From: David Hildenbrand <david@redhat.com> To: qemu-devel@nongnu.org Cc: "Michael S . Tsirkin" <mst@redhat.com>, David Hildenbrand <david@redhat.com>, qemu-stable@nongnu.org, Stefan Hajnoczi <stefanha@redhat.com>, Igor Mammedov <imammedo@redhat.com>, David Gibson <david@gibson.dropbear.id.au> Subject: [Qemu-devel] [PATCH-for-4.1 v3 4/6] virtio-balloon: Better names for offset variables in inflate/deflate code Date: Mon, 22 Jul 2019 15:41:06 +0200 [thread overview] Message-ID: <20190722134108.22151-5-david@redhat.com> (raw) In-Reply-To: <20190722134108.22151-1-david@redhat.com> "host_page_base" is really confusing, let's make this clearer, also rename the other offsets to indicate to which base they apply. offset -> mr_offset ram_offset -> rb_offset host_page_base -> rb_aligned_offset While at it, use QEMU_ALIGN_DOWN() instead of a handcrafted computation and move the computation to the place where it is needed. Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Hildenbrand <david@redhat.com> --- hw/virtio/virtio-balloon.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/hw/virtio/virtio-balloon.c b/hw/virtio/virtio-balloon.c index 04a7e6c772..f206cc8bf7 100644 --- a/hw/virtio/virtio-balloon.c +++ b/hw/virtio/virtio-balloon.c @@ -41,24 +41,23 @@ struct PartiallyBalloonedPage { }; static void balloon_inflate_page(VirtIOBalloon *balloon, - MemoryRegion *mr, hwaddr offset) + MemoryRegion *mr, hwaddr mr_offset) { - void *addr = memory_region_get_ram_ptr(mr) + offset; + void *addr = memory_region_get_ram_ptr(mr) + mr_offset; + ram_addr_t rb_offset, rb_aligned_offset; RAMBlock *rb; size_t rb_page_size; int subpages; - ram_addr_t ram_offset, host_page_base; /* XXX is there a better way to get to the RAMBlock than via a * host address? */ - rb = qemu_ram_block_from_host(addr, false, &ram_offset); + rb = qemu_ram_block_from_host(addr, false, &rb_offset); rb_page_size = qemu_ram_pagesize(rb); - host_page_base = ram_offset & ~(rb_page_size - 1); if (rb_page_size == BALLOON_PAGE_SIZE) { /* Easy case */ - ram_block_discard_range(rb, ram_offset, rb_page_size); + ram_block_discard_range(rb, rb_offset, rb_page_size); /* We ignore errors from ram_block_discard_range(), because it * has already reported them, and failing to discard a balloon * page is not fatal */ @@ -74,11 +73,12 @@ static void balloon_inflate_page(VirtIOBalloon *balloon, warn_report_once( "Balloon used with backing page size > 4kiB, this may not be reliable"); + rb_aligned_offset = QEMU_ALIGN_DOWN(rb_offset, rb_page_size); subpages = rb_page_size / BALLOON_PAGE_SIZE; if (balloon->pbp && (rb != balloon->pbp->rb - || host_page_base != balloon->pbp->base)) { + || rb_aligned_offset != balloon->pbp->base)) { /* We've partially ballooned part of a host page, but now * we're trying to balloon part of a different one. Too hard, * give up on the old partial page */ @@ -91,10 +91,10 @@ static void balloon_inflate_page(VirtIOBalloon *balloon, size_t bitlen = BITS_TO_LONGS(subpages) * sizeof(unsigned long); balloon->pbp = g_malloc0(sizeof(PartiallyBalloonedPage) + bitlen); balloon->pbp->rb = rb; - balloon->pbp->base = host_page_base; + balloon->pbp->base = rb_aligned_offset; } - set_bit((ram_offset - balloon->pbp->base) / BALLOON_PAGE_SIZE, + set_bit((rb_offset - balloon->pbp->base) / BALLOON_PAGE_SIZE, balloon->pbp->bitmap); if (bitmap_full(balloon->pbp->bitmap, subpages)) { @@ -112,18 +112,18 @@ static void balloon_inflate_page(VirtIOBalloon *balloon, } static void balloon_deflate_page(VirtIOBalloon *balloon, - MemoryRegion *mr, hwaddr offset) + MemoryRegion *mr, hwaddr mr_offset) { - void *addr = memory_region_get_ram_ptr(mr) + offset; + void *addr = memory_region_get_ram_ptr(mr) + mr_offset; + ram_addr_t rb_offset; RAMBlock *rb; size_t rb_page_size; - ram_addr_t ram_offset; void *host_addr; int ret; /* XXX is there a better way to get to the RAMBlock than via a * host address? */ - rb = qemu_ram_block_from_host(addr, false, &ram_offset); + rb = qemu_ram_block_from_host(addr, false, &rb_offset); rb_page_size = qemu_ram_pagesize(rb); if (balloon->pbp) { -- 2.21.0
WARNING: multiple messages have this Message-ID (diff)
From: "Michael S. Tsirkin" <mst@redhat.com> To: qemu-devel@nongnu.org Cc: Peter Maydell <peter.maydell@linaro.org>, David Gibson <david@gibson.dropbear.id.au>, David Hildenbrand <david@redhat.com> Subject: [Qemu-devel] [PULL 08/12] virtio-balloon: Better names for offset variables in inflate/deflate code Date: Thu, 25 Jul 2019 11:32:04 -0400 [thread overview] Message-ID: <20190722134108.22151-5-david@redhat.com> (raw) Message-ID: <20190725153204.ZPAi2c2Kpyy4U9MFqw6iChVZwLj2_ME1R1rn5hzho8I@z> (raw) In-Reply-To: <20190725153059.7313-1-mst@redhat.com> From: David Hildenbrand <david@redhat.com> "host_page_base" is really confusing, let's make this clearer, also rename the other offsets to indicate to which base they apply. offset -> mr_offset ram_offset -> rb_offset host_page_base -> rb_aligned_offset While at it, use QEMU_ALIGN_DOWN() instead of a handcrafted computation and move the computation to the place where it is needed. Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20190722134108.22151-5-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> --- hw/virtio/virtio-balloon.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/hw/virtio/virtio-balloon.c b/hw/virtio/virtio-balloon.c index 04a7e6c772..f206cc8bf7 100644 --- a/hw/virtio/virtio-balloon.c +++ b/hw/virtio/virtio-balloon.c @@ -41,24 +41,23 @@ struct PartiallyBalloonedPage { }; static void balloon_inflate_page(VirtIOBalloon *balloon, - MemoryRegion *mr, hwaddr offset) + MemoryRegion *mr, hwaddr mr_offset) { - void *addr = memory_region_get_ram_ptr(mr) + offset; + void *addr = memory_region_get_ram_ptr(mr) + mr_offset; + ram_addr_t rb_offset, rb_aligned_offset; RAMBlock *rb; size_t rb_page_size; int subpages; - ram_addr_t ram_offset, host_page_base; /* XXX is there a better way to get to the RAMBlock than via a * host address? */ - rb = qemu_ram_block_from_host(addr, false, &ram_offset); + rb = qemu_ram_block_from_host(addr, false, &rb_offset); rb_page_size = qemu_ram_pagesize(rb); - host_page_base = ram_offset & ~(rb_page_size - 1); if (rb_page_size == BALLOON_PAGE_SIZE) { /* Easy case */ - ram_block_discard_range(rb, ram_offset, rb_page_size); + ram_block_discard_range(rb, rb_offset, rb_page_size); /* We ignore errors from ram_block_discard_range(), because it * has already