From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, qemu-arm@nongnu.org, alex.bennee@linaro.org
Subject: [Qemu-devel] [PATCH v3 12/34] target/arm: Add VHE system register redirection and aliasing
Date: Sat, 3 Aug 2019 11:47:38 -0700 [thread overview]
Message-ID: <20190803184800.8221-13-richard.henderson@linaro.org> (raw)
In-Reply-To: <20190803184800.8221-1-richard.henderson@linaro.org>
Several of the EL1/0 registers are redirected to the EL2 version when in
EL2 and HCR_EL2.E2H is set. Many of these registers have side effects.
Link together the two ARMCPRegInfo structures after they have been
properly instantiated. Install common dispatch routines to all of the
relevant registers.
The same set of registers that are redirected also have additional
EL12/EL02 aliases created to access the original register that was
redirected.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
target/arm/cpu.h | 44 +++++++----
target/arm/helper.c | 175 ++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 206 insertions(+), 13 deletions(-)
diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index bba4e1f984..a0f10b60eb 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -2455,19 +2455,6 @@ struct ARMCPRegInfo {
*/
ptrdiff_t fieldoffset; /* offsetof(CPUARMState, field) */
- /* Offsets of the secure and non-secure fields in CPUARMState for the
- * register if it is banked. These fields are only used during the static
- * registration of a register. During hashing the bank associated
- * with a given security state is copied to fieldoffset which is used from
- * there on out.
- *
- * It is expected that register definitions use either fieldoffset or
- * bank_fieldoffsets in the definition but not both. It is also expected
- * that both bank offsets are set when defining a banked register. This
- * use indicates that a register is banked.
- */
- ptrdiff_t bank_fieldoffsets[2];
-
/* Function for making any access checks for this register in addition to
* those specified by the 'access' permissions bits. If NULL, no extra
* checks required. The access check is performed at runtime, not at
@@ -2502,6 +2489,37 @@ struct ARMCPRegInfo {
* fieldoffset is 0 then no reset will be done.
*/
CPResetFn *resetfn;
+
+ union {
+ /*
+ * Offsets of the secure and non-secure fields in CPUARMState for
+ * the register if it is banked. These fields are only used during
+ * the static registration of a register. During hashing the bank
+ * associated with a given security state is copied to fieldoffset
+ * which is used from there on out.
+ *
+ * It is expected that register definitions use either fieldoffset
+ * or bank_fieldoffsets in the definition but not both. It is also
+ * expected that both bank offsets are set when defining a banked
+ * register. This use indicates that a register is banked.
+ */
+ ptrdiff_t bank_fieldoffsets[2];
+
+ /*
+ * "Original" writefn and readfn.
+ * For ARMv8.1-VHE register aliases, we overwrite the read/write
+ * accessor functions of various EL1/EL0 to perform the runtime
+ * check for which sysreg should actually be modified, and then
+ * forwards the operation. Before overwriting the accessors,
+ * the original function is copied here, so that accesses that
+ * really do go to the EL1/EL0 version proceed normally.
