qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Yoshinori Sato <ysato@users.sourceforge.jp>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, richard.henderson@linaro.org,
	Yoshinori Sato <ysato@users.sourceforge.jp>,
	philmd@redhat.com
Subject: [Qemu-devel] [PATCH v20 17/24] target/rx: Move rx_load_image to rx-virt.
Date: Sun, 16 Jun 2019 23:28:29 +0900	[thread overview]
Message-ID: <20190616142836.10614-18-ysato@users.sourceforge.jp> (raw)
In-Reply-To: <20190616142836.10614-1-ysato@users.sourceforge.jp>

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
 hw/rx/rx-virt.c | 22 ++++++++++++++++++++++
 target/rx/cpu.c | 22 ----------------------
 2 files changed, 22 insertions(+), 22 deletions(-)

diff --git a/hw/rx/rx-virt.c b/hw/rx/rx-virt.c
index ed0a3a1da0..4cfe2e3123 100644
--- a/hw/rx/rx-virt.c
+++ b/hw/rx/rx-virt.c
@@ -32,6 +32,28 @@
 /* Same address of GDB integrated simulator */
 #define SDRAM_BASE 0x01000000
 
+static void rx_load_image(RXCPU *cpu, const char *filename,
+                          uint32_t start, uint32_t size)
+{
+    static uint32_t extable[32];
+    long kernel_size;
+    int i;
+
+    kernel_size = load_image_targphys(filename, start, size);
+    if (kernel_size < 0) {
+        fprintf(stderr, "qemu: could not load kernel '%s'\n", filename);
+        exit(1);
+    }
+    cpu->env.pc = start;
+
+    /* setup exception trap trampoline */
+    /* linux kernel only works little-endian mode */
+    for (i = 0; i < ARRAY_SIZE(extable); i++) {
+        extable[i] = cpu_to_le32(0x10 + i * 4);
+    }
+    rom_add_blob_fixed("extable", extable, sizeof(extable), 0xffffff80);
+}
+
 static void rxvirt_init(MachineState *machine)
 {
     RX62NState *s = g_new(RX62NState, 1);
diff --git a/target/rx/cpu.c b/target/rx/cpu.c
index e3d76af55d..ea38639f47 100644
--- a/target/rx/cpu.c
+++ b/target/rx/cpu.c
@@ -215,25 +215,3 @@ static void rx_cpu_register_types(void)
 }
 
 type_init(rx_cpu_register_types)
-
-void rx_load_image(RXCPU *cpu, const char *filename,
-                   uint32_t start, uint32_t size)
-{
-    static uint32_t extable[32];
-    long kernel_size;
-    int i;
-
-    kernel_size = load_image_targphys(filename, start, size);
-    if (kernel_size < 0) {
-        fprintf(stderr, "qemu: could not load kernel '%s'\n", filename);
-        exit(1);
-    }
-    cpu->env.pc = start;
-
-    /* setup exception trap trampoline */
-    /* linux kernel only works little-endian mode */
-    for (i = 0; i < ARRAY_SIZE(extable); i++) {
-        extable[i] = cpu_to_le32(0x10 + i * 4);
-    }
-    rom_add_blob_fixed("extable", extable, sizeof(extable), 0xffffff80);
-}
-- 
2.11.0



