qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Igor Mammedov <imammedo@redhat.com>
To: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Cc: peter.maydell@linaro.org, sameo@linux.intel.com,
	shannon.zhaosl@gmail.com, ard.biesheuvel@linaro.org,
	qemu-devel@nongnu.org, xuwei5@hisilicon.com, linuxarm@huawei.com,
	eric.auger@redhat.com, qemu-arm@nongnu.org,
	sebastien.boeuf@intel.com, lersek@redhat.com
Subject: Re: [Qemu-devel] [PATCH-for-4.2 v10 01/11] hw/acpi: Make ACPI IO address space configurable
Date: Wed, 4 Sep 2019 13:27:59 +0200	[thread overview]
Message-ID: <20190904132759.2663148a@redhat.com> (raw)
In-Reply-To: <20190904085629.13872-2-shameerali.kolothum.thodi@huawei.com>

On Wed, 4 Sep 2019 09:56:19 +0100
Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> wrote:

> This is in preparation for adding support for ARM64 platforms
> where it doesn't use port mapped IO for ACPI IO space. We are
> making changes so that MMIO region can be accommodated
> and board can pass the base address into the aml build function.
> 
> Also move few MEMORY_* definitions to header so that other memory
> hotplug event signalling mechanisms (eg. Generic Event Device on
> HW-reduced acpi platforms) can use the same from their respective
> event handler code.
> 
> Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
> Reviewed-by: Eric Auger <eric.auger@redhat.com>

