* [Qemu-devel] [PULL 1/8] hw/Kconfig: Move the generic XLNX_ZYNQMP to the root hw/Kconfig
2019-08-20 7:47 [Qemu-devel] [PULL 0/8] Improvements for the Kconfig switches and Makefiles Thomas Huth
@ 2019-08-20 7:47 ` Thomas Huth
2019-08-20 7:47 ` [Qemu-devel] [PULL 2/8] hw/intc: Only build the xlnx-iomod-intc device for the MicroBlaze PMU Thomas Huth
` (7 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Thomas Huth @ 2019-08-20 7:47 UTC (permalink / raw)
To: Peter Maydell, qemu-devel; +Cc: philmd
From: Philippe Mathieu-Daudé <philmd@redhat.com>
The XLNX_ZYNQMP config is used in multiple subdirectories
(timer, intc). Move it to the root hw/Kconfig.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190427141459.19728-2-philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
hw/Kconfig | 3 +++
hw/timer/Kconfig | 3 ---
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/hw/Kconfig b/hw/Kconfig
index 195f541e50..dbae1c0852 100644
--- a/hw/Kconfig
+++ b/hw/Kconfig
@@ -73,3 +73,6 @@ config XILINX
config XILINX_AXI
bool
select PTIMER # for hw/dma/xilinx_axidma.c
+
+config XLNX_ZYNQMP
+ bool
diff --git a/hw/timer/Kconfig b/hw/timer/Kconfig
index 51921eb63f..eefc95f35e 100644
--- a/hw/timer/Kconfig
+++ b/hw/timer/Kconfig
@@ -34,9 +34,6 @@ config TWL92230
bool
depends on I2C
-config XLNX_ZYNQMP
- bool
-
config ALTERA_TIMER
bool
select PTIMER
--
2.18.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [Qemu-devel] [PULL 2/8] hw/intc: Only build the xlnx-iomod-intc device for the MicroBlaze PMU
2019-08-20 7:47 [Qemu-devel] [PULL 0/8] Improvements for the Kconfig switches and Makefiles Thomas Huth
2019-08-20 7:47 ` [Qemu-devel] [PULL 1/8] hw/Kconfig: Move the generic XLNX_ZYNQMP to the root hw/Kconfig Thomas Huth
@ 2019-08-20 7:47 ` Thomas Huth
2019-08-20 7:47 ` [Qemu-devel] [PULL 3/8] hw/dma: Do not build the xlnx_dpdma device for the MicroBlaze machines Thomas Huth
` (6 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Thomas Huth @ 2019-08-20 7:47 UTC (permalink / raw)
To: Peter Maydell, qemu-devel; +Cc: philmd
From: Philippe Mathieu-Daudé <philmd@redhat.com>
The Xilinx I/O Module Interrupt Controller is only used by the
MicroBlaze PMU, not by the AArch64 machine.
Move it from the generic ZynqMP object list to the PMU specific.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190427141459.19728-3-philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
hw/intc/Makefile.objs | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/hw/intc/Makefile.objs b/hw/intc/Makefile.objs
index 03019b9a03..f726d87532 100644
--- a/hw/intc/Makefile.objs
+++ b/hw/intc/Makefile.objs
@@ -3,7 +3,7 @@ common-obj-$(CONFIG_I8259) += i8259_common.o i8259.o
common-obj-$(CONFIG_PL190) += pl190.o
common-obj-$(CONFIG_PUV3) += puv3_intc.o
common-obj-$(CONFIG_XILINX) += xilinx_intc.o
-common-obj-$(CONFIG_XLNX_ZYNQMP) += xlnx-pmu-iomod-intc.o
+common-obj-$(CONFIG_XLNX_ZYNQMP_PMU) += xlnx-pmu-iomod-intc.o
common-obj-$(CONFIG_XLNX_ZYNQMP) += xlnx-zynqmp-ipi.o
common-obj-$(CONFIG_ETRAXFS) += etraxfs_pic.o
common-obj-$(CONFIG_IMX) += imx_avic.o imx_gpcv2.o
--
2.18.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [Qemu-devel] [PULL 3/8] hw/dma: Do not build the xlnx_dpdma device for the MicroBlaze machines
2019-08-20 7:47 [Qemu-devel] [PULL 0/8] Improvements for the Kconfig switches and Makefiles Thomas Huth
2019-08-20 7:47 ` [Qemu-devel] [PULL 1/8] hw/Kconfig: Move the generic XLNX_ZYNQMP to the root hw/Kconfig Thomas Huth
2019-08-20 7:47 ` [Qemu-devel] [PULL 2/8] hw/intc: Only build the xlnx-iomod-intc device for the MicroBlaze PMU Thomas Huth
@ 2019-08-20 7:47 ` Thomas Huth
2019-08-20 7:47 ` [Qemu-devel] [PULL 4/8] hw/core: Add a config switch for the "register" device Thomas Huth
` (5 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Thomas Huth @ 2019-08-20 7:47 UTC (permalink / raw)
To: Peter Maydell, qemu-devel; +Cc: philmd
From: Philippe Mathieu-Daudé <philmd@redhat.com>
The xlnx_dpdma device is only used by the ZynqMP AArch64 machine
(not the MicroBlaze PMU). Remove it from the ZynqMP generic objects.
