From: David Gibson <david@gibson.dropbear.id.au>
To: Daniel Black <daniel@linux.ibm.com>
Cc: "open list:sPAPR" <qemu-ppc@nongnu.org>,
Greg Kurz <groug@kaod.org>,
"open list:All patches CC here" <qemu-devel@nongnu.org>
Subject: Re: [Qemu-devel] [PATCH v4] spapr: quantify error messages regarding capability settings
Date: Mon, 12 Aug 2019 18:00:34 +1000 [thread overview]
Message-ID: <20190812080034.GB3947@umbus.fritz.box> (raw)
In-Reply-To: <20190812071044.30806-1-daniel@linux.ibm.com>
[-- Attachment #1: Type: text/plain, Size: 7469 bytes --]
On Mon, Aug 12, 2019 at 05:10:44PM +1000, Daniel Black wrote:
> Its not immediately obvious how cap-X=Y setting need to be applied
> to the command line so, for spapr capability error messages, this
> has been clarified to:
>
> appending -machine cap-X=Y
>
> The wrong value messages have been left as is, as the user has found
> the right location.
Applied to ppc-for-4.2.
>
> Reviewed-by: Greg Kurz <groug@kaod.org>
> Signed-off-by: Daniel Black <daniel@linux.ibm.com>
> ---
> v4 Message inline rather than macro. greppability nitpick accepted with
> grace and the magic of %s/CAPABILITY_HINT("\([^"]*\)")/" try appending -machine \1"/g.
> v3 Hint, and not all messages, (can't use error_append_hint on
> error_fatal) from Greg Kurz
> v2 Improved error message thanks David Gibson
>
> Left the "appending" as its not obvious more that one -machine
> arguement is allowed.
>
> hw/ppc/spapr_caps.c | 42 ++++++++++++++++++++++++++++--------------
> 1 file changed, 28 insertions(+), 14 deletions(-)
>
> diff --git a/hw/ppc/spapr_caps.c b/hw/ppc/spapr_caps.c
> index bbb001f84a..405286db6f 100644
> --- a/hw/ppc/spapr_caps.c
> +++ b/hw/ppc/spapr_caps.c
> @@ -194,10 +194,12 @@ static void cap_htm_apply(SpaprMachineState *spapr, uint8_t val, Error **errp)
> }
> if (tcg_enabled()) {
> error_setg(errp,
> - "No Transactional Memory support in TCG, try cap-htm=off");
> + "No Transactional Memory support in TCG,"
> + " try appending -machine cap-htm=off");
> } else if (kvm_enabled() && !kvmppc_has_cap_htm()) {
> error_setg(errp,
> -"KVM implementation does not support Transactional Memory, try cap-htm=off"
> +"KVM implementation does not support Transactional Memory,"
> + " try appending -machine cap-htm=off"
> );
> }
> }
> @@ -215,7 +217,8 @@ static void cap_vsx_apply(SpaprMachineState *spapr, uint8_t val, Error **errp)
> * rid of anything that doesn't do VMX */
> g_assert(env->insns_flags & PPC_ALTIVEC);
> if (!(env->insns_flags2 & PPC2_VSX)) {
> - error_setg(errp, "VSX support not available, try cap-vsx=off");
> + error_setg(errp, "VSX support not available,"
> + " try appending -machine cap-vsx=off");
> }
> }
>
> @@ -229,7 +232,8 @@ static void cap_dfp_apply(SpaprMachineState *spapr, uint8_t val, Error **errp)
> return;
> }
> if (!(env->insns_flags2 & PPC2_DFP)) {
> - error_setg(errp, "DFP support not available, try cap-dfp=off");
> + error_setg(errp, "DFP support not available,"
> + " try appending -machine cap-dfp=off");
> }
> }
>
> @@ -253,7 +257,8 @@ static void cap_safe_cache_apply(SpaprMachineState *spapr, uint8_t val,
> cap_cfpc_possible.vals[val]);
> } else if (kvm_enabled() && (val > kvm_val)) {
> error_setg(errp,
> -"Requested safe cache capability level not supported by kvm, try cap-cfpc=%s",
> + "Requested safe cache capability level not supported by kvm,"
> + " try appending -machine cap-cfpc=%s",
> cap_cfpc_possible.vals[kvm_val]);
> }
>
> @@ -281,7 +286,8 @@ static void cap_safe_bounds_check_apply(SpaprMachineState *spapr, uint8_t val,
> cap_sbbc_possible.vals[val]);
> } else if (kvm_enabled() && (val > kvm_val)) {