Reviewed-by: Igor Mammedov <imammedo@redhat.com>

> ---
> v9 --> v10
>   - Fixed "make check" failure on x86_64.
> 
> v8 --> v9
>   -base address is an input into build_memory_hotplug_aml()
>   -Removed R-by tags from Igor and Eric for now.
> ---
>  hw/acpi/memory_hotplug.c         | 33 ++++++++++++++------------------
>  hw/i386/acpi-build.c             |  7 ++++++-
>  hw/i386/pc.c                     |  3 +++
>  include/hw/acpi/memory_hotplug.h |  9 +++++++--
>  include/hw/i386/pc.h             |  3 +++
>  5 files changed, 33 insertions(+), 22 deletions(-)
> 
> diff --git a/hw/acpi/memory_hotplug.c b/hw/acpi/memory_hotplug.c
> index 9483d66e86..9b0b150f4f 100644
> --- a/hw/acpi/memory_hotplug.c
> +++ b/hw/acpi/memory_hotplug.c
> @@ -30,12 +30,7 @@
>  #define MEMORY_SLOT_PROXIMITY_METHOD "MPXM"
>  #define MEMORY_SLOT_EJECT_METHOD     "MEJ0"
>  #define MEMORY_SLOT_NOTIFY_METHOD    "MTFY"
> -#define MEMORY_SLOT_SCAN_METHOD      "MSCN"
>  #define MEMORY_HOTPLUG_DEVICE        "MHPD"
> -#define MEMORY_HOTPLUG_IO_LEN         24
> -#define MEMORY_DEVICES_CONTAINER     "\\_SB.MHPC"
> -
> -static uint16_t memhp_io_base;
>  
>  static ACPIOSTInfo *acpi_memory_device_status(int slot, MemStatus *mdev)
>  {
> @@ -210,7 +205,7 @@ static const MemoryRegionOps acpi_memory_hotplug_ops = {
>  };
>  
>  void acpi_memory_hotplug_init(MemoryRegion *as, Object *owner,
> -                              MemHotplugState *state, uint16_t io_base)
> +                              MemHotplugState *state, hwaddr io_base)
>  {
>      MachineState *machine = MACHINE(qdev_get_machine());
>  
> @@ -219,12 +214,10 @@ void acpi_memory_hotplug_init(MemoryRegion *as, Object *owner,
>          return;
>      }
>  
> -    assert(!memhp_io_base);
> -    memhp_io_base = io_base;
>      state->devs = g_malloc0(sizeof(*state->devs) * state->dev_count);
>      memory_region_init_io(&state->io, owner, &acpi_memory_hotplug_ops, state,
>                            "acpi-mem-hotplug", MEMORY_HOTPLUG_IO_LEN);
> -    memory_region_add_subregion(as, memhp_io_base, &state->io);
> +    memory_region_add_subregion(as, io_base, &state->io);
>  }
>  
>  /**
> @@ -343,7 +336,8 @@ const VMStateDescription vmstate_memory_hotplug = {
>  
>  void build_memory_hotplug_aml(Aml *table, uint32_t nr_mem,
>                                const char *res_root,
> -                              const char *event_handler_method)
> +                              const char *event_handler_method,
> +                              AmlRegionSpace rs, hwaddr memhp_io_base)
>  {
>      int i;
>      Aml *ifctx;
> @@ -352,10 +346,6 @@ void build_memory_hotplug_aml(Aml *table, uint32_t nr_mem,
>      Aml *mem_ctrl_dev;
>      char *mhp_res_path;
>  
> -    if (!memhp_io_base) {
> -        return;
> -    }
> -
>      mhp_res_path = g_strdup_printf("%s." MEMORY_HOTPLUG_DEVICE, res_root);
>      mem_ctrl_dev = aml_device("%s", mhp_res_path);
>      {
> @@ -366,14 +356,19 @@ void build_memory_hotplug_aml(Aml *table, uint32_t nr_mem,
>              aml_name_decl("_UID", aml_string("Memory hotplug resources")));
>  
>          crs = aml_resource_template();
> -        aml_append(crs,
> -            aml_io(AML_DECODE16, memhp_io_base, memhp_io_base, 0,
> -                   MEMORY_HOTPLUG_IO_LEN)
> -        );
> +        if (rs == AML_SYSTEM_IO) {
> +            aml_append(crs,
> +                aml_io(AML_DECODE16, memhp_io_base, memhp_io_base, 0,
> +                       MEMORY_HOTPLUG_IO_LEN)
> +            );
> +        } else {
> +            aml_append(crs, aml_memory32_fixed(memhp_io_base,
> +                            MEMORY_HOTPLUG_IO_LEN, AML_READ_WRITE));
> +        }
>          aml_append(mem_ctrl_dev, aml_name_decl("_CRS", crs));
>  
>          aml_append(mem_ctrl_dev, aml_operation_region(
> -            MEMORY_HOTPLUG_IO_REGION, AML_SYSTEM_IO,
> +            MEMORY_HOTPLUG_IO_REGION, rs,
>              aml_int(memhp_io_base), MEMORY_HOTPLUG_IO_LEN)
>          );
>  
> diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
> index 034e413fd0..0d97cc701d 100644
> --- a/hw/i386/acpi-build.c
> +++ b/hw/i386/acpi-build.c
> @@ -1873,7 +1873,12 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
>          build_cpus_aml(dsdt, machine, opts, pm->cpu_hp_io_base,
>                         "\\_SB.PCI0", "\\_GPE._E02");
>      }
> -    build_memory_hotplug_aml(dsdt, nr_mem, "\\_SB.PCI0", "\\_GPE._E03");
> +
> +    if (pcms->memhp_io_base && nr_mem) {
> +        build_memory_hotplug_aml(dsdt, nr_mem, "\\_SB.PCI0",
> +                                 "\\_GPE._E03", AML_SYSTEM_IO,
> +                                 pcms->memhp_io_base);
> +    }
>  
>      scope =  aml_scope("_GPE");
>      {
> diff --git a/hw/i386/pc.c b/hw/i386/pc.c
> index c14ed86439..b38cd07231 100644
> --- a/hw/i386/pc.c
> +++ b/hw/i386/pc.c
> @@ -1951,6 +1951,9 @@ void pc_memory_init(PCMachineState *pcms,
>  
>      /* Init default IOAPIC address space */
>      pcms->ioapic_as = &address_space_memory;
> +
> +    /* Init ACPI memory hotplug IO base address */
> +    pcms->memhp_io_base = ACPI_MEMORY_HOTPLUG_BASE;
>  }
>  
>  /*
> diff --git a/include/hw/acpi/memory_hotplug.h b/include/hw/acpi/memory_hotplug.h
> index 77c65765d6..dfe9cf3fde 100644
> --- a/include/hw/acpi/memory_hotplug.h
> +++ b/include/hw/acpi/memory_hotplug.h
> @@ -5,6 +5,10 @@
>  #include "hw/acpi/acpi.h"
>  #include "hw/acpi/aml-build.h"
>  
> +#define MEMORY_SLOT_SCAN_METHOD      "MSCN"
> +#define MEMORY_DEVICES_CONTAINER     "\\_SB.MHPC"
> +#define MEMORY_HOTPLUG_IO_LEN         24
> +
>  /**
>   * MemStatus:
>   * @is_removing: the memory device in slot has been requested to be ejected.
> @@ -29,7 +33,7 @@ typedef struct MemHotplugState {
>  } MemHotplugState;
>  
>  void acpi_memory_hotplug_init(MemoryRegion *as, Object *owner,
> -                              MemHotplugState *state, uint16_t io_base);
> +                              MemHotplugState *state, hwaddr io_base);
>  
>  void acpi_memory_plug_cb(HotplugHandler *hotplug_dev, MemHotplugState *mem_st,
>                           DeviceState *dev, Error **errp);
> @@ -48,5 +52,6 @@ void acpi_memory_ospm_status(MemHotplugState *mem_st, ACPIOSTInfoList ***list);
>  
>  void build_memory_hotplug_aml(Aml *table, uint32_t nr_mem,
>                                const char *res_root,
> -                              const char *event_handler_method);
> +                              const char *event_handler_method,
> +                              AmlRegionSpace rs, hwaddr memhp_io_base);
>  #endif
> diff --git a/include/hw/i386/pc.h b/include/hw/i386/pc.h
> index 19a837889d..ac09e42030 100644
> --- a/include/hw/i386/pc.h
> +++ b/include/hw/i386/pc.h
> @@ -69,6 +69,9 @@ struct PCMachineState {
>      /* Address space used by IOAPIC device. All IOAPIC interrupts
>       * will be translated to MSI messages in the address space. */
>      AddressSpace *ioapic_as;
> +
> +    /* ACPI Memory hotplug IO base address */
> +    hwaddr memhp_io_base;
>  };
>  
>  #define PC_MACHINE_ACPI_DEVICE_PROP "acpi-device"