(Note, this entry was duplicated for the AArch64).
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190427141459.19728-4-philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
hw/dma/Makefile.objs | 1 -
1 file changed, 1 deletion(-)
diff --git a/hw/dma/Makefile.objs b/hw/dma/Makefile.objs
index 8b39f9c600..b672e7a522 100644
--- a/hw/dma/Makefile.objs
+++ b/hw/dma/Makefile.objs
@@ -8,7 +8,6 @@ common-obj-$(CONFIG_XILINX_AXI) += xilinx_axidma.o
common-obj-$(CONFIG_ZYNQ_DEVCFG) += xlnx-zynq-devcfg.o
common-obj-$(CONFIG_ETRAXFS) += etraxfs_dma.o
common-obj-$(CONFIG_STP2000) += sparc32_dma.o
-obj-$(CONFIG_XLNX_ZYNQMP) += xlnx_dpdma.o
obj-$(CONFIG_XLNX_ZYNQMP_ARM) += xlnx_dpdma.o
common-obj-$(CONFIG_XLNX_ZYNQMP_ARM) += xlnx-zdma.o
--
2.18.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [Qemu-devel] [PULL 4/8] hw/core: Add a config switch for the "register" device
2019-08-20 7:47 [Qemu-devel] [PULL 0/8] Improvements for the Kconfig switches and Makefiles Thomas Huth
` (2 preceding siblings ...)
2019-08-20 7:47 ` [Qemu-devel] [PULL 3/8] hw/dma: Do not build the xlnx_dpdma device for the MicroBlaze machines Thomas Huth
@ 2019-08-20 7:47 ` Thomas Huth
2019-08-20 7:47 ` [Qemu-devel] [PULL 5/8] hw/core: Add a config switch for the "or-irq" device Thomas Huth
` (4 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Thomas Huth @ 2019-08-20 7:47 UTC (permalink / raw)
To: Peter Maydell, qemu-devel; +Cc: philmd
The "register" device is only used by certain machines. Let's add
a proper config switch for it so that it only gets compiled when we
really need it.
Message-Id: <20190817101931.28386-5-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
hw/Kconfig | 1 +
hw/core/Kconfig | 3 +++
hw/core/Makefile.objs | 2 +-
hw/dma/Kconfig | 1 +
4 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/hw/Kconfig b/hw/Kconfig
index dbae1c0852..b45db3c813 100644
--- a/hw/Kconfig
+++ b/hw/Kconfig
@@ -76,3 +76,4 @@ config XILINX_AXI
config XLNX_ZYNQMP
bool
+ select REGISTER
diff --git a/hw/core/Kconfig b/hw/core/Kconfig
index c2a1ae8122..d11920fcb3 100644
--- a/hw/core/Kconfig
+++ b/hw/core/Kconfig
@@ -9,3 +9,6 @@ config FITLOADER
config PLATFORM_BUS
bool
+
+config REGISTER
+ bool
diff --git a/hw/core/Makefile.objs b/hw/core/Makefile.objs
index f8481d959f..d6cfb2a81b 100644
--- a/hw/core/Makefile.objs
+++ b/hw/core/Makefile.objs
@@ -17,7 +17,7 @@ common-obj-$(CONFIG_SOFTMMU) += machine.o
common-obj-$(CONFIG_SOFTMMU) += loader.o
common-obj-$(CONFIG_FITLOADER) += loader-fit.o
common-obj-$(CONFIG_SOFTMMU) += qdev-properties-system.o
-common-obj-$(CONFIG_SOFTMMU) += register.o
+common-obj-$(CONFIG_REGISTER) += register.o
common-obj-$(CONFIG_SOFTMMU) += or-irq.o
common-obj-$(CONFIG_SOFTMMU) += split-irq.o
common-obj-$(CONFIG_PLATFORM_BUS) += platform-bus.o
diff --git a/hw/dma/Kconfig b/hw/dma/Kconfig
index 751dec5426..5c61b67bc0 100644
--- a/hw/dma/Kconfig
+++ b/hw/dma/Kconfig
@@ -16,6 +16,7 @@ config I8257
config ZYNQ_DEVCFG
bool
+ select REGISTER
config STP2000
bool
--
2.18.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [Qemu-devel] [PULL 5/8] hw/core: Add a config switch for the "or-irq" device
2019-08-20 7:47 [Qemu-devel] [PULL 0/8] Improvements for the Kconfig switches and Makefiles Thomas Huth
` (3 preceding siblings ...)
