From: "Alex Bennée" <alex.bennee@linaro.org>
To: qemu-devel@nongnu.org
Cc: "Alex Bennée" <alex.bennee@linaro.org>
Subject: [Qemu-devel] [PATCH v2 00/23] testing/next for 4.1-rc2 (win, travis, iotests)
Date: Wed, 17 Jul 2019 14:43:12 +0100 [thread overview]
Message-ID: <20190717134335.15351-1-alex.bennee@linaro.org> (raw)
Hi,
This is my current queue for testing/next which I shall submit a PR
for on Tuesday in time for rc2. This update adds:
- fixes for Windows builds under docker (+installer)
- build fix for --no-default-devices
- tweak to docker DEBUG behaviour
- run iotests in make check
- use travis_retry to deal with flaky tests
Rather than just disabling flaky tests I've enabled travis_retry on
the check phase. This basically avoids me manually triggering rebuilds
to turn the build green again. I think this is OK because actual
breakages will just fail again and we want the CI status to be a
reliable indicator of something gone wrong rather than being ignored
as probably a flaky test. There is a danger that we might be missing
the introduction of flakiness into the build but I suspect we wouldn't
have picked it up those cases anyway. I think soak/stress tests are
probably best handled by maintainers anyway.
The following patches need review
patch 0017/hw i386 also turn off VMMOUSE is VMPORT is disabl.patch
patch 0018/travis enable travis_retry for check phase.patch
patch 0019/tests docker invoke the DEBUG shell with noprofil.patch
Alex Bennée (7):
tests/docker: add test-misc for building tools & docs
tests/migration-test: don't spam the logs when we fail
tests/dockerfiles: update the win cross builds to stretch
shippable: re-enable the windows cross builds
hw/i386: also turn off VMMOUSE is VMPORT is disabled
travis: enable travis_retry for check phase
tests/docker: invoke the DEBUG shell with --noprofile/--norc
Marc-André Lureau (1):
archive-source: also create a stash for submodules
Philippe Mathieu-Daudé (11):
tests/docker: Install Sphinx in the Ubuntu images
tests/docker: Install Sphinx in the Fedora image
tests/docker: Install Ubuntu images noninteractively
tests/docker: Install Sphinx in the Debian images
tests/docker: Install the NSIS tools in the MinGW capable images
tests/docker: Set the correct cross-PKG_CONFIG_PATH in the MXE images
tests/docker: Install texinfo in the Fedora image
buildsys: The NSIS Windows build requires the documentation installed
buildsys: The NSIS Windows build requires qemu-nsis.bmp installed
tests/docker: Let the test-mingw test generate a NSIS installer
NSIS: Add missing firmware blobs
Thomas Huth (4):
tests/qemu-iotests/check: Allow tests without groups
tests/qemu-iotests/group: Remove some more tests from the "auto" group
tests: Run the iotests during "make check" again
gitlab-ci: Remove qcow2 tests that are handled by "make check" already
.gitlab-ci.yml | 13 +-
.shippable.yml | 9 +-
.travis.yml | 2 +-
Makefile | 3 +-
hw/i386/Kconfig | 4 +-
qemu.nsi | 3 +
scripts/archive-source.sh | 18 +--
tests/Makefile.include | 10 +-
tests/check-block.sh | 44 +++++--
tests/docker/Makefile.include | 6 +-
.../dockerfiles/debian-win32-cross.docker | 10 +-
.../dockerfiles/debian-win64-cross.docker | 10 +-
tests/docker/dockerfiles/debian10.docker | 1 +
...{debian8-mxe.docker => debian9-mxe.docker} | 11 +-
tests/docker/dockerfiles/debian9.docker | 1 +
tests/docker/dockerfiles/fedora.docker | 4 +
tests/docker/dockerfiles/ubuntu.docker | 3 +-
tests/docker/dockerfiles/ubuntu1804.docker | 3 +-
tests/docker/run | 4 +-
tests/docker/test-mingw | 4 +-
tests/docker/test-misc | 22 ++++
tests/migration-test.c | 19 ++-
tests/qemu-iotests-quick.sh | 8 --
tests/qemu-iotests/check | 4 +-
tests/qemu-iotests/group | 120 +++++++++---------
25 files changed, 204 insertions(+), 132 deletions(-)
rename tests/docker/dockerfiles/{debian8-mxe.docker => debian9-mxe.docker} (56%)
create mode 100755 tests/docker/test-misc