reported them, and failing to discard a balloon * page is not fatal */ @@ -74,11 +73,12 @@ static void balloon_inflate_page(VirtIOBalloon *balloon, warn_report_once( "Balloon used with backing page size > 4kiB, this may not be reliable"); + rb_aligned_offset = QEMU_ALIGN_DOWN(rb_offset, rb_page_size); subpages = rb_page_size / BALLOON_PAGE_SIZE; if (balloon->pbp && (rb != balloon->pbp->rb - || host_page_base != balloon->pbp->base)) { + || rb_aligned_offset != balloon->pbp->base)) { /* We've partially ballooned part of a host page, but now * we're trying to balloon part of a different one. Too hard, * give up on the old partial page */ @@ -91,10 +91,10 @@ static void balloon_inflate_page(VirtIOBalloon *balloon, size_t bitlen = BITS_TO_LONGS(subpages) * sizeof(unsigned long); balloon->pbp = g_malloc0(sizeof(PartiallyBalloonedPage) + bitlen); balloon->pbp->rb = rb; - balloon->pbp->base = host_page_base; + balloon->pbp->base = rb_aligned_offset; } - set_bit((ram_offset - balloon->pbp->base) / BALLOON_PAGE_SIZE, + set_bit((rb_offset - balloon->pbp->base) / BALLOON_PAGE_SIZE, balloon->pbp->bitmap); if (bitmap_full(balloon->pbp->bitmap, subpages)) { @@ -112,18 +112,18 @@ static void balloon_inflate_page(VirtIOBalloon *balloon, } static void balloon_deflate_page(VirtIOBalloon *balloon, - MemoryRegion *mr, hwaddr offset) + MemoryRegion *mr, hwaddr mr_offset) { - void *addr = memory_region_get_ram_ptr(mr) + offset; + void *addr = memory_region_get_ram_ptr(mr) + mr_offset; + ram_addr_t rb_offset; RAMBlock *rb; size_t rb_page_size; - ram_addr_t ram_offset; void *host_addr; int ret; /* XXX is there a better way to get to the RAMBlock than via a * host address? */ - rb = qemu_ram_block_from_host(addr, false, &ram_offset); + rb = qemu_ram_block_from_host(addr, false, &rb_offset); rb_page_size = qemu_ram_pagesize(rb); if (balloon->pbp) { -- MST
next prev parent reply other threads:[~2019-07-22 13:42 UTC|newest] Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-07-22 13:41 [Qemu-devel] [PATCH-for-4.1 v3 0/6] virtio-balloon: fixes David Hildenbrand 2019-07-22 13:41 ` [Qemu-devel] [PATCH-for-4.1 v3 1/6] virtio-balloon: Fix wrong sign extension of PFNs David Hildenbrand 2019-07-23 2:27 ` David Gibson 2019-07-25 15:31 ` [Qemu-devel] [PULL 05/12] " Michael S. Tsirkin 2019-07-22 13:41 ` [Qemu-devel] [PATCH-for-4.1 v3 2/6] virtio-balloon: Fix QEMU crashes on pagesize > BALLOON_PAGE_SIZE David Hildenbrand 2019-07-25 15:31 ` [Qemu-devel] [PULL 06/12] " Michael S. Tsirkin 2019-07-22 13:41 ` [Qemu-devel] [PATCH-for-4.1 v3 3/6] virtio-balloon: Simplify deflate with pbp David Hildenbrand 2019-07-25 15:32 ` [Qemu-devel] [PULL 07/12] " Michael S. Tsirkin 2019-07-22 13:41 ` David Hildenbrand [this message] 2019-07-25 15:32 ` [Qemu-devel] [PULL 08/12] virtio-balloon: Better names for offset variables in inflate/deflate code Michael S. Tsirkin 2019-07-22 13:41 ` [Qemu-devel] [PATCH-for-4.1 v3 5/6] virtio-balloon: Rework pbp tracking data David Hildenbrand 2019-07-23 2:54 ` David Gibson 2019-07-23 7:38 ` David Hildenbrand 2019-07-25 15:32 ` [Qemu-devel] [PULL 09/12] " Michael S. Tsirkin 2019-07-22 13:41 ` [Qemu-devel] [PATCH-for-4.1 v3 6/6] virtio-balloon: Use temporary PBP only David