From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, qemu-arm@nongnu.org, alex.bennee@linaro.org
Subject: [Qemu-devel] [PATCH v3 03/34] target/arm: Install ASIDs for long-form from EL1
Date: Sat, 3 Aug 2019 11:47:29 -0700 [thread overview]
Message-ID: <20190803184800.8221-4-richard.henderson@linaro.org> (raw)
In-Reply-To: <20190803184800.8221-1-richard.henderson@linaro.org>
In addition to providing the core with the current ASID, this minimizes
both the number of flushes due to non-changing ASID as well as the set
of mmu_idx that are affected by each flush.
In particular, updates to the secure mode registers flushes only the
relevant secure mode mmu_idx's, and similarly non-secure updates only
affect non-secure mmu_idx's.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
target/arm/helper.c | 73 +++++++++++++++++++++++++++++----------------
1 file changed, 48 insertions(+), 25 deletions(-)
diff --git a/target/arm/helper.c b/target/arm/helper.c
index b74c23a9bc..2a65f4127e 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -3327,6 +3327,36 @@ static const ARMCPRegInfo pmsav5_cp_reginfo[] = {
REGINFO_SENTINEL
};
+/* Called after a change to any of TTBR*_EL1 or TTBCR_EL1. */
+static void update_lpae_el1_asid(CPUARMState *env, int secure)
+{
+ CPUState *cs = env_cpu(env);
+ uint64_t ttbr0, ttbr1, ttcr;
+ int asid, idxmask;
+
+ switch (secure) {
+ case ARM_CP_SECSTATE_S:
+ ttbr0 = env->cp15.ttbr0_s;
+ ttbr1 = env->cp15.ttbr1_s;
+ ttcr = env->cp15.tcr_el[3].raw_tcr;
+ /* Note that cp15.ttbr0_s == cp15.ttbr0_el[3], so S1E3 is affected. */
+ /* ??? Secure EL3 really using the ASID field? Doesn't make sense. */
+ idxmask = ARMMMUIdxBit_S1SE1 | ARMMMUIdxBit_S1SE0 | ARMMMUIdxBit_S1E3;
+ break;
+ case ARM_CP_SECSTATE_NS:
+ ttbr0 = env->cp15.ttbr0_ns;
+ ttbr1 = env->cp15.ttbr1_ns;
+ ttcr = env->cp15.tcr_el[1].raw_tcr;
+ idxmask = ARMMMUIdxBit_S12NSE1 | ARMMMUIdxBit_S12NSE0;
+ break;
+ default:
+ g_assert_not_reached();
+ }
+ asid = extract64(ttcr & TTBCR_A1 ? ttbr1 : ttbr0, 48, 16);
+
+ tlb_set_asid_for_mmuidx(cs, asid, idxmask, 0);
+}
+
static void vmsa_ttbcr_raw_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
@@ -3363,18 +3393,16 @@ static void vmsa_ttbcr_raw_write(CPUARMState *env, const ARMCPRegInfo *ri,
static void vmsa_ttbcr_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
- ARMCPU *cpu = env_archcpu(env);
TCR *tcr = raw_ptr(env, ri);
- if (arm_feature(env, ARM_FEATURE_LPAE)) {
- /* With LPAE the TTBCR could result in a change of ASID
- * via the TTBCR.A1 bit, so do a TLB flush.
- */
- tlb_flush(CPU(cpu));
- }
/* Preserve the high half of TCR_EL1, set via TTBCR2. */
value = deposit64(tcr->raw_tcr, 0, 32, value);
vmsa_ttbcr_raw_write(env, ri, value);
+
+ if (arm_feature(env, ARM_FEATURE_LPAE)) {
+ /* The A1 bit controls which ASID is active. */
+ update_lpae_el1_asid(env, ri->secure);
+ }
}
static void vmsa_ttbcr_reset(CPUARMState *env, const ARMCPRegInfo *ri)
@@ -3392,24 +3420,19 @@ static void vmsa_ttbcr_reset(CPUARMState *env, const ARMCPRegInfo *ri)
static void vmsa_tcr_el1_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
- ARMCPU *cpu = env_archcpu(env);
- TCR *tcr = raw_ptr(env, ri);
-
- /* For AArch64 the A1 bit could result in a change of ASID, so TLB flush. */
- tlb_flush(CPU(cpu));
- tcr->raw_tcr = value;
+ raw_write(env, ri, value);
+ /* The A1 bit controls which ASID is active. */
+ update_lpae_el1_asid(env, ri->secure);
}
-static void vmsa_ttbr_write(CPUARMState *env, const ARMCPRegInfo *ri,
- uint64_t value)
+static void vmsa_ttbr_el1_write(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value)
{
- /* If the ASID changes (with a 64-bit write), we must flush the TLB. */
- if (cpreg_field_is_64bit(ri) &&
- extract64(raw_read(env, ri) ^ value, 48, 16) != 0) {
- ARMCPU *cpu = env_archcpu(env);
- tlb_flush(CPU(cpu));
- }
raw_write(env, ri, value);
+ if (cpreg_field_is_64bit(ri)) {
+ /* The LPAE format (64-bit write) contains an ASID field. */
+ update_lpae_el1_asid(env, ri->secure);
+ }
}
static void vttbr_write(CPUARMState *env, const ARMCPRegInfo *ri,
@@ -3455,12 +3478,12 @@ static const ARMCPRegInfo vmsa_cp_reginfo[] = {
.fieldoffset = offsetof(CPUARMState, cp15.esr_el[1]), .resetvalue = 0, },
{ .name = "TTBR0_EL1", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 0, .crn = 2, .crm = 0, .opc2 = 0,
- .access = PL1_RW, .writefn = vmsa_ttbr_write, .resetvalue = 0,
+ .access = PL1_RW, .writefn = vmsa_ttbr_el1_write, .resetvalue = 0,
.bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr0_s),
offsetof(CPUARMState, cp15.ttbr0_ns) } },
{ .name = "TTBR1_EL1", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 0, .crn = 2, .crm = 0, .opc2 = 1,
- .access = PL1_RW, .writefn = vmsa_ttbr_write, .resetvalue = 0,
+ .access = PL1_RW, .writefn = vmsa_ttbr_el1_write, .resetvalue = 0,
.bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr1_s),