> error_setg(errp,
> -"Requested safe bounds check capability level not supported by kvm, try cap-sbbc=%s",
> +"Requested safe bounds check capability level not supported by kvm,"
> + " try appending -machine cap-sbbc=%s",
> cap_sbbc_possible.vals[kvm_val]);
> }
>
> @@ -312,7 +318,8 @@ static void cap_safe_indirect_branch_apply(SpaprMachineState *spapr,
> cap_ibs_possible.vals[val]);
> } else if (kvm_enabled() && (val > kvm_val)) {
> error_setg(errp,
> -"Requested safe indirect branch capability level not supported by kvm, try cap-ibs=%s",
> +"Requested safe indirect branch capability level not supported by kvm,"
> + " try appending -machine cap-ibs=%s",
> cap_ibs_possible.vals[kvm_val]);
> }
>
> @@ -401,11 +408,13 @@ static void cap_nested_kvm_hv_apply(SpaprMachineState *spapr,
>
> if (tcg_enabled()) {
> error_setg(errp,
> - "No Nested KVM-HV support in tcg, try cap-nested-hv=off");
> + "No Nested KVM-HV support in tcg,"
> + " try appending -machine cap-nested-hv=off");
> } else if (kvm_enabled()) {
> if (!kvmppc_has_cap_nested_kvm_hv()) {
> error_setg(errp,
> -"KVM implementation does not support Nested KVM-HV, try cap-nested-hv=off");
> +"KVM implementation does not support Nested KVM-HV,"
> + " try appending -machine cap-nested-hv=off");
> } else if (kvmppc_set_cap_nested_kvm_hv(val) < 0) {
> error_setg(errp,
> "Error enabling cap-nested-hv with KVM, try cap-nested-hv=off");
> @@ -435,10 +444,12 @@ static void cap_large_decr_apply(SpaprMachineState *spapr,
>
> if (!kvm_nr_bits) {
> error_setg(errp,
> - "No large decrementer support, try cap-large-decr=off");
> + "No large decrementer support,"
> + " try appending -machine cap-large-decr=off");
> } else if (pcc->lrg_decr_bits != kvm_nr_bits) {
> error_setg(errp,
> -"KVM large decrementer size (%d) differs to model (%d), try -cap-large-decr=off",
> +"KVM large decrementer size (%d) differs to model (%d),"
> + " try appending -machine cap-large-decr=off",
> kvm_nr_bits, pcc->lrg_decr_bits);
> }
> }
> @@ -454,7 +465,8 @@ static void cap_large_decr_cpu_apply(SpaprMachineState *spapr,
> if (kvm_enabled()) {
> if (kvmppc_enable_cap_large_decr(cpu, val)) {
> error_setg(errp,
> - "No large decrementer support, try cap-large-decr=off");
> + "No large decrementer support,"
> + " try appending -machine cap-large-decr=off");
> }
> }
>
> @@ -474,10 +486,12 @@ static void cap_ccf_assist_apply(SpaprMachineState *spapr, uint8_t val,
> if (tcg_enabled() && val) {
> /* TODO - for now only allow broken for TCG */
> error_setg(errp,
> -"Requested count cache flush assist capability level not supported by tcg, try cap-ccf-assist=off");
> +"Requested count cache flush assist capability level not supported by tcg,"
> + " try appending -machine cap-ccf-assist=off");
> } else if (kvm_enabled() && (val > kvm_val)) {
> error_setg(errp,
> -"Requested count cache flush assist capability level not supported by kvm, try cap-ccf-assist=off");
> +"Requested count cache flush assist capability level not supported by kvm,"
> + " try appending -machine cap-ccf-assist=off");
> }
> }
>
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
prev parent reply other threads:[~2019-08-12 9:15 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-12 7:10 [Qemu-devel] [PATCH v4] spapr: quantify error messages regarding capability settings Daniel Black
2019-08-12 8:00 ` David Gibson [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190812080034.GB3947@umbus.fritz.box \
--to=david@gibson.dropbear.id.au \
--cc=daniel@linux.ibm.com \
--cc=groug@kaod.org \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).