From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, qemu-arm@nongnu.org, alex.bennee@linaro.org
Subject: [Qemu-devel] [PATCH v3 01/34] cputlb: Add tlb_set_asid_for_mmuidx
Date: Sat, 3 Aug 2019 11:47:27 -0700 [thread overview]
Message-ID: <20190803184800.8221-2-richard.henderson@linaro.org> (raw)
In-Reply-To: <20190803184800.8221-1-richard.henderson@linaro.org>
Although we can't do much with ASIDs except remember them, this
will allow cleanups within target/ that should make things clearer.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v2: Assert cpu_is_self; only flush idx w/ asid mismatch.
v3: Improve asid comment.
---
include/exec/cpu-all.h | 11 +++++++++++
include/exec/cpu-defs.h | 2 ++
include/exec/exec-all.h | 19 +++++++++++++++++++
accel/tcg/cputlb.c | 26 ++++++++++++++++++++++++++
4 files changed, 58 insertions(+)
diff --git a/include/exec/cpu-all.h b/include/exec/cpu-all.h
index 536ea58f81..40b140cbba 100644
--- a/include/exec/cpu-all.h
+++ b/include/exec/cpu-all.h
@@ -439,4 +439,15 @@ static inline CPUTLB *env_tlb(CPUArchState *env)
return &env_neg(env)->tlb;
}
+/**
+ * cpu_tlb(env)
+ * @cpu: The generic CPUState
+ *
+ * Return the CPUTLB state associated with the cpu.
+ */
+static inline CPUTLB *cpu_tlb(CPUState *cpu)
+{
+ return &cpu_neg(cpu)->tlb;
+}
+
#endif /* CPU_ALL_H */
diff --git a/include/exec/cpu-defs.h b/include/exec/cpu-defs.h
index 9bc713a70b..b42986d822 100644
--- a/include/exec/cpu-defs.h
+++ b/include/exec/cpu-defs.h
@@ -169,6 +169,8 @@ typedef struct CPUTLBDesc {
size_t n_used_entries;
/* The next index to use in the tlb victim table. */
size_t vindex;
+ /* The current ASID for this tlb, if used; otherwise ignored. */
+ uint32_t asid;
/* The tlb victim table, in two parts. */
CPUTLBEntry vtable[CPU_VTLB_SIZE];
CPUIOTLBEntry viotlb[CPU_VTLB_SIZE];
diff --git a/include/exec/exec-all.h b/include/exec/exec-all.h
index 16034ee651..9c77aa5bf9 100644
--- a/include/exec/exec-all.h
+++ b/include/exec/exec-all.h
@@ -225,6 +225,21 @@ void tlb_flush_by_mmuidx_all_cpus(CPUState *cpu, uint16_t idxmap);
* depend on when the guests translation ends the TB.
*/
void tlb_flush_by_mmuidx_all_cpus_synced(CPUState *cpu, uint16_t idxmap);
+/**
+ * tlb_set_asid_for_mmuidx:
+ * @cpu: Originating cpu
+ * @asid: Address Space Identifier
+ * @idxmap: bitmap of MMU indexes to set to @asid
+ * @depmap: bitmap of dependent MMU indexes
+ *
+ * Set an ASID for all of @idxmap. If any previous ASID was different,
+ * then we will flush the mmu idx. If a flush is required, then also flush
+ * all dependent mmu indicies in @depmap. This latter is typically used
+ * for secondary page resolution, for implementing virtualization within
+ * the guest.
+ */
+void tlb_set_asid_for_mmuidx(CPUState *cpu, uint32_t asid,
+ uint16_t idxmap, uint16_t dep_idxmap);
/**
* tlb_set_page_with_attrs:
* @cpu: CPU to add this TLB entry for
@@ -310,6 +325,10 @@ static inline void tlb_flush_by_mmuidx_all_cpus_synced(CPUState *cpu,
uint16_t idxmap)
{
}
+static inline void tlb_set_asid_for_mmuidx(CPUState *cpu, uint32_t asid,
+ uint16_t idxmap, uint16_t depmap)
+{
+}
#endif
#define CODE_GEN_ALIGN 16 /* must be >= of the size of a icache line */
diff --git a/accel/tcg/cputlb.c b/accel/tcg/cputlb.c
index bb9897b25a..c68f57755b 100644
--- a/accel/tcg/cputlb.c
+++ b/accel/tcg/cputlb.c
@@ -540,6 +540,32 @@ void tlb_flush_page_all_cpus_synced(CPUState *src, target_ulong addr)
tlb_flush_page_by_mmuidx_all_cpus_synced(src, addr, ALL_MMUIDX_BITS);
}
+void tlb_set_asid_for_mmuidx(CPUState *cpu, uint32_t asid, uint16_t idxmap,
+ uint16_t depmap)
+{
+ CPUTLB *tlb = cpu_tlb(cpu);
+ uint16_t work, to_flush = 0;
+
+ /* It doesn't make sense to set context across cpus. */
+ assert_cpu_is_self(cpu);
+
+ /*
+ * We don't support ASIDs except for trivially.
