* [Qemu-devel] [PULL 1/2] hw/block/pflash_cfi02: Explicit switch fallthrough for ERASE commands
2019-07-16 16:01 [Qemu-devel] [PULL 0/2] pflash-next patches for v4.1.0-rc1 Philippe Mathieu-Daudé
@ 2019-07-16 16:01 ` Philippe Mathieu-Daudé
2019-07-16 16:01 ` [Qemu-devel] [PULL 2/2] hw/block/pflash_cfi01: Start state machine as READY to accept commands Philippe Mathieu-Daudé
` (2 subsequent siblings)
3 siblings, 0 replies; 6+ messages in thread
From: Philippe Mathieu-Daudé @ 2019-07-16 16:01 UTC (permalink / raw)
To: qemu-devel
Cc: Kevin Wolf, Peter Maydell, Philippe Mathieu-Daudé,
qemu-block, Max Reitz
Previous to commit ddb6f2254, the DQ2 bit was incorrectly set
during PROGRAM command (0xA0). The commit reordered the switch
cases to only set the DQ2 bit for the ERASE commands using a
fallthrough, but did not explicit the fallthrough is intentional.
Mark the switch fallthrough with a comment interpretable by C
preprocessors and static analysis tools.
Reported-by: Coverity (CID 1403012)
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20190711130759.27720-1-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
hw/block/pflash_cfi02.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/hw/block/pflash_cfi02.c b/hw/block/pflash_cfi02.c
index 83084b9d72..f68837a449 100644
--- a/hw/block/pflash_cfi02.c
+++ b/hw/block/pflash_cfi02.c
@@ -367,6 +367,7 @@ static uint64_t pflash_read(void *opaque, hwaddr offset, unsigned int width)
case 0x30: /* Sector Erase */
/* Toggle bit 2 during erase, but not program. */
toggle_dq2(pfl);
+ /* fall through */
case 0xA0: /* Program */
/* Toggle bit 6 */
toggle_dq6(pfl);
--
2.20.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* [Qemu-devel] [PULL 2/2] hw/block/pflash_cfi01: Start state machine as READY to accept commands
2019-07-16 16:01 [Qemu-devel] [PULL 0/2] pflash-next patches for v4.1.0-rc1 Philippe Mathieu-Daudé
2019-07-16 16:01 ` [Qemu-devel] [PULL 1/2] hw/block/pflash_cfi02: Explicit switch fallthrough for ERASE commands Philippe Mathieu-Daudé
@ 2019-07-16 16:01 ` Philippe Mathieu-Daudé
2019-07-16 16:30 ` [Qemu-devel] [PULL 0/2] pflash-next patches for v4.1.0-rc1 Peter Maydell
2019-07-16 21:32 ` no-reply
3 siblings, 0 replies; 6+ messages in thread
From: Philippe Mathieu-Daudé @ 2019-07-16 16:01 UTC (permalink / raw)
To: qemu-devel
Cc: Kevin Wolf, qemu-block, Philippe Mathieu-Daudé, Laszlo Ersek,
Max Reitz, Alistair Francis, John Snow
When the state machine is ready to accept command, the bit 7 of
the status register (SR) is set to 1.
The guest polls the status register and check this bit before
writting command to the internal 'Write State Machine' (WSM).
Set SR.7 bit to 1 when the device is created.
There is no migration impact by this change.