+ * (The corresponding EL2 register is linked via opaque.)
+ */
+ struct {
+ CPReadFn *orig_readfn;
+ CPWriteFn *orig_writefn;
+ };
+ };
};
/* Macros which are lvalues for the field in CPUARMState for the
diff --git a/target/arm/helper.c b/target/arm/helper.c
index e0f5627218..e9f4cae5e8 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -5225,6 +5225,171 @@ static const ARMCPRegInfo el3_cp_reginfo[] = {
REGINFO_SENTINEL
};
+#ifndef CONFIG_USER_ONLY
+/* Test if system register redirection is to occur in the current state. */
+static bool redirect_for_e2h(CPUARMState *env)
+{
+ return arm_current_el(env) == 2 && (arm_hcr_el2_eff(env) & HCR_E2H);
+}
+
+static uint64_t el2_e2h_read(CPUARMState *env, const ARMCPRegInfo *ri)
+{
+ CPReadFn *readfn;
+
+ if (redirect_for_e2h(env)) {
+ /* Switch to the saved EL2 version of the register. */
+ ri = ri->opaque;
+ readfn = ri->readfn;
+ } else {
+ readfn = ri->orig_readfn;
+ }
+ if (readfn == NULL) {
+ readfn = raw_read;
+ }
+ return readfn(env, ri);
+}
+
+static void el2_e2h_write(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value)
+{
+ CPWriteFn *writefn;
+
+ if (redirect_for_e2h(env)) {
+ /* Switch to the saved EL2 version of the register. */
+ ri = ri->opaque;
+ writefn = ri->writefn;
+ } else {
+ writefn = ri->orig_writefn;
+ }
+ if (writefn == NULL) {
+ writefn = raw_write;
+ }
+ writefn(env, ri, value);
+}
+
+static void define_arm_vh_e2h_redirects_aliases(ARMCPU *cpu)
+{
+ struct E2HAlias {
+ uint32_t src_key, dst_key, new_key;
+ const char *src_name, *dst_name, *new_name;
+ bool (*feature)(const ARMISARegisters *id);
+ };
+
+#define K(op0, op1, crn, crm, op2) \
+ ENCODE_AA64_CP_REG(CP_REG_ARM64_SYSREG_CP, crn, crm, op0, op1, op2)
+
+ static const struct E2HAlias aliases[] = {
+ { K(3, 0, 1, 0, 0), K(3, 4, 1, 0, 0), K(3, 5, 1, 0, 0),
+ "SCTLR", "SCTLR_EL2", "SCTLR_EL12" },
+ { K(3, 0, 1, 0, 2), K(3, 4, 1, 1, 2), K(3, 5, 1, 0, 2),
+ "CPACR", "CPTR_EL2", "CPACR_EL12" },
+ { K(3, 0, 2, 0, 0), K(3, 4, 2, 0, 0), K(3, 5, 2, 0, 0),
+ "TTBR0_EL1", "TTBR0_EL2", "TTBR0_EL12" },
+ { K(3, 0, 2, 0, 1), K(3, 4, 2, 0, 1), K(3, 5, 2, 0, 1),
+ "TTBR1_EL1", "TTBR1_EL2", "TTBR1_EL12" },
+ { K(3, 0, 2, 0, 2), K(3, 4, 2, 0, 2), K(3, 5, 2, 0, 2),
+ "TCR_EL1", "TCR_EL2", "TCR_EL12" },
+ { K(3, 0, 4, 0, 0), K(3, 4, 4, 0, 0), K(3, 5, 4, 0, 0),
+ "SPSR_EL1", "SPSR_EL2", "SPSR_EL12" },
+ { K(3, 0, 4, 0, 1), K(3, 4, 4, 0, 1), K(3, 5, 4, 0, 1),
+ "ELR_EL1", "ELR_EL2", "ELR_EL12" },
+ { K(3, 0, 5, 1, 0), K(3, 4, 5, 1, 0), K(3, 5, 5, 1, 0),
+ "AFSR0_EL1", "AFSR0_EL2", "AFSR0_EL12" },
+ { K(3, 0, 5, 1, 1), K(3, 4, 5, 1, 1), K(3, 5, 5, 1, 1),
+ "AFSR1_EL1", "AFSR1_EL2", "AFSR1_EL12" },
+ { K(3, 0, 5, 2, 0), K(3, 4, 5, 2, 0), K(3, 5, 5, 2, 0),
+ "ESR_EL1", "ESR_EL2", "ESR_EL12" },
+ { K(3, 0, 6, 0, 0), K(3, 4, 6, 0, 0), K(3, 5, 6, 0, 0),
+ "FAR_EL1", "FAR_EL2", "FAR_EL12" },
+ { K(3, 0, 10, 2, 0), K(3, 4, 10, 2, 0), K(3, 5, 10, 2, 0),
+ "MAIR_EL1", "MAIR_EL2", "MAIR_EL12" },
+ { K(3, 0, 10, 3, 0), K(3, 4, 10, 3, 0), K(3, 5, 10, 3, 0),
+ "AMAIR0", "AMAIR_EL2", "AMAIR_EL12" },
+ { K(3, 0, 12, 0, 0), K(3, 4, 12, 0, 0), K(3, 5, 12, 0, 0),
+ "VBAR", "VBAR_EL2", "VBAR_EL12" },
+ { K(3, 0, 13, 0, 1), K(3, 4, 13, 0, 1), K(3, 5, 13, 0, 1),
