From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 41/46] target/arm/vfp_helper: Extract vfp_set_fpscr_to_host()
Date: Mon, 1 Jul 2019 17:39:38 +0100 [thread overview]
Message-ID: <20190701163943.22313-42-peter.maydell@linaro.org> (raw)
In-Reply-To: <20190701163943.22313-1-peter.maydell@linaro.org>
From: Philippe Mathieu-Daudé <philmd@redhat.com>
The vfp_set_fpscr() helper contains code specific to the host
floating point implementation (here the SoftFloat library).
Extract this code to vfp_set_fpscr_to_host().
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190701132516.26392-16-philmd@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/vfp_helper.c | 127 +++++++++++++++++++++-------------------
1 file changed, 66 insertions(+), 61 deletions(-)
diff --git a/target/arm/vfp_helper.c b/target/arm/vfp_helper.c
index d54e3253240..b19a395b67d 100644
--- a/target/arm/vfp_helper.c
+++ b/target/arm/vfp_helper.c
@@ -81,71 +81,11 @@ static inline int vfp_exceptbits_to_host(int target_bits)
return host_bits;
}
-uint32_t HELPER(vfp_get_fpscr)(CPUARMState *env)
-{
- uint32_t i, fpscr;
-
- fpscr = env->vfp.xregs[ARM_VFP_FPSCR]
- | (env->vfp.vec_len << 16)
- | (env->vfp.vec_stride << 20);
-
- i = get_float_exception_flags(&env->vfp.fp_status);
- i |= get_float_exception_flags(&env->vfp.standard_fp_status);
- /* FZ16 does not generate an input denormal exception. */
- i |= (get_float_exception_flags(&env->vfp.fp_status_f16)
- & ~float_flag_input_denormal);
- fpscr |= vfp_exceptbits_from_host(i);
-
- i = env->vfp.qc[0] | env->vfp.qc[1] | env->vfp.qc[2] | env->vfp.qc[3];
- fpscr |= i ? FPCR_QC : 0;
-
- return fpscr;
-}
-
-uint32_t vfp_get_fpscr(CPUARMState *env)
-{
- return HELPER(vfp_get_fpscr)(env);
-}
-
-void HELPER(vfp_set_fpscr)(CPUARMState *env, uint32_t val)
+static void vfp_set_fpscr_to_host(CPUARMState *env, uint32_t val)
{
int i;
uint32_t changed = env->vfp.xregs[ARM_VFP_FPSCR];
- /* When ARMv8.2-FP16 is not supported, FZ16 is RES0. */
- if (!cpu_isar_feature(aa64_fp16, env_archcpu(env))) {
- val &= ~FPCR_FZ16;
- }
-
- if (arm_feature(env, ARM_FEATURE_M)) {
- /*
- * M profile FPSCR is RES0 for the QC, STRIDE, FZ16, LEN bits
- * and also for the trapped-exception-handling bits IxE.
- */
- val &= 0xf7c0009f;
- }
-
- /*
- * We don't implement trapped exception handling, so the
- * trap enable bits, IDE|IXE|UFE|OFE|DZE|IOE are all RAZ/WI (not RES0!)
- *
- * If we exclude the exception flags, IOC|DZC|OFC|UFC|IXC|IDC
- * (which are stored in fp_status), and the other RES0 bits
- * in between, then we clear all of the low 16 bits.
- */
- env->vfp.xregs[ARM_VFP_FPSCR] = val & 0xf7c80000;
- env->vfp.vec_len = (val >> 16) & 7;
- env->vfp.vec_stride = (val >> 20) & 3;
-
- /*
- * The bit we set within fpscr_q is arbitrary; the register as a
- * whole being zero/non-zero is what counts.
- */
- env->vfp.qc[0] = val & FPCR_QC;
- env->vfp.qc[1] = 0;
- env->vfp.qc[2] = 0;
- env->vfp.qc[3] = 0;
-
changed ^= val;
if (changed & (3 << 22)) {
i = (val >> 22) & 3;
@@ -193,6 +133,71 @@ void HELPER(vfp_set_fpscr)(CPUARMState *env, uint32_t val)
set_float_exception_flags(0, &env->vfp.standard_fp_status);
}
+uint32_t HELPER(vfp_get_fpscr)(CPUARMState *env)
+{
+ uint32_t i, fpscr;
+
+ fpscr = env->vfp.xregs[ARM_VFP_FPSCR]
+ | (env->vfp.vec_len << 16)
+ | (env->vfp.vec_stride << 20);
+
+ i = get_float_exception_flags(&env->vfp.fp_status);
+ i |= get_float_exception_flags(&env->vfp.standard_fp_status);
+ /* FZ16 does not generate an input denormal exception. */
+ i |= (get_float_exception_flags(&env->vfp.fp_status_f16)
+ & ~float_flag_input_denormal);
+ fpscr |= vfp_exceptbits_from_host(i);
+
+ i = env->vfp.qc[0] | env->vfp.qc[1] | env->vfp.qc[2] | env->vfp.qc[3];
+ fpscr |= i ? FPCR_QC : 0;
+
+ return fpscr;
+}
+
+uint32_t vfp_get_fpscr(CPUARMState *env)
+{
+ return HELPER(vfp_get_fpscr)(env);
+}
+
+void HELPER(vfp_set_fpscr)(CPUARMState *env, uint32_t val)
+{
+ /* When ARMv8.2-FP16 is not supported, FZ16 is RES0. */
+ if (!cpu_isar_feature(aa64_fp16, env_archcpu(env))) {
+ val &= ~FPCR_FZ16;
+ }
+
+ if (arm_feature(env, ARM_FEATURE_M)) {
+ /*
+ * M profile FPSCR is RES0 for the QC, STRIDE, FZ16, LEN bits
+ * and also for the trapped-exception-handling bits IxE.
