From: "Alex Bennée" <alex.bennee@linaro.org>
To: qemu-devel@nongnu.org
Cc: "Peter Maydell" <peter.maydell@linaro.org>,
"Philippe Mathieu-Daudé" <philmd@redhat.com>,
f4bug@amsat.org, jsnow@redhat.com,
"open list:ARM TCG CPUs" <qemu-arm@nongnu.org>,
"Alex Bennée" <alex.bennee@linaro.org>
Subject: [PATCH v3 17/33] tests/tcg: clean-up some comments after the de-tangling
Date: Tue, 24 Sep 2019 22:00:50 +0100 [thread overview]
Message-ID: <20190924210106.27117-18-alex.bennee@linaro.org> (raw)
In-Reply-To: <20190924210106.27117-1-alex.bennee@linaro.org>
These were missed in the recent de-tangling so have been updated to be
more actuate. I've also built up ARM_TESTS in a manner similar to
AARCH64_TESTS for better consistency.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
---
tests/tcg/Makefile.target | 7 +++++--
tests/tcg/aarch64/Makefile.target | 3 ++-
tests/tcg/arm/Makefile.target | 15 ++++++++-------
3 files changed, 15 insertions(+), 10 deletions(-)
diff --git a/tests/tcg/Makefile.target b/tests/tcg/Makefile.target
index 8808beaf74b..679eb56bd37 100644
--- a/tests/tcg/Makefile.target
+++ b/tests/tcg/Makefile.target
@@ -74,8 +74,11 @@ TIMEOUT=15
endif
ifdef CONFIG_USER_ONLY
-# The order we include is important. We include multiarch, base arch
-# and finally arch if it's not the same as base arch.
+# The order we include is important. We include multiarch first and
+# then the target. If there are common tests shared between
+# sub-targets (e.g. ARM & AArch64) then it is up to
+# $(TARGET_NAME)/Makefile.target to include the common parent
+# architecture in its VPATH.
-include $(SRC_PATH)/tests/tcg/multiarch/Makefile.target
-include $(SRC_PATH)/tests/tcg/$(TARGET_NAME)/Makefile.target
diff --git a/tests/tcg/aarch64/Makefile.target b/tests/tcg/aarch64/Makefile.target
index e763dd9da37..9758f89f905 100644
--- a/tests/tcg/aarch64/Makefile.target
+++ b/tests/tcg/aarch64/Makefile.target
@@ -8,7 +8,7 @@ VPATH += $(ARM_SRC)
AARCH64_SRC=$(SRC_PATH)/tests/tcg/aarch64
VPATH += $(AARCH64_SRC)
-# we don't build any other ARM test
+# Float-convert Tests
AARCH64_TESTS=fcvt
fcvt: LDFLAGS+=-lm
@@ -17,6 +17,7 @@ run-fcvt: fcvt
$(call run-test,$<,$(QEMU) $<, "$< on $(TARGET_NAME)")
$(call diff-out,$<,$(AARCH64_SRC)/fcvt.ref)
+# Pauth Tests
AARCH64_TESTS += pauth-1 pauth-2
run-pauth-%: QEMU_OPTS += -cpu max
diff --git a/tests/tcg/arm/Makefile.target b/tests/tcg/arm/Makefile.target
index aa4e4e3782c..7347d3d0adb 100644
--- a/tests/tcg/arm/Makefile.target
+++ b/tests/tcg/arm/Makefile.target
@@ -8,25 +8,26 @@ ARM_SRC=$(SRC_PATH)/tests/tcg/arm
# Set search path for all sources
VPATH += $(ARM_SRC)
-ARM_TESTS=hello-arm test-arm-iwmmxt
-
-TESTS += $(ARM_TESTS) fcvt
-
+# Basic Hello World
+ARM_TESTS = hello-arm
hello-arm: CFLAGS+=-marm -ffreestanding
hello-arm: LDFLAGS+=-nostdlib
+# IWMXT floating point extensions
+ARM_TESTS += test-arm-iwmmxt
test-arm-iwmmxt: CFLAGS+=-marm -march=iwmmxt -mabi=aapcs -mfpu=fpv4-sp-d16