+ "CONTEXTIDR_EL1", "CONTEXTIDR_EL2", "CONTEXTIDR_EL12" },
+ { K(3, 0, 14, 1, 0), K(3, 4, 14, 1, 0), K(3, 5, 14, 1, 0),
+ "CNTKCTL", "CNTHCTL_EL2", "CNTKCTL_EL12" },
+ { K(3, 3, 14, 2, 0), K(3, 4, 14, 2, 0), K(3, 5, 14, 2, 0),
+ "CNTP_TVAL_EL0", "CNTHP_TVAL_EL2", "CNTP_TVAL_EL02" },
+ { K(3, 3, 14, 2, 1), K(3, 4, 14, 2, 1), K(3, 5, 14, 2, 1),
+ "CNTP_CTL_EL0", "CNTHP_CTL_EL2", "CNTP_CTL_EL02" },
+ { K(3, 3, 14, 2, 2), K(3, 4, 14, 2, 2), K(3, 5, 14, 2, 2),
+ "CNTP_CVAL_EL0", "CNTHP_CVAL_EL2", "CNTP_CVAL_EL02" },
+ { K(3, 3, 14, 3, 0), K(3, 4, 14, 3, 0), K(3, 5, 14, 3, 0),
+ "CNTV_TVAL_EL0", "CNTHV_TVAL_EL2", "CNTV_TVAL_EL02" },
+ { K(3, 3, 14, 3, 1), K(3, 4, 14, 3, 1), K(3, 5, 14, 3, 1),
+ "CNTV_CTL_EL0", "CNTHV_CTL_EL2", "CNTV_CTL_EL02" },
+ { K(3, 3, 14, 3, 2), K(3, 4, 14, 3, 2), K(3, 5, 14, 3, 2),
+ "CNTV_CVAL_EL0", "CNTHV_CVAL_EL2", "CNTV_CVAL_EL02" },
+ /*
+ * CNTHV_CVAL is a special case because there is no separate
+ * AArch32 EL2 register to which CNTV_CVAL may be directed.
+ * The effect can be achieved via CNTHV_CVAL_EL2.
+ */
+ { ENCODE_CP_REG(15, 1, 1, 0, 14, 3, 0), K(3, 4, 14, 3, 2), 0,
+ "CNTV_CVAL", "CNTHV_CVAL_EL2", NULL },
+
+ /*
+ * Note that redirection of ZCR is mentioned in the description
+ * of ZCR_EL2, and aliasing in the description of ZCR_EL1, but
+ * not in the summary table.
+ */
+ { K(3, 0, 1, 2, 0), K(3, 4, 1, 2, 0), K(3, 5, 1, 2, 0),
+ "ZCR_EL1", "ZCR_EL2", "ZCR_EL12", isar_feature_aa64_sve },
+
+ /* TODO: ARMv8.2-SPE -- PMSCR_EL2 */
+ /* TODO: ARMv8.4-Trace -- TRFCR_EL2 */
+ };
+#undef K
+
+ size_t i;
+
+ for (i = 0; i < ARRAY_SIZE(aliases); i++) {
+ const struct E2HAlias *a = &aliases[i];
+ ARMCPRegInfo *src_reg, *dst_reg;
+
+ if (a->feature && !a->feature(&cpu->isar)) {
+ continue;
+ }
+
+ src_reg = g_hash_table_lookup(cpu->cp_regs, &a->src_key);
+ dst_reg = g_hash_table_lookup(cpu->cp_regs, &a->dst_key);
+ g_assert(src_reg != NULL);
+ g_assert(dst_reg != NULL);
+
+ /* Cross-compare names to detect typos in the keys. */
+ g_assert(strcmp(src_reg->name, a->src_name) == 0);
+ g_assert(strcmp(dst_reg->name, a->dst_name) == 0);
+
+ /* None of the core system registers use opaque; we will. */
+ g_assert(src_reg->opaque == NULL);
+
+ /* Create alias before redirection so we dup the right data. */
+ if (a->new_key) {
+ ARMCPRegInfo *new_reg = g_memdup(src_reg, sizeof(ARMCPRegInfo));
+ uint32_t *new_key = g_memdup(&a->new_key, sizeof(uint32_t));
+ bool ok;
+
+ new_reg->name = a->new_name;
+ new_reg->type |= ARM_CP_ALIAS;
+ /* Remove PL1/PL0 access, leaving PL2/PL3 R/W in place. */
+ new_reg->access &= 0xf0;
+
+ ok = g_hash_table_insert(cpu->cp_regs, new_key, new_reg);
+ g_assert(ok);
+ }
+
+ src_reg->opaque = dst_reg;
+ src_reg->orig_readfn = src_reg->readfn;
+ src_reg->orig_writefn = src_reg->writefn;
+ src_reg->readfn = el2_e2h_read;
+ src_reg->writefn = el2_e2h_write;
+ }
+}
+#endif
+
static CPAccessResult ctr_el0_access(CPUARMState *env, const ARMCPRegInfo *ri,
bool isread)
{
@@ -6942,6 +7107,16 @@ void register_cp_regs_for_features(ARMCPU *cpu)
: cpu_isar_feature(aa32_predinv, cpu)) {
define_arm_cp_regs(cpu, predinv_reginfo);
}
+
+#ifndef CONFIG_USER_ONLY
+ /*
+ * Register redirections and aliases must be done last,
+ * after the registers from the other extensions have been defined.
