qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 21/48] target/arm: Convert VFP VLDR and VSTR to decodetree
Date: Thu, 13 Jun 2019 13:14:06 +0100	[thread overview]
Message-ID: <20190613121433.5246-22-peter.maydell@linaro.org> (raw)
In-Reply-To: <20190613121433.5246-1-peter.maydell@linaro.org>

Convert the VFP single load/store insns VLDR and VSTR to decodetree.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
---
 target/arm/translate-vfp.inc.c | 73 ++++++++++++++++++++++++++++++++++
 target/arm/translate.c         | 22 +---------
 target/arm/vfp.decode          |  7 ++++
 3 files changed, 82 insertions(+), 20 deletions(-)

diff --git a/target/arm/translate-vfp.inc.c b/target/arm/translate-vfp.inc.c
index 5f081221b83..40f2cac3e2e 100644
--- a/target/arm/translate-vfp.inc.c
+++ b/target/arm/translate-vfp.inc.c
@@ -853,3 +853,76 @@ static bool trans_VMOV_64_dp(DisasContext *s, arg_VMOV_64_sp *a)
 
     return true;
 }
+
+static bool trans_VLDR_VSTR_sp(DisasContext *s, arg_VLDR_VSTR_sp *a)
+{
+    uint32_t offset;
+    TCGv_i32 addr;
+
+    if (!vfp_access_check(s)) {
+        return true;
+    }
+
+    offset = a->imm << 2;
+    if (!a->u) {
+        offset = -offset;
+    }
+
+    if (s->thumb && a->rn == 15) {
+        /* This is actually UNPREDICTABLE */
+        addr = tcg_temp_new_i32();
+        tcg_gen_movi_i32(addr, s->pc & ~2);
+    } else {
+        addr = load_reg(s, a->rn);
+    }
+    tcg_gen_addi_i32(addr, addr, offset);
+    if (a->l) {
+        gen_vfp_ld(s, false, addr);
+        gen_mov_vreg_F0(false, a->vd);
+    } else {
+        gen_mov_F0_vreg(false, a->vd);
+        gen_vfp_st(s, false, addr);
+    }
+    tcg_temp_free_i32(addr);
+
+    return true;
+}
+
+static bool trans_VLDR_VSTR_dp(DisasContext *s, arg_VLDR_VSTR_sp *a)
+{
+    uint32_t offset;
+    TCGv_i32 addr;
+
+    /* UNDEF accesses to D16-D31 if they don't exist */
+    if (!dc_isar_feature(aa32_fp_d32, s) && (a->vd & 0x10)) {
+        return false;
+    }
+
+    if (!vfp_access_check(s)) {
+        return true;
+    }
+
+    offset = a->imm << 2;
+    if (!a->u) {
+        offset = -offset;
+    }
+
+    if (s->thumb && a->rn == 15) {
+        /* This is actually UNPREDICTABLE */
+        addr = tcg_temp_new_i32();
+        tcg_gen_movi_i32(addr, s->pc & ~2);
+    } else {
+        addr = load_reg(s, a->rn);
+    }
+    tcg_gen_addi_i32(addr, addr, offset);
+    if (a->l) {
+        gen_vfp_ld(s, true, addr);
+        gen_mov_vreg_F0(true, a->vd);
+    } else {
+        gen_mov_F0_vreg(true, a->vd);
+        gen_vfp_st(s, true, addr);
+    }
+    tcg_temp_free_i32(addr);
+
+    return true;
+}
diff --git a/target/arm/translate.c b/target/arm/translate.c
index eb217af579a..0c92f3ed4ec 100644
--- a/target/arm/translate.c
+++ b/target/arm/translate.c
@@ -3713,26 +3713,8 @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn)
             else
                 rd = VFP_SREG_D(insn);
             if ((insn & 0x01200000) == 0x01000000) {
-                /* Single load/store */
-                offset = (insn & 0xff) << 2;
-                if ((insn & (1 << 23)) == 0)
-                    offset = -offset;
-                if (s->thumb && rn == 15) {
-                    /* This is actually UNPREDICTABLE */
-                    addr = tcg_temp_new_i32();
-                    tcg_gen_movi_i32(addr, s->pc & ~2);
-                } else {
-                    addr = load_reg(s, rn);
-                }
-                tcg_gen_addi_i32(addr, addr, offset);
-                if (insn & (1 << 20)) {
-                    gen_vfp_ld(s, dp, addr);
-                    gen_mov_vreg_F0(dp, rd);
-                } else {
-                    gen_mov_F0_vreg(dp, rd);
-                    gen_vfp_st(s, dp, addr);
-                }
-                tcg_temp_free_i32(addr);
+                /* Already handled by decodetree */
+                return 1;
             } else {
                 /* load/store multiple */
                 int w = insn & (1 << 21);
diff --git a/target/arm/vfp.decode b/target/arm/vfp.decode
index 134f1c9ef58..8fa7fa0bead 100644
--- a/target/arm/vfp.decode
+++ b/target/arm/vfp.decode
@@ -71,3 +71,10 @@ VMOV_64_sp   ---- 1100 010 op:1 rt2:4 rt:4 1010 00.1 .... \
              vm=%vm_sp
 VMOV_64_dp   ---- 1100 010 op:1 rt2:4 rt:4 1011 00.1 .... \
              vm=%vm_dp
+
+# Note that the half-precision variants of VLDR and VSTR are
+# not part of this decodetree at all because they have bits [9:8] == 0b01
+VLDR_VSTR_sp ---- 1101 u:1 .0 l:1 rn:4 .... 1010 imm:8 \
+             vd=%vd_sp
+VLDR_VSTR_dp ---- 1101 u:1 .0 l:1 rn:4 .... 1011 imm:8 \
+             vd=%vd_dp
-- 
2.20.1