+ */
+ val &= 0xf7c0009f;
+ }
+
+ /*
+ * We don't implement trapped exception handling, so the
+ * trap enable bits, IDE|IXE|UFE|OFE|DZE|IOE are all RAZ/WI (not RES0!)
+ *
+ * If we exclude the exception flags, IOC|DZC|OFC|UFC|IXC|IDC
+ * (which are stored in fp_status), and the other RES0 bits
+ * in between, then we clear all of the low 16 bits.
+ */
+ env->vfp.xregs[ARM_VFP_FPSCR] = val & 0xf7c80000;
+ env->vfp.vec_len = (val >> 16) & 7;
+ env->vfp.vec_stride = (val >> 20) & 3;
+
+ /*
+ * The bit we set within fpscr_q is arbitrary; the register as a
+ * whole being zero/non-zero is what counts.
+ */
+ env->vfp.qc[0] = val & FPCR_QC;
+ env->vfp.qc[1] = 0;
+ env->vfp.qc[2] = 0;
+ env->vfp.qc[3] = 0;
+
+ vfp_set_fpscr_to_host(env, val);
+}
+
void vfp_set_fpscr(CPUARMState *env, uint32_t val)
{
HELPER(vfp_set_fpscr)(env, val);
--
2.20.1
next prev parent reply other threads:[~2019-07-02 2:20 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-01 16:38 [Qemu-devel] [PULL 00/46] target-arm queue Peter Maydell
2019-07-01 16:38 ` [Qemu-devel] [PULL 01/46] hw/arm/boot: fix direct kernel boot with initrd Peter Maydell
2019-07-01 16:38 ` [Qemu-devel] [PULL 02/46] hw/arm/msf2-som: Exit when the cpu is not the expected one Peter Maydell
2019-07-01 16:39 ` [Qemu-devel] [PULL 03/46] hw/arm/virt: Add support for Cortex-A7 Peter Maydell
2019-07-01 16:39 ` [Qemu-devel] [PULL 04/46] i.mx7d: Add no-op/unimplemented APBH DMA module Peter Maydell
2019-07-01 16:39 ` [Qemu-devel] [PULL 05/46] i.mx7d: Add no-op/unimplemented PCIE PHY IP block Peter Maydell
2019-07-01 16:39 ` [Qemu-devel] [PULL 06/46] pci: designware: Update MSI mapping unconditionally Peter Maydell
2019-07-01 16:39 ` [Qemu-devel] [PULL 07/46] pci: designware: Update MSI mapping when MSI address changes Peter Maydell
2019-07-01 16:39 ` [Qemu-devel] [PULL 08/46] i.mx7d: pci: Update PCI IRQ mapping to match HW Peter Maydell
2019-07-01 16:39 ` [Qemu-devel] [PULL 09/46] aspeed: add a per SoC mapping for the interrupt space Peter Maydell
2019-07-01 16:39 ` [Qemu-devel] [PULL 10/46] aspeed: add a per SoC mapping for the memory space Peter Maydell
2019-07-01 16:39 ` [Qemu-devel] [PULL 11/46] hw: timer: Add ASPEED RTC device Peter Maydell
2019-07-01 16:39 ` [Qemu-devel] [PULL 12/46] hw/arm/aspeed: Add RTC to SoC Peter Maydell
2019-07-01 16:39 ` [Qemu-devel] [PULL 13/46] aspeed: introduce a configurable number of CPU per machine Peter Maydell
2019-07-01 16:39 ` [Qemu-devel] [PULL 14/46] aspeed: add support for multiple NICs Peter Maydell
2019-07-01 16:39 ` [Qemu-devel] [PULL 15/46] aspeed/timer: Fix behaviour running Linux Peter Maydell
2019-07-01 16:39 ` [Qemu-devel] [PULL 16/46] aspeed/timer: Status register contains reload for stopped timer Peter Maydell
2019-07-01 16:39 ` [Qemu-devel] [PULL 17/46] aspeed/timer: Fix match calculations Peter Maydell
2019-07-01 16:39 ` [Qemu-devel] [PULL 18/46] aspeed/timer: Ensure positive muldiv delta Peter Maydell
2019-07-01 16:39 ` [Qemu-devel] [PULL 19/46] aspeed: remove the "ram" link Peter Maydell