2019-08-20 7:47 ` [Qemu-devel] [PULL 4/8] hw/core: Add a config switch for the "register" device Thomas Huth
@ 2019-08-20 7:47 ` Thomas Huth
2019-08-20 7:47 ` [Qemu-devel] [PULL 6/8] hw/core: Add a config switch for the "split-irq" device Thomas Huth
` (3 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Thomas Huth @ 2019-08-20 7:47 UTC (permalink / raw)
To: Peter Maydell, qemu-devel; +Cc: philmd
The "or-irq" device is only used by certain machines. Let's add
a proper config switch for it so that it only gets compiled when we
really need it.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190817101931.28386-6-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
hw/arm/Kconfig | 3 +++
hw/core/Kconfig | 3 +++
hw/core/Makefile.objs | 2 +-
hw/pci-host/Kconfig | 3 ++-
4 files changed, 9 insertions(+), 2 deletions(-)
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index ab65ecd216..849195c3f6 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -292,6 +292,7 @@ config RASPI
config STM32F205_SOC
bool
select ARM_V7M
+ select OR_IRQ
select STM32F2XX_TIMER
select STM32F2XX_USART
select STM32F2XX_SYSCFG
@@ -360,6 +361,7 @@ config MPS2
select LAN9118
select MPS2_FPGAIO
select MPS2_SCC
+ select OR_IRQ
select PL022 # Serial port
select PL080 # DMA controller
@@ -439,6 +441,7 @@ config ARMSSE
select IOTKIT_SECCTL
select IOTKIT_SYSCTL
select IOTKIT_SYSINFO
+ select OR_IRQ
select TZ_MPC
select TZ_MSC
select TZ_PPC
diff --git a/hw/core/Kconfig b/hw/core/Kconfig
index d11920fcb3..984143456a 100644
--- a/hw/core/Kconfig
+++ b/hw/core/Kconfig
@@ -7,6 +7,9 @@ config PTIMER
config FITLOADER
bool
+config OR_IRQ
+ bool
+
config PLATFORM_BUS
bool
diff --git a/hw/core/Makefile.objs b/hw/core/Makefile.objs
index d6cfb2a81b..ce337bd7c9 100644
--- a/hw/core/Makefile.objs
+++ b/hw/core/Makefile.objs
@@ -18,7 +18,7 @@ common-obj-$(CONFIG_SOFTMMU) += loader.o
common-obj-$(CONFIG_FITLOADER) += loader-fit.o
common-obj-$(CONFIG_SOFTMMU) += qdev-properties-system.o
common-obj-$(CONFIG_REGISTER) += register.o
-common-obj-$(CONFIG_SOFTMMU) += or-irq.o
+common-obj-$(CONFIG_OR_IRQ) += or-irq.o
common-obj-$(CONFIG_SOFTMMU) += split-irq.o
common-obj-$(CONFIG_PLATFORM_BUS) += platform-bus.o
common-obj-$(CONFIG_SOFTMMU) += generic-loader.o
diff --git a/hw/pci-host/Kconfig b/hw/pci-host/Kconfig
index 8c16d96b3f..1edc1a31d4 100644
--- a/hw/pci-host/Kconfig
+++ b/hw/pci-host/Kconfig
@@ -2,8 +2,9 @@ config PAM
bool
config PREP_PCI
- select PCI
bool
+ select PCI
+ select OR_IRQ
config GRACKLE_PCI
select PCI
--
2.18.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [Qemu-devel] [PULL 6/8] hw/core: Add a config switch for the "split-irq" device
2019-08-20 7:47 [Qemu-devel] [PULL 0/8] Improvements for the Kconfig switches and Makefiles Thomas Huth
` (4 preceding siblings ...)
