From: Igor Mammedov <imammedo@redhat.com>
To: Cornelia Huck <cohuck@redhat.com>
Cc: thuth@redhat.com, david@redhat.com, qemu-devel@nongnu.org,
borntraeger@de.ibm.com, qemu-s390x@nongnu.org,
pbonzini@redhat.com
Subject: Re: [Qemu-devel] [PATCH for-4.2 v5 1/2] kvm: s390: split too big memory section on several memslots
Date: Tue, 27 Aug 2019 14:56:29 +0200 [thread overview]
Message-ID: <20190827145629.62c5839e@redhat.com> (raw)
In-Reply-To: <20190820180727.32cf4891.cohuck@redhat.com>
On Tue, 20 Aug 2019 18:07:27 +0200
Cornelia Huck <cohuck@redhat.com> wrote:
> On Wed, 7 Aug 2019 11:32:41 -0400
> Igor Mammedov <imammedo@redhat.com> wrote:
>
> > Max memslot size supported by kvm on s390 is 8Tb,
> > move logic of splitting RAM in chunks upto 8T to KVM code.
> >
> > This way it will hide KVM specific restrictions in KVM code
> > and won't affect baord level design decisions. Which would allow
> > us to avoid misusing memory_region_allocate_system_memory() API
> > and eventually use a single hostmem backend for guest RAM.
> >
> > Signed-off-by: Igor Mammedov <imammedo@redhat.com>
> > ---
> > v5:
> > * move computation 'size -= slot_size' inside of loop body
> > (David Hildenbrand <david@redhat.com>)
> > v4:
> > * fix compilation issue
> > (Christian Borntraeger <borntraeger@de.ibm.com>)
> > * advance HVA along with GPA in kvm_set_phys_mem()
> > (Christian Borntraeger <borntraeger@de.ibm.com>)
> >
> > patch prepares only KVM side for switching to single RAM memory region
> > another patch will take care of dropping manual RAM partitioning in
> > s390 code.
>
> I may have lost track a bit -- what is the status of this patch (and
> the series)?
Christian,
could you test it on a host that have sufficient amount of RAM?
PS:
I've only simulated test on smaller host with KVM enabled
(by reducing KVM_SLOT_MAX_BYTES size) to verify that KVM code splits
RAM on smaller chunks.
PS2:
Also considering we decided to drop migration concerns there
is no need to check migration on a large enough host anymore.
>
> > ---
> > include/sysemu/kvm_int.h | 1 +
> > accel/kvm/kvm-all.c | 82 ++++++++++++++++++++++++--------------
> > hw/s390x/s390-virtio-ccw.c | 9 -----
> > target/s390x/kvm.c | 12 ++++++
> > 4 files changed, 64 insertions(+), 40 deletions(-)
> >
> > diff --git a/include/sysemu/kvm_int.h b/include/sysemu/kvm_int.h
> > index 31df465fdc..7f7520bce2 100644
> > --- a/include/sysemu/kvm_int.h
> > +++ b/include/sysemu/kvm_int.h
> > @@ -41,4 +41,5 @@ typedef struct KVMMemoryListener {
> > void kvm_memory_listener_register(KVMState *s, KVMMemoryListener *kml,
> > AddressSpace *as, int as_id);
> >
> > +void kvm_set_max_memslot_size(hwaddr max_slot_size);
> > #endif
> > diff --git a/accel/kvm/kvm-all.c b/accel/kvm/kvm-all.c
> > index f450f25295..8153556335 100644
> > --- a/accel/kvm/kvm-all.c
> > +++ b/accel/kvm/kvm-all.c
> > @@ -138,6 +138,7 @@ bool kvm_direct_msi_allowed;
> > bool kvm_ioeventfd_any_length_allowed;
> > bool kvm_msi_use_devid;
> > static bool kvm_immediate_exit;
> > +static hwaddr kvm_max_slot_size = ~0;
> >
> > static const KVMCapabilityInfo kvm_required_capabilites[] = {
> > KVM_CAP_INFO(USER_MEMORY),
> > @@ -951,6 +952,14 @@ kvm_check_extension_list(KVMState *s, const KVMCapabilityInfo *list)
> > return NULL;
> > }
> >
> > +void kvm_set_max_memslot_size(hwaddr max_slot_size)
> > +{
> > + g_assert(
> > + ROUND_UP(max_slot_size, qemu_real_host_page_size) == max_slot_size
> > + );