2019-07-01 16:39 ` [Qemu-devel] [PULL 20/46] aspeed: add a RAM memory region container Peter Maydell
2019-07-01 16:39 ` [Qemu-devel] [PULL 21/46] aspeed/smc: add a 'sdram_base' property Peter Maydell
2019-07-01 16:39 ` [Qemu-devel] [PULL 22/46] aspeed: Add support for the swift-bmc board Peter Maydell
2019-07-01 16:39 ` [Qemu-devel] [PULL 23/46] hw/misc/aspeed_xdma: New device Peter Maydell
2019-07-01 16:39 ` [Qemu-devel] [PULL 24/46] aspeed: vic: Add support for legacy register interface Peter Maydell
2019-07-01 16:39 ` [Qemu-devel] [PULL 25/46] aspeed: Link SCU to the watchdog Peter Maydell
2019-07-01 16:39 ` [Qemu-devel] [PULL 26/46] hw/arm: Add arm SBSA reference machine, skeleton part Peter Maydell
2019-07-01 16:39 ` [Qemu-devel] [PULL 27/46] hw/arm: Add arm SBSA reference machine, devices part Peter Maydell
2019-07-01 16:39 ` [Qemu-devel] [PULL 28/46] target/arm: Makefile cleanup (Aarch64) Peter Maydell
2019-07-01 16:39 ` [Qemu-devel] [PULL 29/46] target/arm: Makefile cleanup (ARM) Peter Maydell
2019-07-01 16:39 ` [Qemu-devel] [PULL 30/46] target/arm: Makefile cleanup (KVM) Peter Maydell
2019-07-01 16:39 ` [Qemu-devel] [PULL 31/46] target/arm: Makefile cleanup (softmmu) Peter Maydell
2019-07-01 16:39 ` [Qemu-devel] [PULL 32/46] target/arm: Add copyright boilerplate Peter Maydell
2019-07-01 16:39 ` [Qemu-devel] [PULL 33/46] target/arm/helper: Remove unused include Peter Maydell
2019-07-01 16:39 ` [Qemu-devel] [PULL 34/46] target/arm: Fix multiline comment syntax Peter Maydell
2019-07-01 16:39 ` [Qemu-devel] [PULL 35/46] target/arm: Fix coding style issues Peter Maydell
2019-07-01 16:39 ` [Qemu-devel] [PULL 36/46] target/arm: Move the DC ZVA helper into op_helper Peter Maydell
2019-07-01 16:39 ` [Qemu-devel] [PULL 37/46] target/arm: Move CPU state dumping routines to cpu.c Peter Maydell
2019-07-01 16:39 ` [Qemu-devel] [PULL 38/46] target/arm: Declare get_phys_addr() function publicly Peter Maydell
2019-07-01 16:39 ` [Qemu-devel] [PULL 39/46] target/arm: Move TLB related routines to tlb_helper.c Peter Maydell
2019-07-01 16:39 ` [Qemu-devel] [PULL 40/46] target/arm/vfp_helper: Move code around Peter Maydell
2019-07-01 16:39 ` Peter Maydell [this message]
2019-07-05 7:24 ` [Qemu-devel] [PULL 41/46] target/arm/vfp_helper: Extract vfp_set_fpscr_to_host() Laurent Desnogues
2019-07-05 9:00 ` Philippe Mathieu-Daudé
2019-07-01 16:39 ` [Qemu-devel] [PULL 42/46] target/arm/vfp_helper: Extract vfp_set_fpscr_from_host() Peter Maydell
2019-07-01 16:39 ` [Qemu-devel] [PULL 43/46] target/arm/vfp_helper: Restrict the SoftFloat use to TCG Peter Maydell
2019-07-01 16:39 ` [Qemu-devel] [PULL 44/46] target/arm: Restrict PSCI " Peter Maydell
2019-07-01 16:39 ` [Qemu-devel] [PULL 45/46] target/arm: Declare arm_log_exception() function publicly Peter Maydell
2019-07-01 16:39 ` [Qemu-devel] [PULL 46/46] target/arm: Declare some M-profile functions publicly Peter Maydell
2019-07-02 13:07 ` [Qemu-devel] [PULL 00/46] target-arm queue Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190701163943.22313-42-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).