  parent reply	other threads:[~2019-06-13 12:48 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-13 12:13 [Qemu-devel] [PULL 00/48] target-arm queue Peter Maydell
2019-06-13 12:13 ` [Qemu-devel] [PULL 01/48] target/arm: Vectorize USHL and SSHL Peter Maydell
2019-06-13 14:11   ` Peter Maydell
2019-06-13 12:13 ` [Qemu-devel] [PULL 02/48] target/arm: Use tcg_gen_gvec_bitsel Peter Maydell
2019-06-13 12:13 ` [Qemu-devel] [PULL 03/48] target/arm: Implement NSACR gating of floating point Peter Maydell
2019-06-13 12:13 ` [Qemu-devel] [PULL 04/48] hw/arm/smmuv3: Fix decoding of ID register range Peter Maydell
2019-06-13 12:13 ` [Qemu-devel] [PULL 05/48] hw/core/bus.c: Only the main system bus can have no parent Peter Maydell
2019-06-13 12:13 ` [Qemu-devel] [PULL 06/48] target/arm: Fix output of PAuth Auth Peter Maydell
2019-06-13 12:13 ` [Qemu-devel] [PULL 07/48] decodetree: Fix comparison of Field Peter Maydell
2019-06-13 12:13 ` [Qemu-devel] [PULL 08/48] target/arm: Add stubs for AArch32 VFP decodetree Peter Maydell
2019-06-13 12:13 ` [Qemu-devel] [PULL 09/48] target/arm: Factor out VFP access checking code Peter Maydell
2019-06-13 12:13 ` [Qemu-devel] [PULL 10/48] target/arm: Fix Cortex-R5F MVFR values Peter Maydell
2019-06-13 12:13 ` [Qemu-devel] [PULL 11/48] target/arm: Explicitly enable VFP short-vectors for aarch32 -cpu max Peter Maydell
2019-06-13 12:13 ` [Qemu-devel] [PULL 12/48] target/arm: Convert the VSEL instructions to decodetree Peter Maydell
2019-06-13 12:13 ` [Qemu-devel] [PULL 13/48] target/arm: Convert VMINNM, VMAXNM " Peter Maydell
2019-06-13 12:13 ` [Qemu-devel] [PULL 14/48] target/arm: Convert VRINTA/VRINTN/VRINTP/VRINTM " Peter Maydell
2019-06-13 12:14 ` [Qemu-devel] [PULL 15/48] target/arm: Convert VCVTA/VCVTN/VCVTP/VCVTM " Peter Maydell
2019-06-13 12:14 ` [Qemu-devel] [PULL 16/48] target/arm: Move the VFP trans_* functions to translate-vfp.inc.c Peter Maydell
2019-06-13 12:14 ` [Qemu-devel] [PULL 17/48] target/arm: Add helpers for VFP register loads and stores Peter Maydell
2019-06-13 12:14 ` [Qemu-devel] [PULL 18/48] target/arm: Convert "double-precision" register moves to decodetree Peter Maydell
2019-06-13 12:14 ` [Qemu-devel] [PULL 19/48] target/arm: Convert "single-precision" " Peter Maydell
2019-06-13 12:14 ` [Qemu-devel] [PULL 20/48] target/arm: Convert VFP two-register transfer insns " Peter Maydell
2019-06-13 12:14 ` Peter Maydell [this message]
2019-06-13 12:14 ` [Qemu-devel] [PULL 22/48] target/arm: Convert the VFP load/store multiple " Peter Maydell
2019-06-13 12:14 ` [Qemu-devel] [PULL 23/48] target/arm: Remove VLDR/VSTR/VLDM/VSTM use of cpu_F0s and cpu_F0d Peter Maydell