2019-08-20 7:47 ` [Qemu-devel] [PULL 5/8] hw/core: Add a config switch for the "or-irq" device Thomas Huth
@ 2019-08-20 7:47 ` Thomas Huth
2019-08-20 7:47 ` [Qemu-devel] [PULL 7/8] hw/misc: Add a config switch for the "unimplemented" device Thomas Huth
` (2 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Thomas Huth @ 2019-08-20 7:47 UTC (permalink / raw)
To: Peter Maydell, qemu-devel; +Cc: philmd
The "split-irq" device is currently only used by machines that use
CONFIG_ARMSSE. Let's add a proper CONFIG_SPLIT_IRQ switch for this
so that it only gets compiled when we really need it.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190817101931.28386-7-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
hw/arm/Kconfig | 3 +++
hw/core/Kconfig | 3 +++
hw/core/Makefile.objs | 2 +-
3 files changed, 7 insertions(+), 1 deletion(-)
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 849195c3f6..6e24c73b54 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -81,6 +81,7 @@ config MUSCA
select ARMSSE
select PL011
select PL031
+ select SPLIT_IRQ
config MUSICPAL
bool
@@ -364,6 +365,7 @@ config MPS2
select OR_IRQ
select PL022 # Serial port
select PL080 # DMA controller
+ select SPLIT_IRQ
config FSL_IMX7
bool
@@ -442,6 +444,7 @@ config ARMSSE
select IOTKIT_SYSCTL
select IOTKIT_SYSINFO
select OR_IRQ
+ select SPLIT_IRQ
select TZ_MPC
select TZ_MSC
select TZ_PPC
diff --git a/hw/core/Kconfig b/hw/core/Kconfig
index 984143456a..fffb3d62b2 100644
--- a/hw/core/Kconfig
+++ b/hw/core/Kconfig
@@ -15,3 +15,6 @@ config PLATFORM_BUS
config REGISTER
bool
+
+config SPLIT_IRQ
+ bool
diff --git a/hw/core/Makefile.objs b/hw/core/Makefile.objs
index ce337bd7c9..bb1afe422a 100644
--- a/hw/core/Makefile.objs
+++ b/hw/core/Makefile.objs
@@ -19,7 +19,7 @@ common-obj-$(CONFIG_FITLOADER) += loader-fit.o
common-obj-$(CONFIG_SOFTMMU) += qdev-properties-system.o
common-obj-$(CONFIG_REGISTER) += register.o
common-obj-$(CONFIG_OR_IRQ) += or-irq.o
-common-obj-$(CONFIG_SOFTMMU) += split-irq.o
+common-obj-$(CONFIG_SPLIT_IRQ) += split-irq.o
common-obj-$(CONFIG_PLATFORM_BUS) += platform-bus.o
common-obj-$(CONFIG_SOFTMMU) += generic-loader.o
common-obj-$(CONFIG_SOFTMMU) += null-machine.o
--
2.18.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [Qemu-devel] [PULL 7/8] hw/misc: Add a config switch for the "unimplemented" device
2019-08-20 7:47 [Qemu-devel] [PULL 0/8] Improvements for the Kconfig switches and Makefiles Thomas Huth
` (5 preceding siblings ...)
2019-08-20 7:47 ` [Qemu-devel] [PULL 6/8] hw/core: Add a config switch for the "split-irq" device Thomas Huth
@ 2019-08-20 7:47 ` Thomas Huth
2019-08-20 7:47 ` [Qemu-devel] [PULL 8/8] hw/core: Add a config switch for the generic loader device Thomas Huth
2019-08-20 13:54 ` [Qemu-devel] [PULL 0/8] Improvements for the Kconfig switches and Makefiles Peter Maydell
8 siblings, 0 replies; 10+ messages in thread
From: Thomas Huth @ 2019-08-20 7:47 UTC (permalink / raw)
To: Peter Maydell, qemu-devel; +Cc: philmd
The device is only used by some few boards. Let's use a proper Kconfig
switch so that we only compile this code if we really need it.