> > + kvm_max_slot_size = max_slot_size;
> > +}
> > +
> > static void kvm_set_phys_mem(KVMMemoryListener *kml,
> > MemoryRegionSection *section, bool add)
> > {
> > @@ -958,7 +967,7 @@ static void kvm_set_phys_mem(KVMMemoryListener *kml,
> > int err;
> > MemoryRegion *mr = section->mr;
> > bool writeable = !mr->readonly && !mr->rom_device;
> > - hwaddr start_addr, size;
> > + hwaddr start_addr, size, slot_size;
> > void *ram;
> >
> > if (!memory_region_is_ram(mr)) {
> > @@ -983,41 +992,52 @@ static void kvm_set_phys_mem(KVMMemoryListener *kml,
> > kvm_slots_lock(kml);
> >
> > if (!add) {
> > - mem = kvm_lookup_matching_slot(kml, start_addr, size);
> > - if (!mem) {
> > - goto out;
> > - }
> > - if (mem->flags & KVM_MEM_LOG_DIRTY_PAGES) {
> > - kvm_physical_sync_dirty_bitmap(kml, section);
> > - }
> > + do {
> > + slot_size = kvm_max_slot_size < size ? kvm_max_slot_size : size;
> > + mem = kvm_lookup_matching_slot(kml, start_addr, slot_size);
> > + if (!mem) {
> > + goto out;
> > + }
> > + if (mem->flags & KVM_MEM_LOG_DIRTY_PAGES) {
> > + kvm_physical_sync_dirty_bitmap(kml, section);
> > + }
> >
> > - /* unregister the slot */
> > - g_free(mem->dirty_bmap);
> > - mem->dirty_bmap = NULL;
> > - mem->memory_size = 0;
> > - mem->flags = 0;
> > - err = kvm_set_user_memory_region(kml, mem, false);
> > - if (err) {
> > - fprintf(stderr, "%s: error unregistering slot: %s\n",
> > - __func__, strerror(-err));
> > - abort();
> > - }
> > + /* unregister the slot */
> > + g_free(mem->dirty_bmap);
> > + mem->dirty_bmap = NULL;
> > + mem->memory_size = 0;
> > + mem->flags = 0;
> > + err = kvm_set_user_memory_region(kml, mem, false);
> > + if (err) {
> > + fprintf(stderr, "%s: error unregistering slot: %s\n",
> > + __func__, strerror(-err));
> > + abort();
> > + }
> > + start_addr += slot_size;
> > + size -= slot_size;
> > + } while (size);
> > goto out;
> > }
> >
> > /* register the new slot */
> > - mem = kvm_alloc_slot(kml);
> > - mem->memory_size = size;
> > - mem->start_addr = start_addr;
> > - mem->ram = ram;
> > - mem->flags = kvm_mem_flags(mr);
> > -
> > - err = kvm_set_user_memory_region(kml, mem, true);
> > - if (err) {
> > - fprintf(stderr, "%s: error registering slot: %s\n", __func__,
> > - strerror(-err));
> > - abort();
> > - }
> > + do {
> > + slot_size = kvm_max_slot_size < size ? kvm_max_slot_size : size;
> > + mem = kvm_alloc_slot(kml);
> > + mem->memory_size = slot_size;
> > + mem->start_addr = start_addr;
> > + mem->ram = ram;
> > + mem->flags = kvm_mem_flags(mr);
> > +
> > + err = kvm_set_user_memory_region(kml, mem, true);
> > + if (err) {
> > + fprintf(stderr, "%s: error registering slot: %s\n", __func__,
> > + strerror(-err));
> > + abort();
> > + }
> > + start_addr += slot_size;
> > + ram += slot_size;
> > + size -= slot_size;
> > + } while (size);
> >
> > out:
> > kvm_slots_unlock(kml);
> > diff --git a/hw/s390x/s390-virtio-ccw.c b/hw/s390x/s390-virtio-ccw.c
> > index 5b6a9a4e55..0c03ffb7c7 100644
> > --- a/hw/s390x/s390-virtio-ccw.c
> > +++ b/hw/s390x/s390-virtio-ccw.c
> > @@ -151,15 +151,6 @@ static void virtio_ccw_register_hcalls(void)
> > virtio_ccw_hcall_early_printk);
> > }
> >
> > -/*
> > - * KVM does only support memory slots up to KVM_MEM_MAX_NR_PAGES pages
> > - * as the dirty bitmap must be managed by bitops that take an int as
> > - * position indicator. If we have a guest beyond that we will split off
> > - * new subregions. The split must happen on a segment boundary (1MB).
