qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Philippe Mathieu-Daudé" <philmd@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Peter Maydell" <peter.maydell@linaro.org>,
	"Michael S. Tsirkin" <mst@redhat.com>,
	"Max Filippov" <jcmvbkbc@gmail.com>,
	"Gerd Hoffmann" <kraxel@redhat.com>,
	"Edgar E. Iglesias" <edgar.iglesias@gmail.com>,
	qemu-block@nongnu.org, "Aleksandar Rikalo" <arikalo@wavecomp.com>,
	"Alex Bennée" <alex.bennee@linaro.org>,
	"Markus Armbruster" <armbru@redhat.com>,
	"Laszlo Ersek" <lersek@redhat.com>,
	"David Gibson" <david@gibson.dropbear.id.au>,
	"Philippe Mathieu-Daudé" <philmd@redhat.com>,
	"Eduardo Habkost" <ehabkost@redhat.com>,
	qemu-arm@nongnu.org, "Alistair Francis" <alistair23@gmail.com>,
	"John Snow" <jsnow@redhat.com>,
	"Richard Henderson" <rth@twiddle.net>,
	"Kevin Wolf" <kwolf@redhat.com>, "Max Reitz" <mreitz@redhat.com>,
	"Michael Walle" <michael@walle.cc>,
	qemu-ppc@nongnu.org, "Wei Yang" <richardw.yang@linux.intel.com>,
	"Aleksandar Markovic" <amarkovic@wavecomp.com>,
	"Paolo Bonzini" <pbonzini@redhat.com>,
	"Aurelien Jarno" <aurelien@aurel32.net>
Subject: [Qemu-devel] [PATCH v2 9/9] hw/block/pflash_cfi01: Hold the PRI table offset in a variable
Date: Tue,  2 Jul 2019 02:13:01 +0200	[thread overview]
Message-ID: <20190702001301.4768-10-philmd@redhat.com> (raw)
In-Reply-To: <20190702001301.4768-1-philmd@redhat.com>

Manufacturers are allowed to move the PRI table, this is why the
offset is queryable via fixed offsets 0x15/0x16.
Add a variable to hold the offset, so it will be easier to later
move the PRI table.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 hw/block/pflash_cfi01.c | 41 ++++++++++++++++++++++++++---------------
 1 file changed, 26 insertions(+), 15 deletions(-)

diff --git a/hw/block/pflash_cfi01.c b/hw/block/pflash_cfi01.c
index e891112b67..f65840eb2b 100644
--- a/hw/block/pflash_cfi01.c
+++ b/hw/block/pflash_cfi01.c
@@ -762,6 +762,7 @@ static void pflash_cfi01_realize(DeviceState *dev, Error **errp)
     }
 
     /* Hardcoded CFI table */
+    const uint16_t pri_ofs = 0x31;
     /* Standard "QRY" string */
     pfl->cfi_table[0x10] = 'Q';
     pfl->cfi_table[0x11] = 'R';
@@ -770,14 +771,17 @@ static void pflash_cfi01_realize(DeviceState *dev, Error **errp)
     pfl->cfi_table[0x13] = 0x01;
     pfl->cfi_table[0x14] = 0x00;
     /* Primary extended table address (none) */
-    pfl->cfi_table[0x15] = 0x31;
-    pfl->cfi_table[0x16] = 0x00;
+    pfl->cfi_table[0x15] = pri_ofs;
+    pfl->cfi_table[0x16] = pri_ofs >> 8;
     /* Alternate command set (none) */
     pfl->cfi_table[0x17] = 0x00;
     pfl->cfi_table[0x18] = 0x00;
     /* Alternate extended table (none) */
     pfl->cfi_table[0x19] = 0x00;
     pfl->cfi_table[0x1A] = 0x00;
+
+    /* CFI: System Interface Information */
+
     /* Vcc min */
     pfl->cfi_table[0x1B] = 0x45;
     /* Vcc max */
@@ -802,6 +806,9 @@ static void pflash_cfi01_realize(DeviceState *dev, Error **errp)
     pfl->cfi_table[0x25] = 0x04;
     /* Max timeout for chip erase */
     pfl->cfi_table[0x26] = 0x00;
+
+    /* CFI: Device Geometry Definition */
+
     /* Device size */
     pfl->cfi_table[0x27] = ctz32(device_len); /* + 1; */
     /* Flash device interface (8 & 16 bits) */
@@ -826,26 +833,30 @@ static void pflash_cfi01_realize(DeviceState *dev, Error **errp)
     pfl->cfi_table[0x2E] = (blocks_per_device - 1) >> 8;
     pfl->cfi_table[0x2F] = sector_len_per_device >> 8;
     pfl->cfi_table[0x30] = sector_len_per_device >> 16;
+    assert(0x30 < pri_ofs);
+
+    /* CFI: Primary-Vendor Specific */
 
     /* Extended */
-    pfl->cfi_table[0x31] = 'P';
-    pfl->cfi_table[0x32] = 'R';
-    pfl->cfi_table[0x33] = 'I';
+    pfl->cfi_table[0x00 + pri_ofs] = 'P';
+    pfl->cfi_table[0x01 + pri_ofs] = 'R';
+    pfl->cfi_table[0x02 + pri_ofs] = 'I';
 
-    pfl->cfi_table[0x34] = '1';
-    pfl->cfi_table[0x35] = '0';
+    pfl->cfi_table[0x03 + pri_ofs] = '1';
+    pfl->cfi_table[0x04 + pri_ofs] = '0';
 