Reference: Read Array Flowchart
"Common Flash Interface (CFI) and Command Sets"
(Intel Application Note 646)
Appendix B "Basic Command Set"
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190715121338.20600-5-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
hw/block/pflash_cfi01.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/hw/block/pflash_cfi01.c b/hw/block/pflash_cfi01.c
index db4a246b22..435be1e35c 100644
--- a/hw/block/pflash_cfi01.c
+++ b/hw/block/pflash_cfi01.c
@@ -777,7 +777,7 @@ static void pflash_cfi01_realize(DeviceState *dev, Error **errp)
pfl->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, pflash_timer, pfl);
pfl->wcycle = 0;
pfl->cmd = 0;
- pfl->status = 0;
+ pfl->status = 0x80; /* WSM ready */
/* Hardcoded CFI table */
/* Standard "QRY" string */
pfl->cfi_table[0x10] = 'Q';
--
2.20.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [Qemu-devel] [PULL 0/2] pflash-next patches for v4.1.0-rc1
2019-07-16 16:01 [Qemu-devel] [PULL 0/2] pflash-next patches for v4.1.0-rc1 Philippe Mathieu-Daudé
2019-07-16 16:01 ` [Qemu-devel] [PULL 1/2] hw/block/pflash_cfi02: Explicit switch fallthrough for ERASE commands Philippe Mathieu-Daudé
2019-07-16 16:01 ` [Qemu-devel] [PULL 2/2] hw/block/pflash_cfi01: Start state machine as READY to accept commands Philippe Mathieu-Daudé
@ 2019-07-16 16:30 ` Peter Maydell
2019-07-16 21:32 ` no-reply
3 siblings, 0 replies; 6+ messages in thread
From: Peter Maydell @ 2019-07-16 16:30 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Kevin Wolf, QEMU Developers, Qemu-block, Max Reitz
On Tue, 16 Jul 2019 at 17:02, Philippe Mathieu-Daudé <philmd@redhat.com> wrote:
>
> The following changes since commit 697f59243f5a28b8a243ff5ad59e34bbecffcae1:
>
> Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging (2019-07-16 15:08:29 +0100)
>
> are available in the Git repository at:
>
> https://gitlab.com/philmd/qemu.git tags/pflash-next-20190716
>
> for you to fetch changes up to 611c749c3b86fe377c94ea301feab3d9ce3bf617:
>
> hw/block/pflash_cfi01: Start state machine as READY to accept commands (2019-07-16 17:54:06 +0200)
>
> ----------------------------------------------------------------
>
> Trivial pflash fixes for rc1.
>
> ----------------------------------------------------------------
Applied, thanks.
Please update the changelog at https://wiki.qemu.org/ChangeLog/4.1
for any user-visible changes.
-- PMM
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Qemu-devel] [PULL 0/2] pflash-next patches for v4.1.0-rc1
2019-07-16 16:01 [Qemu-devel] [PULL 0/2] pflash-next patches for v4.1.0-rc1 Philippe Mathieu-Daudé
` (2 preceding siblings ...)
2019-07-16 16:30 ` [Qemu-devel] [PULL 0/2] pflash-next patches for v4.1.0-rc1 Peter Maydell
@ 2019-07-16 21:32 ` no-reply
2019-07-16 22:02 ` Philippe Mathieu-Daudé
3 siblings, 1 reply; 6+ messages in thread
From: no-reply @ 2019-07-16 21:32 UTC (permalink / raw)
To: philmd; +Cc: kwolf, philmd, qemu-devel, qemu-block, mreitz
Patchew URL: https://patchew.org/QEMU/20190716160143.394-1-philmd@redhat.com/
Hi,
This series seems to have some coding style problems. See output below for
more information:
Type: series
Subject: [Qemu-devel] [PULL 0/2] pflash-next patches for v4.1.0-rc1
Message-id: 20190716160143.394-1-philmd@redhat.com
=== TEST SCRIPT BEGIN ===
#!/bin/bash
git rev-parse base > /dev/null || exit 0
git config --local diff.renamelimit 0
git config --local diff.renames True
git config --local diff.algorithm histogram
./scripts/checkpatch.pl --mailback base..