> > - */
> > -#define KVM_MEM_MAX_NR_PAGES ((1ULL << 31) - 1)
> > -#define SEG_MSK (~0xfffffULL)
> > -#define KVM_SLOT_MAX_BYTES ((KVM_MEM_MAX_NR_PAGES * TARGET_PAGE_SIZE) & SEG_MSK)
> > static void s390_memory_init(ram_addr_t mem_size)
> > {
> > MemoryRegion *sysmem = get_system_memory();
> > diff --git a/target/s390x/kvm.c b/target/s390x/kvm.c
> > index 6e814c230b..6b1428a760 100644
> > --- a/target/s390x/kvm.c
> > +++ b/target/s390x/kvm.c
> > @@ -28,6 +28,7 @@
> > #include "cpu.h"
> > #include "internal.h"
> > #include "kvm_s390x.h"
> > +#include "sysemu/kvm_int.h"
> > #include "qapi/error.h"
> > #include "qemu/error-report.h"
> > #include "qemu/timer.h"
> > @@ -122,6 +123,16 @@
> > #define VCPU_IRQ_BUF_SIZE(max_cpus) (sizeof(struct kvm_s390_irq) * \
> > (max_cpus + NR_LOCAL_IRQS))
> >
> > +/*
> > + * KVM does only support memory slots up to KVM_MEM_MAX_NR_PAGES pages
> > + * as the dirty bitmap must be managed by bitops that take an int as
> > + * position indicator. If we have a guest beyond that we will split off
> > + * new subregions. The split must happen on a segment boundary (1MB).
> > + */
> > +#define KVM_MEM_MAX_NR_PAGES ((1ULL << 31) - 1)
> > +#define SEG_MSK (~0xfffffULL)
> > +#define KVM_SLOT_MAX_BYTES ((KVM_MEM_MAX_NR_PAGES * TARGET_PAGE_SIZE) & SEG_MSK)
> > +
> > static CPUWatchpoint hw_watchpoint;
> > /*
> > * We don't use a list because this structure is also used to transmit the
> > @@ -347,6 +358,7 @@ int kvm_arch_init(MachineState *ms, KVMState *s)
> > */
> > /* kvm_vm_enable_cap(s, KVM_CAP_S390_AIS, 0); */
> >
> > + kvm_set_max_memslot_size(KVM_SLOT_MAX_BYTES);
> > return 0;
> > }
> >
>
next prev parent reply other threads:[~2019-08-27 12:57 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-06 9:48 [Qemu-devel] [PATCH for-4.2 v4 0/2] s390: stop abusing memory_region_allocate_system_memory() Igor Mammedov
2019-08-06 9:48 ` [Qemu-devel] [PATCH for-4.2 v4 1/2] kvm: s390: split too big memory section on several memslots Igor Mammedov
2019-08-07 7:54 ` [Qemu-devel] [qemu-s390x] " David Hildenbrand
2019-08-07 9:55 ` Igor Mammedov
2019-08-07 10:20 ` David Hildenbrand
2019-08-07 15:32 ` [Qemu-devel] [PATCH for-4.2 v5 " Igor Mammedov
2019-08-20 16:07 ` Cornelia Huck
2019-08-27 12:56 ` Igor Mammedov [this message]
2019-08-29 6:47 ` Christian Borntraeger
2019-08-29 12:04 ` Igor Mammedov
2019-08-29 12:07 ` [Qemu-devel] [qemu-s390x] " Christian Borntraeger
2019-08-29 12:31 ` Igor Mammedov
2019-08-29 12:41 ` Christian Borntraeger
2019-08-30 9:41 ` Igor Mammedov
2019-08-30 16:19 ` Christian Borntraeger
2019-09-02 13:49 ` Igor Mammedov
2019-09-03 6:57 ` Christian Borntraeger
2019-09-16 13:16 ` Igor Mammedov
2019-08-06 9:48 ` [Qemu-devel] [PATCH for-4.2 v4 2/2] s390: do not call memory_region_allocate_system_memory() multiple times Igor Mammedov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190827145629.62c5839e@redhat.com \
--to=imammedo@redhat.com \
--cc=borntraeger@de.ibm.com \
--cc=cohuck@redhat.com \
--cc=david@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-s390x@nongnu.org \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).