Message-Id: <20190817101931.28386-8-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
hw/arm/Kconfig | 11 +++++++++++
hw/microblaze/Kconfig | 1 +
hw/misc/Kconfig | 3 +++
hw/misc/Makefile.objs | 2 +-
hw/sparc64/Kconfig | 1 +
5 files changed, 17 insertions(+), 1 deletion(-)
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 6e24c73b54..76a2a6bcbf 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -82,6 +82,7 @@ config MUSCA
select PL011
select PL031
select SPLIT_IRQ
+ select UNIMP
config MUSICPAL
bool
@@ -217,6 +218,7 @@ config STELLARIS
select SSI_SD
select STELLARIS_INPUT
select STELLARIS_ENET # ethernet
+ select UNIMP
config STRONGARM
bool
@@ -283,6 +285,7 @@ config ALLWINNER_A10
select ALLWINNER_A10_PIC
select ALLWINNER_EMAC
select SERIAL
+ select UNIMP
config RASPI
bool
@@ -320,6 +323,7 @@ config XLNX_VERSAL
select PL011
select CADENCE
select VIRTIO_MMIO
+ select UNIMP
config FSL_IMX25
bool
@@ -355,6 +359,7 @@ config ASPEED_SOC
select SSI_M25P80
select TMP105
select TMP421
+ select UNIMP
config MPS2
bool
@@ -366,6 +371,7 @@ config MPS2
select PL022 # Serial port
select PL080 # DMA controller
select SPLIT_IRQ
+ select UNIMP
config FSL_IMX7
bool
@@ -378,6 +384,7 @@ config FSL_IMX7
select IMX_I2C
select PCI_EXPRESS_DESIGNWARE
select SDHCI
+ select UNIMP
config ARM_SMMUV3
bool
@@ -389,6 +396,7 @@ config FSL_IMX6UL
select IMX_FEC
select IMX_I2C
select SDHCI
+ select UNIMP
config MICROBIT
bool
@@ -398,6 +406,7 @@ config NRF51_SOC
bool
select I2C
select ARM_V7M
+ select UNIMP
config EMCRAFT_SF2
bool
@@ -410,6 +419,7 @@ config MSF2
select PTIMER
select SERIAL
select SSI
+ select UNIMP
config ZAURUS
bool
@@ -448,6 +458,7 @@ config ARMSSE
select TZ_MPC
select TZ_MSC
select TZ_PPC
+ select UNIMP
config ARMSSE_CPUID
bool
diff --git a/hw/microblaze/Kconfig b/hw/microblaze/Kconfig
index c4dc120973..e2697ced9c 100644
--- a/hw/microblaze/Kconfig
+++ b/hw/microblaze/Kconfig
@@ -4,6 +4,7 @@ config PETALOGIX_S3ADSP1800
select XILINX
select XILINX_AXI
select XILINX_ETHLITE
+ select UNIMP
config PETALOGIX_ML605
bool
diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig
index 385e1b0cec..51754bb47c 100644
--- a/hw/misc/Kconfig
+++ b/hw/misc/Kconfig
@@ -117,4 +117,7 @@ config AUX
bool
select I2C
+config UNIMP
+ bool
+
source macio/Kconfig
diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs
index e9aab519a1..e4aad707fb 100644
--- a/hw/misc/Makefile.objs
+++ b/hw/misc/Makefile.objs
@@ -9,7 +9,7 @@ common-obj-$(CONFIG_PCI_TESTDEV) += pci-testdev.o
common-obj-$(CONFIG_EDU) += edu.o
common-obj-$(CONFIG_PCA9552) += pca9552.o
-common-obj-y += unimp.o
+common-obj-$(CONFIG_UNIMP) += unimp.o
common-obj-$(CONFIG_FW_CFG_DMA) += vmcoreinfo.o
# ARM devices
diff --git a/hw/sparc64/Kconfig b/hw/sparc64/Kconfig
index d4d76a89be..f9f8b0f73a 100644
--- a/hw/sparc64/Kconfig
+++ b/hw/sparc64/Kconfig
@@ -17,3 +17,4 @@ config NIAGARA
bool
select EMPTY_SLOT
select SUN4V_RTC
+ select UNIMP
--
2.18.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [Qemu-devel] [PULL 8/8] hw/core: Add a config switch for the generic loader device
2019-08-20 7:47 [Qemu-devel] [PULL 0/8] Improvements for the Kconfig switches and Makefiles Thomas Huth
` (6 preceding siblings ...)
