
    --cc=kraxel@redhat.com \
    --cc=kwolf@redhat.com \
    --cc=liran.alon@oracle.com \
    --cc=mreitz@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=seabios@seabios.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).