From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, qemu-arm@nongnu.org, alex.bennee@linaro.org
Subject: [Qemu-devel] [PATCH v2 11/32] target/arm: Add the hypervisor virtual counter
Date: Wed, 31 Jul 2019 13:37:52 -0700 [thread overview]
Message-ID: <20190731203813.30765-12-richard.henderson@linaro.org> (raw)
In-Reply-To: <20190731203813.30765-1-richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
target/arm/cpu-qom.h | 1 +
target/arm/cpu.h | 11 +++++----
target/arm/cpu.c | 2 ++
target/arm/helper.c | 57 ++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 66 insertions(+), 5 deletions(-)
diff --git a/target/arm/cpu-qom.h b/target/arm/cpu-qom.h
index 2049fa9612..43fc8296db 100644
--- a/target/arm/cpu-qom.h
+++ b/target/arm/cpu-qom.h
@@ -76,6 +76,7 @@ void arm_gt_ptimer_cb(void *opaque);
void arm_gt_vtimer_cb(void *opaque);
void arm_gt_htimer_cb(void *opaque);
void arm_gt_stimer_cb(void *opaque);
+void arm_gt_hvtimer_cb(void *opaque);
#define ARM_AFF0_SHIFT 0
#define ARM_AFF0_MASK (0xFFULL << ARM_AFF0_SHIFT)
diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index e37008a4f7..bba4e1f984 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -144,11 +144,12 @@ typedef struct ARMGenericTimer {
uint64_t ctl; /* Timer Control register */
} ARMGenericTimer;
-#define GTIMER_PHYS 0
-#define GTIMER_VIRT 1
-#define GTIMER_HYP 2
-#define GTIMER_SEC 3
-#define NUM_GTIMERS 4
+#define GTIMER_PHYS 0
+#define GTIMER_VIRT 1
+#define GTIMER_HYP 2
+#define GTIMER_SEC 3
+#define GTIMER_HYPVIRT 4
+#define NUM_GTIMERS 5
typedef struct {
uint64_t raw_tcr;
diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index 9eb40ff755..e10b510c0b 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -1218,6 +1218,8 @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp)
arm_gt_htimer_cb, cpu);
cpu->gt_timer[GTIMER_SEC] = timer_new(QEMU_CLOCK_VIRTUAL, GTIMER_SCALE,
arm_gt_stimer_cb, cpu);
+ cpu->gt_timer[GTIMER_HYPVIRT] = timer_new(QEMU_CLOCK_VIRTUAL, GTIMER_SCALE,
+ arm_gt_hvtimer_cb, cpu);
#endif
cpu_exec_realizefn(cs, &local_err);
diff --git a/target/arm/helper.c b/target/arm/helper.c
index e2fcb03da5..e0f5627218 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -2527,6 +2527,7 @@ static uint64_t gt_tval_read(CPUARMState *env, const ARMCPRegInfo *ri,
switch (timeridx) {
case GTIMER_VIRT:
+ case GTIMER_HYPVIRT:
offset = gt_virt_cnt_offset(env);
break;
}
@@ -2543,6 +2544,7 @@ static void gt_tval_write(CPUARMState *env, const ARMCPRegInfo *ri,
switch (timeridx) {
case GTIMER_VIRT:
+ case GTIMER_HYPVIRT:
offset = gt_virt_cnt_offset(env);
break;
}
@@ -2698,6 +2700,34 @@ static void gt_sec_ctl_write(CPUARMState *env, const ARMCPRegInfo *ri,
gt_ctl_write(env, ri, GTIMER_SEC, value);
}
+static void gt_hv_timer_reset(CPUARMState *env, const ARMCPRegInfo *ri)
+{
+ gt_timer_reset(env, ri, GTIMER_HYPVIRT);
+}
+
+static void gt_hv_cval_write(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value)
+{
+ gt_cval_write(env, ri, GTIMER_HYPVIRT, value);
+}
+
+static uint64_t gt_hv_tval_read(CPUARMState *env, const ARMCPRegInfo *ri)
+{
+ return gt_tval_read(env, ri, GTIMER_HYPVIRT);
+}
+
+static void gt_hv_tval_write(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value)
+{
+ gt_tval_write(env, ri, GTIMER_HYPVIRT, value);
+}
+
+static void gt_hv_ctl_write(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value)
+{
+ gt_ctl_write(env, ri, GTIMER_HYPVIRT, value);
+}
+
void arm_gt_ptimer_cb(void *opaque)
{
ARMCPU *cpu = opaque;
@@ -2726,6 +2756,13 @@ void arm_gt_stimer_cb(void *opaque)
gt_recalc_timer(cpu, GTIMER_SEC);
}
+void arm_gt_hvtimer_cb(void *opaque)
+{
+ ARMCPU *cpu = opaque;
+
+ gt_recalc_timer(cpu, GTIMER_HYPVIRT);
+}
+
static const ARMCPRegInfo generic_timer_cp_reginfo[] = {
/* Note that CNTFRQ is purely reads-as-written for the benefit
* of software; writing it doesn't actually change the timer frequency.
