From: Max Reitz <mreitz@redhat.com>
To: qemu-block@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>,
qemu-devel@nongnu.org, Max Reitz <mreitz@redhat.com>
Subject: [Qemu-devel] [PATCH 5/7] file-posix: Drop hdev_co_create_opts()
Date: Fri, 12 Jul 2019 19:35:58 +0200 [thread overview]
Message-ID: <20190712173600.14554-6-mreitz@redhat.com> (raw)
In-Reply-To: <20190712173600.14554-1-mreitz@redhat.com>
The generic fallback implementation effectively does the same.
Signed-off-by: Max Reitz <mreitz@redhat.com>
---
block/file-posix.c | 67 ----------------------------------------------
1 file changed, 67 deletions(-)
diff --git a/block/file-posix.c b/block/file-posix.c
index 4479cc7ab4..65bd6d3333 100644
--- a/block/file-posix.c
+++ b/block/file-posix.c
@@ -3325,67 +3325,6 @@ static coroutine_fn int hdev_co_pwrite_zeroes(BlockDriverState *bs,
return raw_do_pwrite_zeroes(bs, offset, bytes, flags, true);
}
-static int coroutine_fn hdev_co_create_opts(const char *filename, QemuOpts *opts,
- Error **errp)
-{
- int fd;
- int ret = 0;
- struct stat stat_buf;
- int64_t total_size = 0;
- bool has_prefix;
-
- /* This function is used by both protocol block drivers and therefore either
- * of these prefixes may be given.
- * The return value has to be stored somewhere, otherwise this is an error
- * due to -Werror=unused-value. */
- has_prefix =
- strstart(filename, "host_device:", &filename) ||
- strstart(filename, "host_cdrom:" , &filename);
-
- (void)has_prefix;
-
- ret = raw_normalize_devicepath(&filename, errp);
- if (ret < 0) {
- return ret;
- }
-
- /* Read out options */
- total_size = ROUND_UP(qemu_opt_get_size_del(opts, BLOCK_OPT_SIZE, 0),
- BDRV_SECTOR_SIZE);
-
- fd = qemu_open(filename, O_WRONLY | O_BINARY);
- if (fd < 0) {
- ret = -errno;
- error_setg_errno(errp, -ret, "Could not open device");
- return ret;
- }
-
- if (fstat(fd, &stat_buf) < 0) {
- ret = -errno;
- error_setg_errno(errp, -ret, "Could not stat device");
- } else if (!S_ISBLK(stat_buf.st_mode) && !S_ISCHR(stat_buf.st_mode)) {
- error_setg(errp,
- "The given file is neither a block nor a character device");
- ret = -ENODEV;
- } else if (lseek(fd, 0, SEEK_END) < total_size) {
- error_setg(errp, "Device is too small");
- ret = -ENOSPC;
- }
-
- if (!ret && total_size) {
- uint8_t buf[BDRV_SECTOR_SIZE] = { 0 };
- int64_t zero_size = MIN(BDRV_SECTOR_SIZE, total_size);
- if (lseek(fd, 0, SEEK_SET) == -1) {
- ret = -errno;
- } else {
- ret = qemu_write_full(fd, buf, zero_size);
- ret = ret == zero_size ? 0 : -errno;
- }
- }
- qemu_close(fd);
- return ret;
-}
-
static BlockDriver bdrv_host_device = {
.format_name = "host_device",
.protocol_name = "host_device",
@@ -3398,8 +3337,6 @@ static BlockDriver bdrv_host_device = {
.bdrv_reopen_prepare = raw_reopen_prepare,
.bdrv_reopen_commit = raw_reopen_commit,
.bdrv_reopen_abort = raw_reopen_abort,
- .bdrv_co_create_opts = hdev_co_create_opts,
- .create_opts = &raw_create_opts,
.mutable_opts = mutable_opts,
.bdrv_co_invalidate_cache = raw_co_invalidate_cache,
.bdrv_co_pwrite_zeroes = hdev_co_pwrite_zeroes,
@@ -3525,8 +3462,6 @@ static BlockDriver bdrv_host_cdrom = {
.bdrv_reopen_prepare = raw_reopen_prepare,
.bdrv_reopen_commit = raw_reopen_commit,
.bdrv_reopen_abort = raw_reopen_abort,
- .bdrv_co_create_opts = hdev_co_create_opts,
- .create_opts = &raw_create_opts,
.mutable_opts = mutable_opts,
.bdrv_co_invalidate_cache = raw_co_invalidate_cache,
@@ -3659,8 +3594,6 @@ static BlockDriver bdrv_host_cdrom = {
.bdrv_reopen_prepare = raw_reopen_prepare,
.bdrv_reopen_commit = raw_reopen_commit,
.bdrv_reopen_abort = raw_reopen_abort,
- .bdrv_co_create_opts = hdev_co_create_opts,
- .create_opts = &raw_create_opts,
.mutable_opts = mutable_opts,
.bdrv_co_preadv = raw_co_preadv,
--
2.21.0
next prev parent reply other threads:[~2019-07-12 17:36 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-12 17:35 [Qemu-devel] [PATCH 0/7] block: Generic file creation fallback Max Reitz
2019-07-12 17:35 ` [Qemu-devel] [PATCH 1/7] block/nbd: Fix hang in .bdrv_close() Max Reitz
2019-07-16 13:08 ` [Qemu-devel] [Qemu-block] " Maxim Levitsky
2019-07-12 17:35 ` [Qemu-devel] [PATCH 2/7] block: Add blk_truncate_for_formatting() Max Reitz
2019-07-16 13:08 ` [Qemu-devel] [Qemu-block] " Maxim Levitsky
2019-07-16 15:45 ` Maxim Levitsky
2019-07-16 16:03 ` Max Reitz
2019-07-12 17:35 ` [Qemu-devel] [PATCH 3/7] block: Use blk_truncate_for_formatting() Max Reitz
2019-07-16 13:08 ` [Qemu-devel] [Qemu-block] " Maxim Levitsky
2019-07-12 17:35 ` [Qemu-devel] [PATCH 4/7] block: Generic file creation fallback Max Reitz
2019-07-16 13:09 ` [Qemu-devel] [Qemu-block] " Maxim Levitsky
2019-07-12 17:35 ` Max Reitz [this message]
2019-07-16 13:09 ` [Qemu-devel] [Qemu-block] [PATCH 5/7] file-posix: Drop hdev_co_create_opts() Maxim Levitsky
2019-07-12 17:35 ` [Qemu-devel] [PATCH 6/7] iscsi: Drop iscsi_co_create_opts() Max Reitz
2019-07-16 13:08 ` [Qemu-devel] [Qemu-block] " Maxim Levitsky
2019-07-12 17:36 ` [Qemu-devel] [PATCH 7/7] iotests: Add test for image creation fallback Max Reitz
2019-07-15 9:31 ` Thomas Huth
2019-07-15 9:48 ` Max Reitz
2019-07-16 14:10 ` Eric Blake
2019-09-05 13:30 ` [Qemu-devel] [Qemu-block] [PATCH 0/7] block: Generic file " Maxim Levitsky
2019-09-10 9:16 ` Max Reitz
2019-09-10 10:40 ` Maxim Levitsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190712173600.14554-6-mreitz@redhat.com \
--to=mreitz@redhat.com \
--cc=kwolf@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).