From: minyard@acm.org
To: QEMU Developers <qemu-devel@nongnu.org>
Cc: Corey Minyard <cminyard@mvista.com>,
Peter Maydell <peter.maydell@linaro.org>
Subject: [Qemu-devel] [PATCH 04/15] tests:ipmi: Fix IPMI BT tests
Date: Mon, 19 Aug 2019 15:16:54 -0500 [thread overview]
Message-ID: <20190819201705.31633-5-minyard@acm.org> (raw)
In-Reply-To: <20190819201705.31633-1-minyard@acm.org>
From: Corey Minyard <cminyard@mvista.com>
The IPMI BT tests had a race condition, if it receive an IPMI command
to enable interrupt, it would write the message to enable interrupts
after it wrote the command response. So the test code could
receive the command response and issue the next command before the
device handled the interrupt enable command, and thus no interrupt.
So send the message to enable interrupt before the command response.
Also add some sleeps to give qemu time to handle responses, there was
no delay before, and it could result in an invalid timeout.
And re-enable the tests, as hopefully they are fixed now.
Note that I was unable to reproduce this even with the instructions
Peter gave me, but hopefully this fixes the issue.
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
---
tests/Makefile.include | 3 +--
tests/ipmi-bt-test.c | 4 +++-
2 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/tests/Makefile.include b/tests/Makefile.include
index fd7fdb8658..6fc3abfc42 100644
--- a/tests/Makefile.include
+++ b/tests/Makefile.include
@@ -169,8 +169,7 @@ check-qtest-i386-$(CONFIG_SGA) += tests/boot-serial-test$(EXESUF)
check-qtest-i386-$(CONFIG_SLIRP) += tests/pxe-test$(EXESUF)
check-qtest-i386-y += tests/rtc-test$(EXESUF)
check-qtest-i386-$(CONFIG_ISA_IPMI_KCS) += tests/ipmi-kcs-test$(EXESUF)
-# Disabled temporarily as it fails intermittently especially under NetBSD VM
-# check-qtest-i386-$(CONFIG_ISA_IPMI_BT) += tests/ipmi-bt-test$(EXESUF)
+check-qtest-i386-$(CONFIG_ISA_IPMI_BT) += tests/ipmi-bt-test$(EXESUF)
check-qtest-i386-y += tests/i440fx-test$(EXESUF)
check-qtest-i386-y += tests/fw_cfg-test$(EXESUF)
check-qtest-i386-y += tests/device-plug-test$(EXESUF)
diff --git a/tests/ipmi-bt-test.c b/tests/ipmi-bt-test.c
index fc4c83b5db..9f3e638146 100644
--- a/tests/ipmi-bt-test.c
+++ b/tests/ipmi-bt-test.c
@@ -99,6 +99,7 @@ static void bt_wait_b_busy(void)
unsigned int count = 1000;
while (IPMI_BT_CTLREG_GET_B_BUSY() != 0) {
g_assert(--count != 0);
+ usleep(100);
}
}
@@ -107,6 +108,7 @@ static void bt_wait_b2h_atn(void)
unsigned int count = 1000;
while (IPMI_BT_CTLREG_GET_B2H_ATN() == 0) {
g_assert(--count != 0);
+ usleep(100);
}
}
@@ -240,13 +242,13 @@ static void emu_msg_handler(void)
write_emu_msg(msg, msg_len);
} else if ((msg[1] == set_bmc_globals_cmd[0]) &&
(msg[2] == set_bmc_globals_cmd[1])) {
+ write_emu_msg(enable_irq_cmd, sizeof(enable_irq_cmd));
memcpy(msg + 1, set_bmc_globals_rsp, sizeof(set_bmc_globals_rsp));
msg_len = sizeof(set_bmc_globals_rsp) + 1;
msg[msg_len] = -ipmb_checksum(msg, msg_len, 0);
msg_len++;
msg[msg_len++] = 0xa0;
write_emu_msg(msg, msg_len);
- write_emu_msg(enable_irq_cmd, sizeof(enable_irq_cmd));
} else {
g_assert(0);
}
--
2.17.1
next prev parent reply other threads:[~2019-08-19 20:21 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-19 20:16 [Qemu-devel] [PATCH 00/15] IPMI updates for 4.3 minyard
2019-08-19 20:16 ` [Qemu-devel] [PATCH 01/15] ipmi: Fix watchdog NMI handling minyard
2019-08-19 20:16 ` [Qemu-devel] [PATCH 02/15] ipmi: Fix the get watchdog command minyard
2019-08-19 20:16 ` [Qemu-devel] [PATCH 03/15] ipmi: Generate an interrupt on watchdog pretimeout expiry minyard
2019-08-19 20:16 ` minyard [this message]
2019-08-19 20:16 ` [Qemu-devel] [PATCH 05/15] qdev: Add a no default uuid property minyard
2019-08-19 20:16 ` [Qemu-devel] [PATCH 06/15] ipmi: Add a UUID device property minyard
2019-08-19 20:16 ` [Qemu-devel] [PATCH 07/15] ipmi: Split out KCS-specific code from ISA KCS code minyard
2019-08-21 9:11 ` Philippe Mathieu-Daudé
2019-08-19 20:16 ` [Qemu-devel] [PATCH 08/15] ipmi: Split out BT-specific code from ISA BT code minyard
2019-08-21 9:09 ` Philippe Mathieu-Daudé
2019-08-19 20:16 ` [Qemu-devel] [PATCH 09/15] ipmi: Allow a size value to be passed for I/O space minyard
2019-08-19 20:17 ` [Qemu-devel] [PATCH 10/15] smbios:ipmi: Ignore IPMI devices with no fwinfo function minyard
2019-08-19 20:17 ` [Qemu-devel] [PATCH 11/15] ipmi: Add PCI IPMI interfaces minyard
2019-08-19 20:17 ` [Qemu-devel] [PATCH 12/15] ipmi: Add an SMBus IPMI interface minyard
2019-08-19 20:17 ` [Qemu-devel] [PATCH 13/15] acpi: Add i2c serial bus CRS handling minyard
2019-08-19 20:17 ` [Qemu-devel] [PATCH 14/15] ipmi: Fix SSIF ACPI handling to use the right CRS minyard
2019-08-19 20:17 ` [Qemu-devel] [PATCH 15/15] pc: Add an SMB0 ACPI device to q35 minyard
2019-09-13 19:59 ` Corey Minyard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190819201705.31633-5-minyard@acm.org \
--to=minyard@acm.org \
--cc=cminyard@mvista.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).