=== TEST SCRIPT END ===
Updating 3c8cf5a9c21ff8782164d1def7f44bd888713384
From https://github.com/patchew-project/qemu
* [new tag] patchew/20190716211343.10792-1-pbonzini@redhat.com -> patchew/20190716211343.10792-1-pbonzini@redhat.com
Submodule 'capstone' (https://git.qemu.org/git/capstone.git) registered for path 'capstone'
Submodule 'dtc' (https://git.qemu.org/git/dtc.git) registered for path 'dtc'
Submodule 'roms/QemuMacDrivers' (https://git.qemu.org/git/QemuMacDrivers.git) registered for path 'roms/QemuMacDrivers'
Submodule 'roms/SLOF' (https://git.qemu.org/git/SLOF.git) registered for path 'roms/SLOF'
Submodule 'roms/edk2' (https://git.qemu.org/git/edk2.git) registered for path 'roms/edk2'
Submodule 'roms/ipxe' (https://git.qemu.org/git/ipxe.git) registered for path 'roms/ipxe'
Submodule 'roms/openbios' (https://git.qemu.org/git/openbios.git) registered for path 'roms/openbios'
Submodule 'roms/openhackware' (https://git.qemu.org/git/openhackware.git) registered for path 'roms/openhackware'
Submodule 'roms/qemu-palcode' (https://git.qemu.org/git/qemu-palcode.git) registered for path 'roms/qemu-palcode'
Submodule 'roms/seabios' (https://git.qemu.org/git/seabios.git/) registered for path 'roms/seabios'
Submodule 'roms/seabios-hppa' (https://git.qemu.org/git/seabios-hppa.git) registered for path 'roms/seabios-hppa'
Submodule 'roms/sgabios' (https://git.qemu.org/git/sgabios.git) registered for path 'roms/sgabios'
Submodule 'roms/skiboot' (https://git.qemu.org/git/skiboot.git) registered for path 'roms/skiboot'
Submodule 'roms/u-boot' (https://git.qemu.org/git/u-boot.git) registered for path 'roms/u-boot'
Submodule 'roms/u-boot-sam460ex' (https://git.qemu.org/git/u-boot-sam460ex.git) registered for path 'roms/u-boot-sam460ex'
Submodule 'slirp' (https://git.qemu.org/git/libslirp.git) registered for path 'slirp'
Submodule 'tests/fp/berkeley-softfloat-3' (https://git.qemu.org/git/berkeley-softfloat-3.git) registered for path 'tests/fp/berkeley-softfloat-3'
Submodule 'tests/fp/berkeley-testfloat-3' (https://git.qemu.org/git/berkeley-testfloat-3.git) registered for path 'tests/fp/berkeley-testfloat-3'
Submodule 'ui/keycodemapdb' (https://git.qemu.org/git/keycodemapdb.git) registered for path 'ui/keycodemapdb'
Cloning into 'capstone'...
Submodule path 'capstone': checked out '22ead3e0bfdb87516656453336160e0a37b066bf'
Cloning into 'dtc'...
Submodule path 'dtc': checked out '88f18909db731a627456f26d779445f84e449536'
Cloning into 'roms/QemuMacDrivers'...
Submodule path 'roms/QemuMacDrivers': checked out '90c488d5f4a407342247b9ea869df1c2d9c8e266'
Cloning into 'roms/SLOF'...
Submodule path 'roms/SLOF': checked out 'ba1ab360eebe6338bb8d7d83a9220ccf7e213af3'
Cloning into 'roms/edk2'...
Submodule path 'roms/edk2': checked out '20d2e5a125e34fc8501026613a71549b2a1a3e54'
Submodule 'SoftFloat' (https://github.com/ucb-bar/berkeley-softfloat-3.git) registered for path 'ArmPkg/Library/ArmSoftFloatLib/berkeley-softfloat-3'
Submodule 'CryptoPkg/Library/OpensslLib/openssl' (https://github.com/openssl/openssl) registered for path 'CryptoPkg/Library/OpensslLib/openssl'
Cloning into 'ArmPkg/Library/ArmSoftFloatLib/berkeley-softfloat-3'...
Submodule path 'roms/edk2/ArmPkg/Library/ArmSoftFloatLib/berkeley-softfloat-3': checked out 'b64af41c3276f97f0e181920400ee056b9c88037'
Cloning into 'CryptoPkg/Library/OpensslLib/openssl'...
Submodule path 'roms/edk2/CryptoPkg/Library/OpensslLib/openssl': checked out '50eaac9f3337667259de725451f201e784599687'
Submodule 'boringssl' (https://boringssl.googlesource.com/boringssl) registered for path 'boringssl'
Submodule 'krb5' (https://github.com/krb5/krb5) registered for path 'krb5'
Submodule 'pyca.cryptography' (https://github.com/pyca/cryptography.git) registered for path 'pyca-cryptography'
Cloning into 'boringssl'...
Submodule path 'roms/edk2/CryptoPkg/Library/OpensslLib/openssl/boringssl': checked out '2070f8ad9151dc8f3a73bffaa146b5e6937a583f'
Cloning into 'krb5'...
Submodule path 'roms/edk2/CryptoPkg/Library/OpensslLib/openssl/krb5': checked out 'b9ad6c49505c96a088326b62a52568e3484f2168'
Cloning into 'pyca-cryptography'...