+ */
+ if (arm_feature(env, ARM_FEATURE_EL2) && cpu_isar_feature(aa64_vh, cpu)) {
+ define_arm_vh_e2h_redirects_aliases(cpu);
+ }
+#endif
}
void arm_cpu_register_gdb_regs_for_features(ARMCPU *cpu)
--
2.17.1
next prev parent reply other threads:[~2019-08-03 18:55 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-03 18:47 [Qemu-devel] [PATCH v3 00/34] target/arm: Implement ARMv8.1-VHE Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 01/34] cputlb: Add tlb_set_asid_for_mmuidx Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 02/34] cputlb: Add tlb_flush_asid_by_mmuidx and friends Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 03/34] target/arm: Install ASIDs for long-form from EL1 Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 04/34] target/arm: Install ASIDs for short-form " Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 05/34] target/arm: Install ASIDs for EL2 Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 06/34] target/arm: Define isar_feature_aa64_vh Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 07/34] target/arm: Enable HCR_E2H for VHE Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 08/34] target/arm: Add CONTEXTIDR_EL2 Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 09/34] target/arm: Add TTBR1_EL2 Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 10/34] target/arm: Update CNTVCT_EL0 for VHE Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 11/34] target/arm: Add the hypervisor virtual counter Richard Henderson
2019-08-03 18:47 ` Richard Henderson [this message]
2019-08-05 11:25 ` [Qemu-devel] [PATCH v3 12/34] target/arm: Add VHE system register redirection and aliasing Alex Bennée
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 13/34] target/arm: Split out vae1_tlbmask, vmalle1_tlbmask Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 14/34] target/arm: Simplify tlb_force_broadcast alternatives Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 15/34] target/arm: Rename ARMMMUIdx*_S12NSE* to ARMMMUIdx*_E10_* Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 16/34] target/arm: Rename ARMMMUIdx_S2NS to ARMMMUIdx_Stage2 Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 17/34] target/arm: Rename ARMMMUIdx_S1NSE* to ARMMMUIdx_Stage1_E* Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 18/34] target/arm: Rename ARMMMUIdx_S1SE* to ARMMMUIdx_SE* Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 19/34] target/arm: Rename ARMMMUIdx*_S1E3 to ARMMMUIdx*_SE3 Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 20/34] target/arm: Rename ARMMMUIdx_S1E2 to ARMMMUIdx_E2 Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 21/34] target/arm: Reorganize ARMMMUIdx Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 22/34] target/arm: Add regime_has_2_ranges Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 23/34] target/arm: Update arm_mmu_idx for VHE Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 24/34] target/arm: Update arm_sctlr " Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 25/34] target/arm: Update aa64_zva_access for EL2 Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 26/34] target/arm: Update ctr_el0_access " Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 27/34] target/arm: Install asids for E2&0 translation regime Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 28/34] target/arm: Flush tlbs " Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 29/34] target/arm: Update arm_phys_excp_target_el for TGE Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 30/34] target/arm: Update regime_is_user for EL2&0 Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 31/34] target/arm: Update {fp, sve}_exception_el for VHE Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 32/34] target/arm: Enable ARMv8.1-VHE in -cpu max Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 33/34] target/arm: check TGE and E2H flags for EL0 pauth traps Richard Henderson
2019-08-03 18:48 ` [Qemu-devel] [PATCH v3 34/34] target/arm: generate a custom MIDR for -cpu max Richard Henderson
2019-08-05 13:02 ` [Qemu-devel] [PATCH v3 00/34] target/arm: Implement ARMv8.1-VHE Alex Bennée
2019-08-05 14:00 ` Richard Henderson
2019-08-05 14:23 ` Alex Bennée
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190803184800.8221-13-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=alex.bennee@linaro.org \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).