@@ -6849,6 +6886,26 @@ void register_cp_regs_for_features(ARMCPU *cpu)
.opc0 = 3, .opc1 = 4, .crn = 2, .crm = 0, .opc2 = 1,
.access = PL2_RW, .writefn = vmsa_tcr_ttbr_el2_write,
.fieldoffset = offsetof(CPUARMState, cp15.ttbr1_el[2]) },
+#ifndef CONFIG_USER_ONLY
+ { .name = "CNTHV_CVAL_EL2", .state = ARM_CP_STATE_AA64,
+ .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 3, .opc2 = 2,
+ .fieldoffset =
+ offsetof(CPUARMState, cp15.c14_timer[GTIMER_HYPVIRT].cval),
+ .type = ARM_CP_IO, .access = PL2_RW,
+ .writefn = gt_hv_cval_write, .raw_writefn = raw_write },
+ { .name = "CNTHV_TVAL_EL2", .state = ARM_CP_STATE_BOTH,
+ .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 3, .opc2 = 0,
+ .type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL2_RW,
+ .resetfn = gt_hv_timer_reset,
+ .readfn = gt_hv_tval_read, .writefn = gt_hv_tval_write },
+ { .name = "CNTHV_CTL_EL2", .state = ARM_CP_STATE_BOTH,
+ .type = ARM_CP_IO,
+ .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 3, .opc2 = 1,
+ .access = PL2_RW,
+ .fieldoffset =
+ offsetof(CPUARMState, cp15.c14_timer[GTIMER_HYPVIRT].ctl),
+ .writefn = gt_hv_ctl_write, .raw_writefn = raw_write },
+#endif
REGINFO_SENTINEL
};
define_arm_cp_regs(cpu, vhe_reginfo);
--
2.17.1
next prev parent reply other threads:[~2019-07-31 20:43 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-31 20:37 [Qemu-devel] [PATCH v2 00/32] target/arm: Implement ARMv8.1-VHE Richard Henderson
2019-07-31 20:37 ` [Qemu-devel] [PATCH v2 01/32] cputlb: Add tlb_set_asid_for_mmuidx Richard Henderson
2019-07-31 20:37 ` [Qemu-devel] [PATCH v2 02/32] cputlb: Add tlb_flush_asid_by_mmuidx and friends Richard Henderson
2019-07-31 20:37 ` [Qemu-devel] [PATCH v2 03/32] target/arm: Install ASIDs for long-form from EL1 Richard Henderson
2019-07-31 20:37 ` [Qemu-devel] [PATCH v2 04/32] target/arm: Install ASIDs for short-form " Richard Henderson
2019-07-31 20:37 ` [Qemu-devel] [PATCH v2 05/32] target/arm: Install ASIDs for EL2 Richard Henderson
2019-07-31 20:37 ` [Qemu-devel] [PATCH v2 06/32] target/arm: Define isar_feature_aa64_vh Richard Henderson
2019-07-31 20:37 ` [Qemu-devel] [PATCH v2 07/32] target/arm: Enable HCR_E2H for VHE Richard Henderson
2019-07-31 20:37 ` [Qemu-devel] [PATCH v2 08/32] target/arm: Add CONTEXTIDR_EL2 Richard Henderson
2019-07-31 20:37 ` [Qemu-devel] [PATCH v2 09/32] target/arm: Add TTBR1_EL2 Richard Henderson
2019-07-31 20:37 ` [Qemu-devel] [PATCH v2 10/32] target/arm: Update CNTVCT_EL0 for VHE Richard Henderson
2019-07-31 20:37 ` Richard Henderson [this message]