offsetof(CPUARMState, cp15.ttbr1_ns) } },
{ .name = "TCR_EL1", .state = ARM_CP_STATE_AA64,
@@ -3715,12 +3738,12 @@ static const ARMCPRegInfo lpae_cp_reginfo[] = {
.access = PL1_RW, .type = ARM_CP_64BIT | ARM_CP_ALIAS,
.bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr0_s),
offsetof(CPUARMState, cp15.ttbr0_ns) },
- .writefn = vmsa_ttbr_write, },
+ .writefn = vmsa_ttbr_el1_write, },
{ .name = "TTBR1", .cp = 15, .crm = 2, .opc1 = 1,
.access = PL1_RW, .type = ARM_CP_64BIT | ARM_CP_ALIAS,
.bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr1_s),
offsetof(CPUARMState, cp15.ttbr1_ns) },
- .writefn = vmsa_ttbr_write, },
+ .writefn = vmsa_ttbr_el1_write, },
REGINFO_SENTINEL
};
--
2.17.1
next prev parent reply other threads:[~2019-08-03 18:51 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-03 18:47 [Qemu-devel] [PATCH v3 00/34] target/arm: Implement ARMv8.1-VHE Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 01/34] cputlb: Add tlb_set_asid_for_mmuidx Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 02/34] cputlb: Add tlb_flush_asid_by_mmuidx and friends Richard Henderson
2019-08-03 18:47 ` Richard Henderson [this message]
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 04/34] target/arm: Install ASIDs for short-form from EL1 Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 05/34] target/arm: Install ASIDs for EL2 Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 06/34] target/arm: Define isar_feature_aa64_vh Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 07/34] target/arm: Enable HCR_E2H for VHE Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 08/34] target/arm: Add CONTEXTIDR_EL2 Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 09/34] target/arm: Add TTBR1_EL2 Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 10/34] target/arm: Update CNTVCT_EL0 for VHE Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 11/34] target/arm: Add the hypervisor virtual counter Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 12/34] target/arm: Add VHE system register redirection and aliasing Richard Henderson
2019-08-05 11:25 ` Alex Bennée
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 13/34] target/arm: Split out vae1_tlbmask, vmalle1_tlbmask Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 14/34] target/arm: Simplify tlb_force_broadcast alternatives Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 15/34] target/arm: Rename ARMMMUIdx*_S12NSE* to ARMMMUIdx*_E10_* Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 16/34] target/arm: Rename ARMMMUIdx_S2NS to ARMMMUIdx_Stage2 Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 17/34] target/arm: Rename ARMMMUIdx_S1NSE* to ARMMMUIdx_Stage1_E* Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 18/34] target/arm: Rename ARMMMUIdx_S1SE* to ARMMMUIdx_SE* Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 19/34] target/arm: Rename ARMMMUIdx*_S1E3 to ARMMMUIdx*_SE3 Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 20/34] target/arm: Rename ARMMMUIdx_S1E2 to ARMMMUIdx_E2 Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 21/34] target/arm: Reorganize ARMMMUIdx Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 22/34] target/arm: Add regime_has_2_ranges Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 23/34] target/arm: Update arm_mmu_idx for VHE Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 24/34] target/arm: Update arm_sctlr " Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 25/34] target/arm: Update aa64_zva_access for EL2 Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 26/34] target/arm: Update ctr_el0_access " Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 27/34] target/arm: Install asids for E2&0 translation regime Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 28/34] target/arm: Flush tlbs " Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 29/34] target/arm: Update arm_phys_excp_target_el for TGE Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 30/34] target/arm: Update regime_is_user for EL2&0 Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 31/34] target/arm: Update {fp, sve}_exception_el for VHE Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 32/34] target/arm: Enable ARMv8.1-VHE in -cpu max Richard Henderson
2019-08-03 18:47 ` [Qemu-devel] [PATCH v3 33/34] target/arm: check TGE and E2H flags for EL0 pauth traps Richard Henderson
2019-08-03 18:48 ` [Qemu-devel] [PATCH v3 34/34] target/arm: generate a custom MIDR for -cpu max Richard Henderson
2019-08-05 13:02 ` [Qemu-devel] [PATCH v3 00/34] target/arm: Implement ARMv8.1-VHE Alex Bennée
2019-08-05 14:00 ` Richard Henderson
2019-08-05 14:23 ` Alex Bennée
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190803184800.8221-4-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=alex.bennee@linaro.org \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).