Submodule path 'roms/edk2/CryptoPkg/Library/OpensslLib/openssl/pyca-cryptography': checked out '09403100de2f6f1cdd0d484dcb8e620f1c335c8f'
Cloning into 'roms/ipxe'...
Submodule path 'roms/ipxe': checked out 'de4565cbe76ea9f7913a01f331be3ee901bb6e17'
Cloning into 'roms/openbios'...
Submodule path 'roms/openbios': checked out 'c79e0ecb84f4f1ee3f73f521622e264edd1bf174'
Cloning into 'roms/openhackware'...
Submodule path 'roms/openhackware': checked out 'c559da7c8eec5e45ef1f67978827af6f0b9546f5'
Cloning into 'roms/qemu-palcode'...
Submodule path 'roms/qemu-palcode': checked out 'bf0e13698872450164fa7040da36a95d2d4b326f'
Cloning into 'roms/seabios'...
Submodule path 'roms/seabios': checked out 'a5cab58e9a3fb6e168aba919c5669bea406573b4'
Cloning into 'roms/seabios-hppa'...
Submodule path 'roms/seabios-hppa': checked out '0f4fe84658165e96ce35870fd19fc634e182e77b'
Cloning into 'roms/sgabios'...
Submodule path 'roms/sgabios': checked out 'cbaee52287e5f32373181cff50a00b6c4ac9015a'
Cloning into 'roms/skiboot'...
Submodule path 'roms/skiboot': checked out '261ca8e779e5138869a45f174caa49be6a274501'
Cloning into 'roms/u-boot'...
Submodule path 'roms/u-boot': checked out 'd3689267f92c5956e09cc7d1baa4700141662bff'
Cloning into 'roms/u-boot-sam460ex'...
Submodule path 'roms/u-boot-sam460ex': checked out '60b3916f33e617a815973c5a6df77055b2e3a588'
Cloning into 'slirp'...
Submodule path 'slirp': checked out 'f0da6726207b740f6101028b2992f918477a4b08'
Cloning into 'tests/fp/berkeley-softfloat-3'...
Submodule path 'tests/fp/berkeley-softfloat-3': checked out 'b64af41c3276f97f0e181920400ee056b9c88037'
Cloning into 'tests/fp/berkeley-testfloat-3'...
Submodule path 'tests/fp/berkeley-testfloat-3': checked out '5a59dcec19327396a011a17fd924aed4fec416b3'
Cloning into 'ui/keycodemapdb'...
Submodule path 'ui/keycodemapdb': checked out '6b3d716e2b6472eb7189d3220552280ef3d832ce'
Switched to a new branch 'test'
=== OUTPUT BEGIN ===
checkpatch.pl: no revisions returned for revlist '1'
=== OUTPUT END ===
Test command exited with code: 255
The full log is available at
http://patchew.org/logs/20190716160143.394-1-philmd@redhat.com/testing.checkpatch/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to patchew-devel@redhat.com
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [Qemu-devel] [PULL 0/2] pflash-next patches for v4.1.0-rc1
2019-07-16 21:32 ` no-reply
@ 2019-07-16 22:02 ` Philippe Mathieu-Daudé
0 siblings, 0 replies; 6+ messages in thread
From: Philippe Mathieu-Daudé @ 2019-07-16 22:02 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf, patchew-devel, qemu-block, mreitz
On 7/16/19 11:32 PM, no-reply@patchew.org wrote:
> Patchew URL: https://patchew.org/QEMU/20190716160143.394-1-philmd@redhat.com/
>
> Hi,
>
> This series seems to have some coding style problems. See output below for
> more information:
>
> Type: series
> Subject: [Qemu-devel] [PULL 0/2] pflash-next patches for v4.1.0-rc1
> Message-id: 20190716160143.394-1-philmd@redhat.com
>
> === TEST SCRIPT BEGIN ===
> #!/bin/bash
> git rev-parse base > /dev/null || exit 0
> git config --local diff.renamelimit 0
> git config --local diff.renames True
> git config --local diff.algorithm histogram
> ./scripts/checkpatch.pl --mailback base..