delete mode 100755 tests/qemu-iotests-quick.sh
--
2.20.1
next reply other threads:[~2019-07-17 13:44 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-17 13:43 Alex Bennée [this message]
2019-07-17 13:43 ` [Qemu-devel] [PATCH v2 01/23] archive-source: also create a stash for submodules Alex Bennée
2019-07-17 13:43 ` [Qemu-devel] [PATCH v2 02/23] tests/docker: add test-misc for building tools & docs Alex Bennée
2019-07-17 13:43 ` [Qemu-devel] [PATCH v2 03/23] tests/docker: Install Sphinx in the Ubuntu images Alex Bennée
2019-07-17 13:43 ` [Qemu-devel] [PATCH v2 04/23] tests/docker: Install Sphinx in the Fedora image Alex Bennée
2019-07-17 13:43 ` [Qemu-devel] [PATCH v2 05/23] tests/docker: Install Ubuntu images noninteractively Alex Bennée
2019-07-17 13:43 ` [Qemu-devel] [PATCH v2 06/23] tests/migration-test: don't spam the logs when we fail Alex Bennée
2019-07-17 13:43 ` [Qemu-devel] [PATCH v2 07/23] tests/dockerfiles: update the win cross builds to stretch Alex Bennée
2019-07-17 13:43 ` [Qemu-devel] [PATCH v2 08/23] shippable: re-enable the windows cross builds Alex Bennée
2019-07-17 13:43 ` [Qemu-devel] [PATCH v2 09/23] tests/docker: Install Sphinx in the Debian images Alex Bennée
2019-07-17 13:43 ` [Qemu-devel] [PATCH v2 10/23] tests/docker: Install the NSIS tools in the MinGW capable images Alex Bennée
2019-07-17 13:43 ` [Qemu-devel] [PATCH v2 11/23] tests/docker: Set the correct cross-PKG_CONFIG_PATH in the MXE images Alex Bennée
2019-07-17 13:43 ` [Qemu-devel] [PATCH v2 12/23] tests/docker: Install texinfo in the Fedora image Alex Bennée
2019-07-17 13:43 ` [Qemu-devel] [PATCH v2 13/23] buildsys: The NSIS Windows build requires the documentation installed Alex Bennée
2019-07-17 13:43 ` [Qemu-devel] [PATCH v2 14/23] buildsys: The NSIS Windows build requires qemu-nsis.bmp installed Alex Bennée
2019-07-17 13:43 ` [Qemu-devel] [PATCH v2 15/23] tests/docker: Let the test-mingw test generate a NSIS installer Alex Bennée
2019-07-17 13:43 ` [Qemu-devel] [PATCH v2 16/23] NSIS: Add missing firmware blobs Alex Bennée
2019-07-17 14:47 ` Philippe Mathieu-Daudé
2019-07-17 18:23 ` Stefan Weil
2019-07-22 20:06 ` Philippe Mathieu-Daudé
2019-07-23 5:33 ` Stefan Weil
2019-07-17 13:43 ` [Qemu-devel] [PATCH v2 17/23] hw/i386: also turn off VMMOUSE is VMPORT is disabled Alex Bennée
2019-07-17 16:02 ` Thomas Huth
2019-07-22 20:02 ` Philippe Mathieu-Daudé
2019-07-17 13:43 ` [Qemu-devel] [PATCH v2 18/23] travis: enable travis_retry for check phase Alex Bennée
2019-07-22 20:01 ` Philippe Mathieu-Daudé
2019-07-17 13:43 ` [Qemu-devel] [PATCH v2 19/23] tests/docker: invoke the DEBUG shell with --noprofile/--norc Alex Bennée
2019-07-23 7:03 ` Philippe Mathieu-Daudé
2019-07-17 13:43 ` [Qemu-devel] [PATCH v2 20/23] tests/qemu-iotests/check: Allow tests without groups Alex Bennée
2019-07-17 13:43 ` [Qemu-devel] [PATCH v2 21/23] tests/qemu-iotests/group: Remove some more tests from the "auto" group Alex Bennée
2019-07-17 13:43 ` [Qemu-devel] [PATCH v2 22/23] tests: Run the iotests during "make check" again Alex Bennée
2019-07-22 19:53 ` Philippe Mathieu-Daudé
2019-07-23 7:20 ` [Qemu-devel] make vm-build-openbsd (was: Re: [PATCH v2 22/23] tests: Run the iotests during "make check" again) Thomas Huth
2019-07-23 8:58 ` Thomas Huth
2019-08-02 14:28 ` Gerd Hoffmann
2019-08-02 14:44 ` Thomas Huth
2019-07-23 9:30 ` [Qemu-devel] [PATCH v2 22/23] tests: Run the iotests during "make check" again Thomas Huth
2019-07-17 13:43 ` [Qemu-devel] [PATCH v2 23/23] gitlab-ci: Remove qcow2 tests that are handled by "make check" already Alex Bennée
2019-07-22 18:29 ` [Qemu-devel] [PATCH v2 00/23] testing/next for 4.1-rc2 (win, travis, iotests) Alex Bennée
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190717134335.15351-1-alex.bennee@linaro.org \
--to=alex.bennee@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).