From: "Alex Bennée" <alex.bennee@linaro.org>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, qemu-arm@nongnu.org,
"Alex Bennée" <alex.bennee@linaro.org>
Subject: [PATCH v2 00/16] testing/next (docker/podman, tcg, build fixes)
Date: Thu, 19 Sep 2019 18:09:59 +0100 [thread overview]
Message-ID: <20190919171015.12681-1-alex.bennee@linaro.org> (raw)
Hi,
This is the current status of the testing/next queue. It contains a
number of fixes for docker and podman as well as some additional tests
for floating point under TCG I've been experimenting with. With this
iteration I've also added some documentation for the check-tcg
command.
Since v1 there are some additional docker targets for WHPX builds from
Phillipe and a couple of fixes from me to try and get the CI back to
green. There is still an instability that I think was introduced in
the last set of migration patches which is making Travis very unstable
with lots of cancelled builds due to no output. David and I have been
able to replicate slow migration tests which may be the cause but as
of yet we don't have a fix.
As usual notes for individual fixes bellow the --- in the individual
patches.
The following patches need review
04 - tests docker reduce scary warnings from failed in
08 - tests tcg re enable linux test for ppc64abi32
09 - tests tcg add float_madds test to multiarch
10 - tests tcg add generic version of float_convs
11 - tests tcg add simple record replay smoke test for
14 - configure preserve PKG_CONFIG for subdir builds
15 - docs devel add check tcg to testing.rst
16 - Makefile fix up qemu ga.8 paths to take in src bu
Alex Bennée (11):
tests/docker: fix DOCKER_PARTIAL_IMAGES
tests/docker: reduce scary warnings from failed inspect
target/ppc: fix signal delivery for ppc64abi32
tests/tcg: clean-up some comments after the de-tangling
tests/tcg: re-enable linux-test for ppc64abi32
tests/tcg: add float_madds test to multiarch
tests/tcg: add generic version of float_convs
tests/tcg: add simple record/replay smoke test for aarch64
configure: preserve PKG_CONFIG for subdir builds
docs/devel: add "check-tcg" to testing.rst
Makefile: fix-up qemu-ga.8 paths to take in-src builds into account
John Snow (3):
tests/docker: add sanitizers back to clang build
tests/docker: remove python2.7 from docker9-mxe
podman: fix command invocation
Philippe Mathieu-Daudé (2):
tests/docker: Add fedora-win10sdk-cross image
.shippable.yml: Build WHPX enabled binaries
.shippable.yml | 2 +
Makefile | 32 +-
configure | 1 +
docs/devel/testing.rst | 62 ++
linux-user/ppc/signal.c | 4 +-
tests/docker/Makefile.include | 3 +-
tests/docker/docker.py | 34 +-
tests/docker/dockerfiles/debian9-mxe.docker | 3 +-
.../dockerfiles/fedora-win10sdk-cross.docker | 21 +
tests/docker/test-clang | 6 +-
tests/tcg/Makefile.target | 16 +-
tests/tcg/aarch64/Makefile.softmmu-target | 21 +
tests/tcg/aarch64/Makefile.target | 3 +-
tests/tcg/aarch64/float_convs.ref | 748 +++++++++++++++++
tests/tcg/aarch64/float_madds.ref | 768 ++++++++++++++++++
tests/tcg/arm/Makefile.target | 16 +-
tests/tcg/arm/float_convs.ref | 748 +++++++++++++++++
tests/tcg/arm/float_madds.ref | 768 ++++++++++++++++++
tests/tcg/configure.sh | 1 +
tests/tcg/multiarch/Makefile.target | 23 +-
tests/tcg/multiarch/float_convs.c | 105 +++
tests/tcg/multiarch/float_helpers.c | 230 ++++++
tests/tcg/multiarch/float_helpers.h | 26 +
tests/tcg/multiarch/float_madds.c | 103 +++
24 files changed, 3688 insertions(+), 56 deletions(-)
create mode 100644 tests/docker/dockerfiles/fedora-win10sdk-cross.docker
create mode 100755 tests/tcg/aarch64/float_convs.ref
create mode 100644 tests/tcg/aarch64/float_madds.ref
create mode 100644 tests/tcg/arm/float_convs.ref
create mode 100644 tests/tcg/arm/float_madds.ref
create mode 100644 tests/tcg/multiarch/float_convs.c
create mode 100644 tests/tcg/multiarch/float_helpers.c
create mode 100644 tests/tcg/multiarch/float_helpers.h
create mode 100644 tests/tcg/multiarch/float_madds.c
--
2.20.1
next reply other threads:[~2019-09-19 17:58 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-19 17:09 Alex Bennée [this message]
2019-09-19 17:10 ` [PATCH v2 01/16] tests/docker: add sanitizers back to clang build Alex Bennée
2019-09-19 17:10 ` [PATCH v2 02/16] tests/docker: fix DOCKER_PARTIAL_IMAGES Alex Bennée
2019-09-23 19:46 ` Cleber Rosa
2019-09-19 17:10 ` [PATCH v2 03/16] tests/docker: remove python2.7 from docker9-mxe Alex Bennée
2019-09-23 19:49 ` Cleber Rosa
2019-09-23 19:55 ` John Snow
2019-09-19 17:10 ` [PATCH v2 04/16] tests/docker: reduce scary warnings from failed inspect Alex Bennée
2019-09-23 20:51 ` Cleber Rosa
2019-09-23 23:00 ` Alex Bennée
2019-09-19 17:10 ` [PATCH v2 05/16] podman: fix command invocation Alex Bennée
2019-09-23 18:47 ` Cleber Rosa
2019-09-19 17:10 ` [PATCH v2 06/16] target/ppc: fix signal delivery for ppc64abi32 Alex Bennée
2019-09-20 19:27 ` Laurent Vivier
2019-09-19 17:10 ` [PATCH v2 07/16] tests/tcg: clean-up some comments after the de-tangling Alex Bennée
2019-09-19 17:10 ` [PATCH v2 08/16] tests/tcg: re-enable linux-test for ppc64abi32 Alex Bennée
2019-09-19 22:00 ` Richard Henderson
2019-09-19 17:10 ` [PATCH v2 09/16] tests/tcg: add float_madds test to multiarch Alex Bennée
2019-09-19 22:07 ` Richard Henderson
2019-09-19 17:10 ` [PATCH v2 10/16] tests/tcg: add generic version of float_convs Alex Bennée
2019-09-19 22:09 ` Richard Henderson
2019-09-20 9:29 ` Alex Bennée
2019-09-20 10:15 ` Alex Bennée
2019-09-20 22:09 ` Richard Henderson
2019-09-19 17:10 ` [PATCH v2 11/16] tests/tcg: add simple record/replay smoke test for aarch64 Alex Bennée
2019-09-19 17:10 ` [PATCH v2 12/16] tests/docker: Add fedora-win10sdk-cross image Alex Bennée
2019-09-19 17:10 ` [PATCH v2 13/16] .shippable.yml: Build WHPX enabled binaries Alex Bennée
2019-09-19 17:10 ` [PATCH v2 14/16] configure: preserve PKG_CONFIG for subdir builds Alex Bennée
2019-09-19 22:12 ` Richard Henderson
2019-09-19 17:10 ` [PATCH v2 15/16] docs/devel: add "check-tcg" to testing.rst Alex Bennée
2019-09-19 17:10 ` [PATCH v2 16/16] Makefile: fix-up qemu-ga.8 paths to take in-src builds into account Alex Bennée
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190919171015.12681-1-alex.bennee@linaro.org \
--to=alex.bennee@linaro.org \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).