> === TEST SCRIPT END ===
>
> Updating 3c8cf5a9c21ff8782164d1def7f44bd888713384
> From https://github.com/patchew-project/qemu
> * [new tag] patchew/20190716211343.10792-1-pbonzini@redhat.com -> patchew/20190716211343.10792-1-pbonzini@redhat.com
> Submodule 'capstone' (https://git.qemu.org/git/capstone.git) registered for path 'capstone'
> Submodule 'dtc' (https://git.qemu.org/git/dtc.git) registered for path 'dtc'
> Submodule 'roms/QemuMacDrivers' (https://git.qemu.org/git/QemuMacDrivers.git) registered for path 'roms/QemuMacDrivers'
> Submodule 'roms/SLOF' (https://git.qemu.org/git/SLOF.git) registered for path 'roms/SLOF'
> Submodule 'roms/edk2' (https://git.qemu.org/git/edk2.git) registered for path 'roms/edk2'
> Submodule 'roms/ipxe' (https://git.qemu.org/git/ipxe.git) registered for path 'roms/ipxe'
> Submodule 'roms/openbios' (https://git.qemu.org/git/openbios.git) registered for path 'roms/openbios'
> Submodule 'roms/openhackware' (https://git.qemu.org/git/openhackware.git) registered for path 'roms/openhackware'
> Submodule 'roms/qemu-palcode' (https://git.qemu.org/git/qemu-palcode.git) registered for path 'roms/qemu-palcode'
> Submodule 'roms/seabios' (https://git.qemu.org/git/seabios.git/) registered for path 'roms/seabios'
> Submodule 'roms/seabios-hppa' (https://git.qemu.org/git/seabios-hppa.git) registered for path 'roms/seabios-hppa'
> Submodule 'roms/sgabios' (https://git.qemu.org/git/sgabios.git) registered for path 'roms/sgabios'
> Submodule 'roms/skiboot' (https://git.qemu.org/git/skiboot.git) registered for path 'roms/skiboot'
> Submodule 'roms/u-boot' (https://git.qemu.org/git/u-boot.git) registered for path 'roms/u-boot'
> Submodule 'roms/u-boot-sam460ex' (https://git.qemu.org/git/u-boot-sam460ex.git) registered for path 'roms/u-boot-sam460ex'
> Submodule 'slirp' (https://git.qemu.org/git/libslirp.git) registered for path 'slirp'
> Submodule 'tests/fp/berkeley-softfloat-3' (https://git.qemu.org/git/berkeley-softfloat-3.git) registered for path 'tests/fp/berkeley-softfloat-3'
> Submodule 'tests/fp/berkeley-testfloat-3' (https://git.qemu.org/git/berkeley-testfloat-3.git) registered for path 'tests/fp/berkeley-testfloat-3'
> Submodule 'ui/keycodemapdb' (https://git.qemu.org/git/keycodemapdb.git) registered for path 'ui/keycodemapdb'
> Cloning into 'capstone'...
> Submodule path 'capstone': checked out '22ead3e0bfdb87516656453336160e0a37b066bf'
> Cloning into 'dtc'...
> Submodule path 'dtc': checked out '88f18909db731a627456f26d779445f84e449536'
> Cloning into 'roms/QemuMacDrivers'...
> Submodule path 'roms/QemuMacDrivers': checked out '90c488d5f4a407342247b9ea869df1c2d9c8e266'
> Cloning into 'roms/SLOF'...
> Submodule path 'roms/SLOF': checked out 'ba1ab360eebe6338bb8d7d83a9220ccf7e213af3'
> Cloning into 'roms/edk2'...
> Submodule path 'roms/edk2': checked out '20d2e5a125e34fc8501026613a71549b2a1a3e54'
> Submodule 'SoftFloat' (https://github.com/ucb-bar/berkeley-softfloat-3.git) registered for path 'ArmPkg/Library/ArmSoftFloatLib/berkeley-softfloat-3'
> Submodule 'CryptoPkg/Library/OpensslLib/openssl' (https://github.com/openssl/openssl) registered for path 'CryptoPkg/Library/OpensslLib/openssl'
> Cloning into 'ArmPkg/Library/ArmSoftFloatLib/berkeley-softfloat-3'...