2019-07-31 20:37 ` [Qemu-devel] [PATCH v2 12/32] target/arm: Add VHE system register redirection and aliasing Richard Henderson
2019-07-31 20:37 ` [Qemu-devel] [PATCH v2 13/32] target/arm: Split out vae1_tlbmask, vmalle1_tlbmask Richard Henderson
2019-07-31 20:37 ` [Qemu-devel] [PATCH v2 14/32] target/arm: Simplify tlb_force_broadcast alternatives Richard Henderson
2019-07-31 20:37 ` [Qemu-devel] [PATCH v2 15/32] target/arm: Rename ARMMMUIdx*_S12NSE* to ARMMMUIdx*_E10_* Richard Henderson
2019-07-31 20:37 ` [Qemu-devel] [PATCH v2 16/32] target/arm: Rename ARMMMUIdx_S2NS to ARMMMUIdx_Stage2 Richard Henderson
2019-07-31 20:37 ` [Qemu-devel] [PATCH v2 17/32] target/arm: Rename ARMMMUIdx_S1NSE* to ARMMMUIdx_Stage1_E* Richard Henderson
2019-07-31 20:37 ` [Qemu-devel] [PATCH v2 18/32] target/arm: Rename ARMMMUIdx_S1SE* to ARMMMUIdx_SE* Richard Henderson
2019-07-31 20:38 ` [Qemu-devel] [PATCH v2 19/32] target/arm: Rename ARMMMUIdx*_S1E3 to ARMMMUIdx*_SE3 Richard Henderson
2019-07-31 20:38 ` [Qemu-devel] [PATCH v2 20/32] target/arm: Rename ARMMMUIdx_S1E2 to ARMMMUIdx_E2 Richard Henderson
2019-07-31 20:38 ` [Qemu-devel] [PATCH v2 21/32] target/arm: Reorganize ARMMMUIdx Richard Henderson
2019-07-31 20:38 ` [Qemu-devel] [PATCH v2 22/32] target/arm: Add regime_has_2_ranges Richard Henderson
2019-07-31 20:38 ` [Qemu-devel] [PATCH v2 23/32] target/arm: Update arm_mmu_idx for VHE Richard Henderson
2019-07-31 20:38 ` [Qemu-devel] [PATCH v2 24/32] target/arm: Update arm_sctlr " Richard Henderson
2019-07-31 20:38 ` [Qemu-devel] [PATCH v2 25/32] target/arm: Install asids for E2&0 translation regime Richard Henderson
2019-07-31 20:38 ` [Qemu-devel] [PATCH v2 26/32] target/arm: Flush tlbs " Richard Henderson
2019-07-31 20:38 ` [Qemu-devel] [PATCH v2 27/32] target/arm: Update arm_phys_excp_target_el for TGE Richard Henderson
2019-07-31 20:38 ` [Qemu-devel] [PATCH v2 28/32] target/arm: Update regime_is_user for EL2&0 Richard Henderson
2019-07-31 20:38 ` [Qemu-devel] [PATCH v2 29/32] target/arm: Update {fp, sve}_exception_el for VHE Richard Henderson
2019-07-31 20:38 ` [Qemu-devel] [PATCH v2 30/32] target/arm: Enable ARMv8.1-VHE in -cpu max Richard Henderson
2019-07-31 20:38 ` [Qemu-devel] [PATCH v2 31/32] target/arm: check TGE and E2H flags for EL0 pauth traps Richard Henderson
2019-07-31 20:38 ` [Qemu-devel] [PATCH v2 32/32] target/arm: generate a custom MIDR for -cpu max Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190731203813.30765-12-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=alex.bennee@linaro.org \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).