qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Thomas Huth <thuth@redhat.com>
To: "Paolo Bonzini" <pbonzini@redhat.com>,
	"Yang Zhong" <yang.zhong@intel.com>,
	"Philippe Mathieu-Daudé" <philmd@redhat.com>,
	qemu-devel@nongnu.org
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>,
	qemu-arm@nongnu.org,
	Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>,
	Artyom Tarasenko <atar4qemu@gmail.com>,
	Peter Maydell <peter.maydell@linaro.org>
Subject: [Qemu-devel] [PATCH v3 7/8] hw/misc: Add a config switch for the "unimplemented" device
Date: Sat, 17 Aug 2019 12:19:30 +0200	[thread overview]
Message-ID: <20190817101931.28386-8-thuth@redhat.com> (raw)
In-Reply-To: <20190817101931.28386-1-thuth@redhat.com>

The device is only used by some few boards. Let's use a proper Kconfig
switch so that we only compile this code if we really need it.

Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 hw/arm/Kconfig        | 11 +++++++++++
 hw/microblaze/Kconfig |  1 +
 hw/misc/Kconfig       |  3 +++
 hw/misc/Makefile.objs |  2 +-
 hw/sparc64/Kconfig    |  1 +
 5 files changed, 17 insertions(+), 1 deletion(-)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 6e24c73b54..76a2a6bcbf 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -82,6 +82,7 @@ config MUSCA
     select PL011
     select PL031
     select SPLIT_IRQ
+    select UNIMP
 
 config MUSICPAL
     bool
@@ -217,6 +218,7 @@ config STELLARIS
     select SSI_SD
     select STELLARIS_INPUT
     select STELLARIS_ENET # ethernet
+    select UNIMP
 
 config STRONGARM
     bool
@@ -283,6 +285,7 @@ config ALLWINNER_A10
     select ALLWINNER_A10_PIC
     select ALLWINNER_EMAC
     select SERIAL
+    select UNIMP
 
 config RASPI
     bool
@@ -320,6 +323,7 @@ config XLNX_VERSAL
     select PL011
     select CADENCE
     select VIRTIO_MMIO
+    select UNIMP
 
 config FSL_IMX25
     bool
@@ -355,6 +359,7 @@ config ASPEED_SOC
     select SSI_M25P80
     select TMP105
     select TMP421
+    select UNIMP
 
 config MPS2
     bool
@@ -366,6 +371,7 @@ config MPS2
     select PL022    # Serial port
     select PL080    # DMA controller
     select SPLIT_IRQ
+    select UNIMP
 
 config FSL_IMX7
     bool
@@ -378,6 +384,7 @@ config FSL_IMX7
     select IMX_I2C
     select PCI_EXPRESS_DESIGNWARE
     select SDHCI
+    select UNIMP
 
 config ARM_SMMUV3
     bool
@@ -389,6 +396,7 @@ config FSL_IMX6UL
     select IMX_FEC
     select IMX_I2C
     select SDHCI
+    select UNIMP
 
 config MICROBIT
     bool
@@ -398,6 +406,7 @@ config NRF51_SOC
     bool
     select I2C
     select ARM_V7M
+    select UNIMP
 
 config EMCRAFT_SF2
     bool
@@ -410,6 +419,7 @@ config MSF2
     select PTIMER
     select SERIAL
     select SSI
+    select UNIMP
 
 config ZAURUS
     bool
@@ -448,6 +458,7 @@ config ARMSSE
     select TZ_MPC
     select TZ_MSC
     select TZ_PPC
+    select UNIMP
 
 config ARMSSE_CPUID
     bool
diff --git a/hw/microblaze/Kconfig b/hw/microblaze/Kconfig
index c4dc120973..e2697ced9c 100644
--- a/hw/microblaze/Kconfig
+++ b/hw/microblaze/Kconfig
@@ -4,6 +4,7 @@ config PETALOGIX_S3ADSP1800
     select XILINX
     select XILINX_AXI
     select XILINX_ETHLITE
+    select UNIMP
 
 config PETALOGIX_ML605
     bool
diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig
index 385e1b0cec..51754bb47c 100644
--- a/hw/misc/Kconfig
+++ b/hw/misc/Kconfig
@@ -117,4 +117,7 @@ config AUX
     bool
     select I2C
 
+config UNIMP
+    bool
+
 source macio/Kconfig
diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs
index e9aab519a1..e4aad707fb 100644
--- a/hw/misc/Makefile.objs
+++ b/hw/misc/Makefile.objs
@@ -9,7 +9,7 @@ common-obj-$(CONFIG_PCI_TESTDEV) += pci-testdev.o
 common-obj-$(CONFIG_EDU) += edu.o
 common-obj-$(CONFIG_PCA9552) += pca9552.o
 
-common-obj-y += unimp.o
+common-obj-$(CONFIG_UNIMP) += unimp.o
 common-obj-$(CONFIG_FW_CFG_DMA) += vmcoreinfo.o
 
 # ARM devices
diff --git a/hw/sparc64/Kconfig b/hw/sparc64/Kconfig
index d4d76a89be..f9f8b0f73a 100644
--- a/hw/sparc64/Kconfig
+++ b/hw/sparc64/Kconfig
@@ -17,3 +17,4 @@ config NIAGARA
     bool
     select EMPTY_SLOT
     select SUN4V_RTC
+    select UNIMP
-- 
2.18.1



  parent reply	other threads:[~2019-08-17 10:24 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-17 10:19 [Qemu-devel] [PATCH v3 0/8] Kconfig switches Thomas Huth
2019-08-17 10:19 ` [Qemu-devel] [PATCH v3 1/8] hw/Kconfig: Move the generic XLNX_ZYNQMP to the root hw/Kconfig Thomas Huth
2019-08-17 10:19 ` [Qemu-devel] [PATCH v3 2/8] hw/intc: Only build the xlnx-iomod-intc device for the MicroBlaze PMU Thomas Huth
2019-08-17 10:19 ` [Qemu-devel] [PATCH v3 3/8] hw/dma: Do not build the xlnx_dpdma device for the MicroBlaze machines Thomas Huth
2019-08-17 10:19 ` [Qemu-devel] [PATCH v3 4/8] hw/core: Add a config switch for the "register" device Thomas Huth
2019-08-19 11:54   ` Philippe Mathieu-Daudé
2019-08-19 20:07   ` Alistair Francis
2019-08-17 10:19 ` [Qemu-devel] [PATCH v3 5/8] hw/core: Add a config switch for the "or-irq" device Thomas Huth
2019-08-17 10:19 ` [Qemu-devel] [PATCH v3 6/8] hw/core: Add a config switch for the "split-irq" device Thomas Huth
2019-08-17 10:19 ` Thomas Huth [this message]
2019-08-19 12:47   ` [Qemu-devel] [PATCH v3 7/8] hw/misc: Add a config switch for the "unimplemented" device Philippe Mathieu-Daudé
2019-08-17 10:19 ` [Qemu-devel] [PATCH v3 8/8] hw/core: Add a config switch for the generic loader device Thomas Huth
2019-08-19 17:47 ` [Qemu-devel] [PATCH v3 0/8] Kconfig switches Paolo Bonzini
2019-08-19 19:29   ` Thomas Huth

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190817101931.28386-8-thuth@redhat.com \
    --to=thuth@redhat.com \
    --cc=atar4qemu@gmail.com \
    --cc=edgar.iglesias@gmail.com \
    --cc=mark.cave-ayland@ilande.co.uk \
    --cc=pbonzini@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=philmd@redhat.com \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=yang.zhong@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).