2019-08-20 7:47 ` [Qemu-devel] [PULL 7/8] hw/misc: Add a config switch for the "unimplemented" device Thomas Huth
@ 2019-08-20 7:47 ` Thomas Huth
2019-08-20 13:54 ` [Qemu-devel] [PULL 0/8] Improvements for the Kconfig switches and Makefiles Peter Maydell
8 siblings, 0 replies; 10+ messages in thread
From: Thomas Huth @ 2019-08-20 7:47 UTC (permalink / raw)
To: Peter Maydell, qemu-devel; +Cc: philmd
The generic loader device is completely optional. Let's add a proper
config switch for it so that people can disable it if they don't need
it and want to create a minimalistic QEMU binary.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190817101931.28386-9-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
hw/core/Kconfig | 4 ++++
hw/core/Makefile.objs | 2 +-
2 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/hw/core/Kconfig b/hw/core/Kconfig
index fffb3d62b2..fdf03514d7 100644
--- a/hw/core/Kconfig
+++ b/hw/core/Kconfig
@@ -7,6 +7,10 @@ config PTIMER
config FITLOADER
bool
+config GENERIC_LOADER
+ bool
+ default y
+
config OR_IRQ
bool
diff --git a/hw/core/Makefile.objs b/hw/core/Makefile.objs
index bb1afe422a..b49f880a0c 100644
--- a/hw/core/Makefile.objs
+++ b/hw/core/Makefile.objs
@@ -21,7 +21,7 @@ common-obj-$(CONFIG_REGISTER) += register.o
common-obj-$(CONFIG_OR_IRQ) += or-irq.o
common-obj-$(CONFIG_SPLIT_IRQ) += split-irq.o
common-obj-$(CONFIG_PLATFORM_BUS) += platform-bus.o
-common-obj-$(CONFIG_SOFTMMU) += generic-loader.o
+common-obj-$(CONFIG_GENERIC_LOADER) += generic-loader.o
common-obj-$(CONFIG_SOFTMMU) += null-machine.o
obj-$(CONFIG_SOFTMMU) += machine-qmp-cmds.o
--
2.18.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* Re: [Qemu-devel] [PULL 0/8] Improvements for the Kconfig switches and Makefiles
2019-08-20 7:47 [Qemu-devel] [PULL 0/8] Improvements for the Kconfig switches and Makefiles Thomas Huth
` (7 preceding siblings ...)
2019-08-20 7:47 ` [Qemu-devel] [PULL 8/8] hw/core: Add a config switch for the generic loader device Thomas Huth
@ 2019-08-20 13:54 ` Peter Maydell
8 siblings, 0 replies; 10+ messages in thread
From: Peter Maydell @ 2019-08-20 13:54 UTC (permalink / raw)
To: Thomas Huth; +Cc: Philippe Mathieu-Daudé, QEMU Developers
On Tue, 20 Aug 2019 at 08:47, Thomas Huth <thuth@redhat.com> wrote:
>
> Hi Peter,
>
> the following changes since commit 50d69ee0d82378c7c21f482492dacfe0916b4863:
>
> Merge remote-tracking branch 'remotes/stsquad/tags/pull-softfloat-headers-190819-1' into staging (2019-08-19 15:58:01 +0100)
>
> are available in the Git repository at:
>
> https://gitlab.com/huth/qemu.git tags/pull-request-2019-08-20
>
> for you to fetch changes up to f874d7293589ab42bf5da0c03c9048e5d11c292f:
>
> hw/core: Add a config switch for the generic loader device (2019-08-20 09:11:17 +0200)
>
> ----------------------------------------------------------------
> * Improvements for the Kconfig switches and Makefiles
> ----------------------------------------------------------------
Applied, thanks.
Please update the changelog at https://wiki.qemu.org/ChangeLog/4.2
for any user-visible changes.
-- PMM
^ permalink raw reply [flat|nested] 10+ messages in thread