+ * If there is any change, then we must flush the TLB.
+ */
+ for (work = idxmap; work != 0; work &= work - 1) {
+ int mmu_idx = ctz32(work);
+ if (tlb->d[mmu_idx].asid != asid) {
+ tlb->d[mmu_idx].asid = asid;
+ to_flush |= 1 << mmu_idx;
+ }
+ }
+ if (to_flush) {
+ to_flush |= depmap;
+ tlb_flush_by_mmuidx_async_work(cpu, RUN_ON_CPU_HOST_INT(to_flush));
+ }
+}
+
/* update the TLBs so that writes to code in the virtual page 'addr'
can be detected */
void tlb_protect_code(ram_addr_t ram_addr)
--
2.17.1
next prev parent reply other threads:[~2019-08-03 18:49 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-03 18:47 [Qemu-devel] [PATCH v3 00/34] target/arm: Implement ARMv8.1-VHE Richard Henderson
2019-08-03 18:47 ` Richard Henderson [this message]
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 02/34] cputlb: Add tlb_flush_asid_by_mmuidx and friends Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 03/34] target/arm: Install ASIDs for long-form from EL1 Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 04/34] target/arm: Install ASIDs for short-form " Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 05/34] target/arm: Install ASIDs for EL2 Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 06/34] target/arm: Define isar_feature_aa64_vh Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 07/34] target/arm: Enable HCR_E2H for VHE Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 08/34] target/arm: Add CONTEXTIDR_EL2 Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 09/34] target/arm: Add TTBR1_EL2 Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 10/34] target/arm: Update CNTVCT_EL0 for VHE Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 11/34] target/arm: Add the hypervisor virtual counter Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 12/34] target/arm: Add VHE system register redirection and aliasing Richard Henderson
2019-08-05 11:25 ` Alex Bennée
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 13/34] target/arm: Split out vae1_tlbmask, vmalle1_tlbmask Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 14/34] target/arm: Simplify tlb_force_broadcast alternatives Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 15/34] target/arm: Rename ARMMMUIdx*_S12NSE* to ARMMMUIdx*_E10_* Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 16/34] target/arm: Rename ARMMMUIdx_S2NS to ARMMMUIdx_Stage2 Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 17/34] target/arm: Rename ARMMMUIdx_S1NSE* to ARMMMUIdx_Stage1_E* Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 18/34] target/arm: Rename ARMMMUIdx_S1SE* to ARMMMUIdx_SE* Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 19/34] target/arm: Rename ARMMMUIdx*_S1E3 to ARMMMUIdx*_SE3 Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 20/34] target/arm: Rename ARMMMUIdx_S1E2 to ARMMMUIdx_E2 Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 21/34] target/arm: Reorganize ARMMMUIdx Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 22/34] target/arm: Add regime_has_2_ranges Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 23/34] target/arm: Update arm_mmu_idx for VHE Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 24/34] target/arm: Update arm_sctlr " Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 25/34] target/arm: Update aa64_zva_access for EL2 Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 26/34] target/arm: Update ctr_el0_access " Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 27/34] target/arm: Install asids for E2&0 translation regime Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 28/34] target/arm: Flush tlbs " Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 29/34] target/arm: Update arm_phys_excp_target_el for TGE Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 30/34] target/arm: Update regime_is_user for EL2&0 Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 31/34] target/arm: Update {fp, sve}_exception_el for VHE Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 32/34] target/arm: Enable ARMv8.1-VHE in -cpu max Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 33/34] target/arm: check TGE and E2H flags for EL0 pauth traps Richard Henderson
2019-08-03 18:48 ` [Qemu-devel] [PATCH v3 34/34] target/arm: generate a custom MIDR for -cpu max Richard Henderson
2019-08-05 13:02 ` [Qemu-devel] [PATCH v3 00/34] target/arm: Implement ARMv8.1-VHE Alex Bennée
2019-08-05 14:00 ` Richard Henderson
2019-08-05 14:23 ` Alex Bennée
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190803184800.8221-2-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=alex.bennee@linaro.org \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).