  parent reply	other threads:[~2019-06-16 14:43 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-16 14:28 [Qemu-devel] [PATCH v20 00/24] Add RX archtecture support Yoshinori Sato
2019-06-16 14:28 ` [Qemu-devel] [PATCH v20 01/24] target/rx: TCG translation Yoshinori Sato
2019-06-16 14:28 ` [Qemu-devel] [PATCH v20 02/24] target/rx: TCG helper Yoshinori Sato
2019-06-16 14:28 ` [Qemu-devel] [PATCH v20 03/24] target/rx: CPU definition Yoshinori Sato
2019-06-16 18:13   ` Igor Mammedov
2019-06-16 14:28 ` [Qemu-devel] [PATCH v20 04/24] target/rx: Follow the change of tcg Yoshinori Sato
2019-06-16 14:28 ` [Qemu-devel] [PATCH v20 05/24] target/rx: simplify rx_cpu_class_by_name Yoshinori Sato
2019-06-16 18:33   ` Igor Mammedov
2019-06-16 14:28 ` [Qemu-devel] [PATCH v20 06/24] target/rx: RX disassembler Yoshinori Sato
2019-06-16 14:28 ` [Qemu-devel] [PATCH v20 07/24] target/rx: Disassemble rx_index_addr into a string Yoshinori Sato
2019-06-16 14:28 ` [Qemu-devel] [PATCH v20 08/24] target/rx: Replace operand with prt_ldmi in disassembler Yoshinori Sato
2019-06-16 14:28 ` [Qemu-devel] [PATCH v20 09/24] target/rx: Use prt_ldmi for XCHG_mr disassembly Yoshinori Sato
2019-06-16 14:28 ` [Qemu-devel] [PATCH v20 10/24] target/rx: Emit all disassembly in one prt() Yoshinori Sato
2019-06-16 14:28 ` [Qemu-devel] [PATCH v20 11/24] target/rx: Collect all bytes during disassembly Yoshinori Sato
2019-06-16 14:28 ` [Qemu-devel] [PATCH v20 12/24] target/rx: Dump bytes for each insn " Yoshinori Sato
2019-06-16 14:28 ` [Qemu-devel] [PATCH v20 13/24] hw/intc: RX62N interrupt controller (ICUa) Yoshinori Sato
2019-06-16 14:28 ` [Qemu-devel] [PATCH v20 14/24] hw/timer: RX62N internal timer modules Yoshinori Sato
2019-06-16 14:28 ` [Qemu-devel] [PATCH v20 15/24] hw/char: RX62N serial communication interface (SCI) Yoshinori Sato
2019-06-16 14:28 ` [Qemu-devel] [PATCH v20 16/24] hw/rx: RX Target hardware definition Yoshinori Sato
2019-06-16 14:28 ` Yoshinori Sato [this message]
2019-06-16 18:49   ` [Qemu-devel] [PATCH v20 17/24] target/rx: Move rx_load_image to rx-virt Igor Mammedov
2019-06-16 14:28 ` [Qemu-devel] [PATCH v20 18/24] hw/rx: Honor -accel qtest Yoshinori Sato
2019-06-16 14:28 ` [Qemu-devel] [PATCH v20 19/24] hw/rx: Restrict the RX62N microcontroller to the RX62N CPU core Yoshinori Sato
2019-06-16 14:28 ` [Qemu-devel] [PATCH v20 20/24] qemu/bitops.h: Add extract8 and extract16 Yoshinori Sato
2019-06-16 14:28 ` [Qemu-devel] [PATCH v20 21/24] hw/registerfields.h: Add 8bit and 16bit register macros Yoshinori Sato
2019-06-16 19:06   ` Igor Mammedov
2019-06-16 14:28 ` [Qemu-devel] [PATCH v20 22/24] Add rx-softmmu Yoshinori Sato
2019-06-16 14:28 ` [Qemu-devel] [PATCH v20 23/24] MAINTAINERS: Add RX Yoshinori Sato
2019-06-16 14:28 ` [Qemu-devel] [PATCH v20 24/24] BootLinuxConsoleTest: Test the RX-Virt machine Yoshinori Sato
2019-06-16 15:18 ` [Qemu-devel] [PATCH v20 00/24] Add RX archtecture support no-reply
2019-06-16 19:08   ` Igor Mammedov
2019-06-16 15:55 ` no-reply
2019-06-16 16:45 ` no-reply
2019-06-16 17:26 ` no-reply
2019-06-16 17:33 ` no-reply
2019-06-16 18:00 ` no-reply
2019-06-16 18:18 ` no-reply

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190616142836.10614-18-ysato@users.sourceforge.jp \
    --to=ysato@users.sourceforge.jp \
    --cc=peter.maydell@linaro.org \
    --cc=philmd@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=richard.henderson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).