-    pfl->cfi_table[0x36] = 0x00;
-    pfl->cfi_table[0x37] = 0x00;
-    pfl->cfi_table[0x38] = 0x00;
-    pfl->cfi_table[0x39] = 0x00;
+    pfl->cfi_table[0x05 + pri_ofs] = 0x00; /* Optional features */
+    pfl->cfi_table[0x06 + pri_ofs] = 0x00;
+    pfl->cfi_table[0x07 + pri_ofs] = 0x00;
+    pfl->cfi_table[0x08 + pri_ofs] = 0x00;
 
-    pfl->cfi_table[0x3a] = 0x00;
+    pfl->cfi_table[0x09 + pri_ofs] = 0x00; /* Func. supported after suspend */
 
-    pfl->cfi_table[0x3b] = 0x00;
-    pfl->cfi_table[0x3c] = 0x00;
+    pfl->cfi_table[0x0a + pri_ofs] = 0x00; /* Block status register mask */
+    pfl->cfi_table[0x0b + pri_ofs] = 0x00;
 
-    pfl->cfi_table[0x3f] = 0x01; /* Number of protection fields */
+    pfl->cfi_table[0x0e + pri_ofs] = 0x01; /* Number of protection fields */
+    assert(0x0e + pri_ofs < ARRAY_SIZE(pfl->cfi_table));
 }
 
 static void pflash_cfi01_system_reset(DeviceState *dev)
-- 
2.20.1



  parent reply	other threads:[~2019-07-02  3:14 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-02  0:12 [Qemu-devel] [PATCH v2 0/9] hw/block/pflash_cfi01: Add DeviceReset() handler Philippe Mathieu-Daudé
2019-07-02  0:12 ` [Qemu-devel] [PATCH v2 1/9] hw/block/pflash_cfi01: Removed an unused timer Philippe Mathieu-Daudé
2019-07-02 15:58   ` Alistair Francis
2019-07-02  0:12 ` [Qemu-devel] [PATCH v2 2/9] hw/block/pflash_cfi01: Use the correct READ_ARRAY value Philippe Mathieu-Daudé
2019-07-02  2:54   ` John Snow
2019-07-02 15:59   ` Alistair Francis
2019-07-02  0:12 ` [Qemu-devel] [PATCH v2 3/9] hw/block/pflash_cfi01: Extract pflash_mode_read_array() Philippe Mathieu-Daudé
2019-07-02  3:01   ` John Snow
2019-07-02 16:01   ` Alistair Francis
2019-07-02  0:12 ` [Qemu-devel] [PATCH v2 4/9] hw/block/pflash_cfi01: Start state machine as READY to accept commands Philippe Mathieu-Daudé
2019-07-02  3:04   ` John Snow
2019-07-02 16:02   ` Alistair Francis
2019-07-02  0:12 ` [Qemu-devel] [PATCH v2 5/9] hw/block/pflash_cfi01: Add the DeviceReset() handler Philippe Mathieu-Daudé
2019-07-02  3:16   ` John Snow
2019-07-02  9:23     ` Peter Maydell
2019-07-02  9:37       ` Philippe Mathieu-Daudé
2019-07-02 14:32         ` Laszlo Ersek
2019-07-02 12:30       ` John Snow
2019-07-02 12:14     ` Laszlo Ersek
2019-07-02  0:12 ` [Qemu-devel] [PATCH v2 6/9] hw/block/pflash_cfi01: Simplify CFI_QUERY processing Philippe Mathieu-Daudé
2019-07-02 16:03   ` Alistair Francis
2019-07-02  0:12 ` [Qemu-devel] [PATCH v2 7/9] hw/block/pflash_cfi01: Improve command comments Philippe Mathieu-Daudé
2019-07-02 16:13   ` Alistair Francis
2019-07-02  0:13 ` [Qemu-devel] [PATCH v2 8/9] hw/block/pflash_cfi01: Replace DPRINTF by qemu_log_mask(GUEST_ERROR) Philippe Mathieu-Daudé
2019-07-02 16:15   ` Alistair Francis
2019-07-02  0:13 ` Philippe Mathieu-Daudé [this message]
2019-07-02 16:17   ` [Qemu-devel] [PATCH v2 9/9] hw/block/pflash_cfi01: Hold the PRI table offset in a variable Alistair Francis
2019-07-02  6:15 ` [Qemu-devel] [PATCH v2 0/9] hw/block/pflash_cfi01: Add DeviceReset() handler no-reply
2019-07-02 10:17   ` Philippe Mathieu-Daudé
2019-07-02 11:52 ` Laszlo Ersek
2019-07-02 13:41   ` Laszlo Ersek
2019-07-02 21:00     ` Laszlo Ersek
2019-07-02 15:28   ` Philippe Mathieu-Daudé

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190702001301.4768-10-philmd@redhat.com \
    --to=philmd@redhat.com \
    --cc=alex.bennee@linaro.org \
    --cc=alistair23@gmail.com \
    --cc=amarkovic@wavecomp.com \
    --cc=arikalo@wavecomp.com \
    --cc=armbru@redhat.com \
    --cc=aurelien@aurel32.net \
    --cc=david@gibson.dropbear.id.au \
    --cc=edgar.iglesias@gmail.com \
    --cc=ehabkost@redhat.com \
    --cc=jcmvbkbc@gmail.com \
    --cc=jsnow@redhat.com \
    --cc=kraxel@redhat.com \
    --cc=kwolf@redhat.com \
    --cc=lersek@redhat.com \
    --cc=michael@walle.cc \
    --cc=mreitz@redhat.com \
    --cc=mst@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-ppc@nongnu.org \
    --cc=richardw.yang@linux.intel.com \
    --cc=rth@twiddle.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).