2019-06-13 12:14 ` [Qemu-devel] [PULL 24/48] target/arm: Convert VFP VMLA to decodetree Peter Maydell
2019-06-13 12:14 ` [Qemu-devel] [PULL 25/48] target/arm: Convert VFP VMLS " Peter Maydell
2019-06-13 12:14 ` [Qemu-devel] [PULL 26/48] target/arm: Convert VFP VNMLS " Peter Maydell
2019-06-13 12:14 ` [Qemu-devel] [PULL 27/48] target/arm: Convert VFP VNMLA " Peter Maydell
2019-06-13 12:14 ` [Qemu-devel] [PULL 28/48] target/arm: Convert VMUL " Peter Maydell
2019-06-13 12:14 ` [Qemu-devel] [PULL 29/48] target/arm: Convert VNMUL " Peter Maydell
2019-06-13 12:14 ` [Qemu-devel] [PULL 30/48] target/arm: Convert VADD " Peter Maydell
2019-06-13 12:14 ` [Qemu-devel] [PULL 31/48] target/arm: Convert VSUB " Peter Maydell
2019-06-13 12:14 ` [Qemu-devel] [PULL 32/48] target/arm: Convert VDIV " Peter Maydell
2019-06-13 12:14 ` [Qemu-devel] [PULL 33/48] target/arm: Convert VFP fused multiply-add insns " Peter Maydell
2019-06-13 12:14 ` [Qemu-devel] [PULL 34/48] target/arm: Convert VMOV (imm) " Peter Maydell
2019-06-13 12:14 ` [Qemu-devel] [PULL 35/48] target/arm: Convert VABS " Peter Maydell
2019-06-13 12:14 ` [Qemu-devel] [PULL 36/48] target/arm: Convert VNEG " Peter Maydell
2019-06-13 12:14 ` [Qemu-devel] [PULL 37/48] target/arm: Convert VSQRT " Peter Maydell
2019-06-13 12:14 ` [Qemu-devel] [PULL 38/48] target/arm: Convert VMOV (register) " Peter Maydell
2019-06-13 12:14 ` [Qemu-devel] [PULL 39/48] target/arm: Convert VFP comparison insns " Peter Maydell
2019-06-13 12:14 ` [Qemu-devel] [PULL 40/48] target/arm: Convert the VCVT-from-f16 " Peter Maydell
2019-06-13 12:14 ` [Qemu-devel] [PULL 41/48] target/arm: Convert the VCVT-to-f16 " Peter Maydell
2019-06-13 12:14 ` [Qemu-devel] [PULL 42/48] target/arm: Convert VFP round " Peter Maydell
2019-06-13 12:14 ` [Qemu-devel] [PULL 43/48] target/arm: Convert double-single precision conversion " Peter Maydell
2019-06-13 12:14 ` [Qemu-devel] [PULL 44/48] target/arm: Convert integer-to-float " Peter Maydell
2019-06-13 12:14 ` [Qemu-devel] [PULL 45/48] target/arm: Convert VJCVT " Peter Maydell
2019-06-13 12:14 ` [Qemu-devel] [PULL 46/48] target/arm: Convert VCVT fp/fixed-point conversion insns " Peter Maydell
2019-06-13 12:14 ` [Qemu-devel] [PULL 47/48] target/arm: Convert float-to-integer VCVT " Peter Maydell
2019-06-13 12:14 ` [Qemu-devel] [PULL 48/48] target/arm: Fix short-vector increment behaviour Peter Maydell
2019-06-13 14:18 ` [Qemu-devel] [PULL 00/48] target-arm queue no-reply
2019-06-13 16:51 ` no-reply

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190613121433.5246-22-peter.maydell@linaro.org \
    --to=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).