  reply	other threads:[~2019-09-04 11:29 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-04  8:56 [Qemu-devel] [PATCH-for-4.2 v10 00/11] ARM virt: ACPI memory hotplug support Shameer Kolothum
2019-09-04  8:56 ` [Qemu-devel] [PATCH-for-4.2 v10 01/11] hw/acpi: Make ACPI IO address space configurable Shameer Kolothum
2019-09-04 11:27   ` Igor Mammedov [this message]
2019-09-04  8:56 ` [Qemu-devel] [PATCH-for-4.2 v10 02/11] hw/acpi: Do not create memory hotplug method when handler is not defined Shameer Kolothum
2019-09-04  8:56 ` [Qemu-devel] [PATCH-for-4.2 v10 03/11] hw/acpi: Add ACPI Generic Event Device Support Shameer Kolothum
2019-09-11 12:34   ` Igor Mammedov
2019-09-04  8:56 ` [Qemu-devel] [PATCH-for-4.2 v10 04/11] hw/arm/virt: Add memory hotplug framework Shameer Kolothum
2019-09-04  8:56 ` [Qemu-devel] [PATCH-for-4.2 v10 05/11] hw/arm/virt: Enable device memory cold/hot plug with ACPI boot Shameer Kolothum
2019-09-11 12:48   ` Igor Mammedov
2019-09-11 13:07   ` Igor Mammedov
2019-09-16 10:30     ` Shameerali Kolothum Thodi
2019-09-17 15:25       ` Igor Mammedov
2019-09-04  8:56 ` [Qemu-devel] [PATCH-for-4.2 v10 06/11] hw/arm/virt-acpi-build: Add PC-DIMM in SRAT Shameer Kolothum
2019-09-11 13:14   ` Igor Mammedov
2019-09-04  8:56 ` [Qemu-devel] [PATCH-for-4.2 v10 07/11] hw/arm: Factor out powerdown notifier from GPIO Shameer Kolothum
2019-09-11 13:08   ` Igor Mammedov
2019-09-04  8:56 ` [Qemu-devel] [PATCH-for-4.2 v10 08/11] hw/arm: Use GED for system_powerdown event Shameer Kolothum
2019-09-11 13:20   ` Igor Mammedov
2019-09-04  8:56 ` [Qemu-devel] [PATCH-for-4.2 v10 09/11] docs/specs: Add ACPI GED documentation Shameer Kolothum
2019-09-11 12:54   ` Peter Maydell
2019-09-04  8:56 ` [Qemu-devel] [PATCH-for-4.2 v10 10/11] tests: add dummy ACPI tables for arm/virt board Shameer Kolothum
2019-09-11 12:57   ` Peter Maydell
2019-09-11 13:50     ` Igor Mammedov
2019-09-11 13:55       ` Michael S. Tsirkin
2019-09-11 14:33         ` Shameerali Kolothum Thodi
2019-09-17 15:11         ` Michael S. Tsirkin
2019-09-17 15:23           ` Peter Maydell
2019-09-04  8:56 ` [Qemu-devel] [PATCH-for-4.2 v10 11/11] tests: Add bios tests to arm/virt Shameer Kolothum
2019-09-11 13:46   ` Igor Mammedov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190904132759.2663148a@redhat.com \
    --to=imammedo@redhat.com \
    --cc=ard.biesheuvel@linaro.org \
    --cc=eric.auger@redhat.com \
    --cc=lersek@redhat.com \
    --cc=linuxarm@huawei.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=sameo@linux.intel.com \
    --cc=sebastien.boeuf@intel.com \
    --cc=shameerali.kolothum.thodi@huawei.com \
    --cc=shannon.zhaosl@gmail.com \
    --cc=xuwei5@hisilicon.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).