Hildenbrand 2019-07-23 3:22 ` David Gibson 2019-07-25 15:32 ` [Qemu-devel] [PULL 10/12] " Michael S. Tsirkin -- strict thread matches above, loose matches on Subject: below -- 2019-07-25 11:36 [Qemu-devel] [PATCH-for-4.1 v4 0/7] virtio-balloon: fixes David Hildenbrand 2019-07-25 11:36 ` [Qemu-devel] [PATCH-for-4.1 v4 1/7] virtio-balloon: Fix wrong sign extension of PFNs David Hildenbrand 2019-07-25 12:36 ` Pankaj Gupta 2019-07-25 11:36 ` [Qemu-devel] [PATCH-for-4.1 v4 2/7] virtio-balloon: Fix QEMU crashes on pagesize > BALLOON_PAGE_SIZE David Hildenbrand 2019-07-25 11:36 ` [Qemu-devel] [PATCH-for-4.1 v4 3/7] virtio-balloon: Simplify deflate with pbp David Hildenbrand 2019-07-25 11:36 ` [Qemu-devel] [PATCH-for-4.1 v4 4/7] virtio-balloon: Better names for offset variables in inflate/deflate code David Hildenbrand 2019-07-25 11:36 ` [Qemu-devel] [PATCH-for-4.1 v4 5/7] virtio-balloon: Rework pbp tracking data David Hildenbrand 2019-07-26 8:08 ` David Gibson 2019-07-25 11:36 ` [Qemu-devel] [PATCH-for-4.1 v4 6/7] virtio-balloon: Use temporary PBP only David Hildenbrand 2019-07-25 11:53 ` Michael S. Tsirkin 2019-07-25 11:56 ` David Hildenbrand 2019-07-25 11:36 ` [Qemu-devel] [PATCH-for-4.1 v4 7/7] virtio-balloon: No need to track subpages for the PBP anymore David Hildenbrand 2019-07-25 15:32 ` [Qemu-devel] [PULL 11/12] virtio-balloon: don't track subpages for the PBP Michael S. Tsirkin 2019-07-26 8:10 ` [Qemu-devel] [PATCH-for-4.1 v4 7/7] virtio-balloon: No need to track subpages for the PBP anymore David Gibson 2019-07-25 15:31 [Qemu-devel] [PULL 00/12] virtio, pc: fixes, cleanups Michael S. Tsirkin 2019-06-02 11:42 ` [Qemu-devel] [PATCH] ioapic: kvm: Skip route updates for masked pins Jan Kiszka 2019-06-02 12:10 ` Peter Xu 2019-06-03 6:30 ` Jan Kiszka 2019-06-03 0:36 ` Michael S. Tsirkin 2019-07-21 8:58 ` Jan Kiszka 2019-07-21 10:04 ` Michael S. Tsirkin 2019-07-21 16:55 ` Paolo Bonzini 2019-07-25 15:31 ` [Qemu-devel] [PULL 03/12] " Michael S. Tsirkin 2019-06-24 9:13 ` [Qemu-devel] [PATCH] docs: clarify multiqueue vs multiple virtqueues Stefan Hajnoczi 2019-06-24 10:19 ` Marc-André Lureau 2019-07-17 10:14 ` Stefan Hajnoczi 2019-07-17 10:35 ` Michael S. Tsirkin 2019-07-25 15:31 ` [Qemu-devel] [PULL 01/12] " Michael S. Tsirkin 2019-07-18 16:14 ` [Qemu-devel] [PATCH v2] i386/acpi: fix gint overflow in crs_range_compare Evgeny Yakovlev 2019-07-18 20:30 ` Michael S. Tsirkin 2019-07-25 15:31 ` [Qemu-devel] [PULL 02/12] " Michael S. Tsirkin 2019-07-19 8:54 ` [Qemu-devel] [PATCH] i386/acpi: show PCI Express bus on pxb-pcie expanders Evgeny Yakovlev 2019-07-19 12:14 ` Igor Mammedov 2019-07-25 15:31 ` [Qemu-devel] [PULL 04/12] " Michael S. Tsirkin 2019-07-25 15:32 ` [Qemu-devel] [PULL 12/12] virtio-balloon: free pbp more aggressively Michael S. Tsirkin 2019-07-26 9:53 ` [Qemu-devel] [PULL 00/12] virtio, pc: fixes, cleanups Peter Maydell
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190722134108.22151-5-david@redhat.com \ --to=david@redhat.com \ --cc=david@gibson.dropbear.id.au \ --cc=imammedo@redhat.com \ --cc=mst@redhat.com \ --cc=qemu-devel@nongnu.org \ --cc=qemu-stable@nongnu.org \ --cc=stefanha@redhat.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).