> Submodule path 'roms/edk2/ArmPkg/Library/ArmSoftFloatLib/berkeley-softfloat-3': checked out 'b64af41c3276f97f0e181920400ee056b9c88037'
> Cloning into 'CryptoPkg/Library/OpensslLib/openssl'...
> Submodule path 'roms/edk2/CryptoPkg/Library/OpensslLib/openssl': checked out '50eaac9f3337667259de725451f201e784599687'
> Submodule 'boringssl' (https://boringssl.googlesource.com/boringssl) registered for path 'boringssl'
> Submodule 'krb5' (https://github.com/krb5/krb5) registered for path 'krb5'
> Submodule 'pyca.cryptography' (https://github.com/pyca/cryptography.git) registered for path 'pyca-cryptography'
> Cloning into 'boringssl'...
> Submodule path 'roms/edk2/CryptoPkg/Library/OpensslLib/openssl/boringssl': checked out '2070f8ad9151dc8f3a73bffaa146b5e6937a583f'
> Cloning into 'krb5'...
> Submodule path 'roms/edk2/CryptoPkg/Library/OpensslLib/openssl/krb5': checked out 'b9ad6c49505c96a088326b62a52568e3484f2168'
> Cloning into 'pyca-cryptography'...
> Submodule path 'roms/edk2/CryptoPkg/Library/OpensslLib/openssl/pyca-cryptography': checked out '09403100de2f6f1cdd0d484dcb8e620f1c335c8f'
> Cloning into 'roms/ipxe'...
> Submodule path 'roms/ipxe': checked out 'de4565cbe76ea9f7913a01f331be3ee901bb6e17'
> Cloning into 'roms/openbios'...
> Submodule path 'roms/openbios': checked out 'c79e0ecb84f4f1ee3f73f521622e264edd1bf174'
> Cloning into 'roms/openhackware'...
> Submodule path 'roms/openhackware': checked out 'c559da7c8eec5e45ef1f67978827af6f0b9546f5'
> Cloning into 'roms/qemu-palcode'...
> Submodule path 'roms/qemu-palcode': checked out 'bf0e13698872450164fa7040da36a95d2d4b326f'
> Cloning into 'roms/seabios'...
> Submodule path 'roms/seabios': checked out 'a5cab58e9a3fb6e168aba919c5669bea406573b4'
> Cloning into 'roms/seabios-hppa'...
> Submodule path 'roms/seabios-hppa': checked out '0f4fe84658165e96ce35870fd19fc634e182e77b'
> Cloning into 'roms/sgabios'...
> Submodule path 'roms/sgabios': checked out 'cbaee52287e5f32373181cff50a00b6c4ac9015a'
> Cloning into 'roms/skiboot'...
> Submodule path 'roms/skiboot': checked out '261ca8e779e5138869a45f174caa49be6a274501'
> Cloning into 'roms/u-boot'...
> Submodule path 'roms/u-boot': checked out 'd3689267f92c5956e09cc7d1baa4700141662bff'
> Cloning into 'roms/u-boot-sam460ex'...
> Submodule path 'roms/u-boot-sam460ex': checked out '60b3916f33e617a815973c5a6df77055b2e3a588'
> Cloning into 'slirp'...
> Submodule path 'slirp': checked out 'f0da6726207b740f6101028b2992f918477a4b08'
> Cloning into 'tests/fp/berkeley-softfloat-3'...
> Submodule path 'tests/fp/berkeley-softfloat-3': checked out 'b64af41c3276f97f0e181920400ee056b9c88037'
> Cloning into 'tests/fp/berkeley-testfloat-3'...
> Submodule path 'tests/fp/berkeley-testfloat-3': checked out '5a59dcec19327396a011a17fd924aed4fec416b3'
> Cloning into 'ui/keycodemapdb'...
> Submodule path 'ui/keycodemapdb': checked out '6b3d716e2b6472eb7189d3220552280ef3d832ce'
> Switched to a new branch 'test'
>
> === OUTPUT BEGIN ===
> checkpatch.pl: no revisions returned for revlist '1'
No idea what this means...
> === OUTPUT END ===
>
> Test command exited with code: 255
>
>
> The full log is available at
> http://patchew.org/logs/20190716160143.394-1-philmd@redhat.com/testing.checkpatch/?type=message.
^ permalink raw reply [flat|nested] 6+ messages in thread