test-arm-iwmmxt: test-arm-iwmmxt.S
$(CC) $(CFLAGS) $< -o $@ $(LDFLAGS)
-ifeq ($(TARGET_NAME), arm)
+# Float-convert Tests
+ARM_TESTS += fcvt
fcvt: LDFLAGS+=-lm
# fcvt: CFLAGS+=-march=armv8.2-a+fp16 -mfpu=neon-fp-armv8
-
run-fcvt: fcvt
$(call run-test,fcvt,$(QEMU) $<,"$< on $(TARGET_NAME)")
$(call diff-out,fcvt,$(ARM_SRC)/fcvt.ref)
-endif
+
+TESTS += $(ARM_TESTS)
# On ARM Linux only supports 4k pages
EXTRA_RUNS+=run-test-mmap-4096
--
2.20.1
next prev parent reply other threads:[~2019-09-24 22:57 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-24 21:00 [PATCH v3 00/33] testing/next (docker,tcg, alpha ;-) Alex Bennée
2019-09-24 21:00 ` [PATCH v3 01/33] target/alpha: Use array for FPCR_DYN conversion Alex Bennée
2019-09-25 22:35 ` Philippe Mathieu-Daudé
2019-09-24 21:00 ` [PATCH v3 02/33] target/alpha: Fix SWCR_MAP_UMZ Alex Bennée
2019-09-24 21:00 ` [PATCH v3 03/33] target/alpha: Fix SWCR_TRAP_ENABLE_MASK Alex Bennée
2019-09-25 22:35 ` Philippe Mathieu-Daudé
2019-09-24 21:00 ` [PATCH v3 04/33] target/alpha: Handle SWCR_MAP_DMZ earlier Alex Bennée
2019-09-24 21:00 ` [PATCH v3 05/33] target/alpha: Write to fpcr_flush_to_zero once Alex Bennée
2019-09-24 21:00 ` [PATCH v3 06/33] target/alpha: Mask IOV exception with INV for user-only Alex Bennée
2019-09-24 21:00 ` [PATCH v3 07/33] target/alpha: Tidy helper_fp_exc_raise_s Alex Bennée
2019-09-25 22:30 ` Philippe Mathieu-Daudé
2019-09-24 21:00 ` [PATCH v3 08/33] tests/migration: Fail on unexpected migration states Alex Bennée
2019-09-25 22:30 ` Philippe Mathieu-Daudé
2019-09-24 21:00 ` [PATCH v3 09/33] tests/migration/postcopy: trim migration bandwidth Alex Bennée
2019-09-24 21:00 ` [PATCH v3 10/33] migration/postcopy: Recognise the recovery states as 'in_postcopy' Alex Bennée
2019-09-24 21:00 ` [PATCH v3 11/33] target/ppc: fix signal delivery for ppc64abi32 Alex Bennée
2019-09-24 21:00 ` [PATCH v3 12/33] tests/docker: add sanitizers back to clang build Alex Bennée
2019-09-24 21:00 ` [PATCH v3 13/33] tests/docker: fix DOCKER_PARTIAL_IMAGES Alex Bennée
2019-09-24 21:00 ` [PATCH v3 14/33] tests/docker: remove python2.7 from debian9-mxe Alex Bennée
2019-09-25 22:27 ` Philippe Mathieu-Daudé
2019-09-24 21:00 ` [PATCH v3 15/33] tests/docker: reduce scary warnings by cleaning up clean up Alex Bennée
2019-09-25 18:55 ` Richard Henderson
2019-09-24 21:00 ` [PATCH v3 16/33] podman: fix command invocation Alex Bennée
2019-09-25 12:36 ` Thomas Huth
2019-09-24 21:00 ` Alex Bennée [this message]
2019-09-25 22:07 ` [PATCH v3 17/33] tests/tcg: clean-up some comments after the de-tangling Philippe Mathieu-Daudé
2019-09-25 22:10 ` Philippe Mathieu-Daudé
2019-09-24 21:00 ` [PATCH v3 18/33] tests/tcg: re-enable linux-test for ppc64abi32 Alex Bennée
2019-09-25 18:54 ` Richard Henderson
2019-09-25 22:13 ` Philippe Mathieu-Daudé
2019-09-24 21:00 ` [PATCH v3 19/33] tests/tcg: add float_madds test to multiarch Alex Bennée
2019-09-25 22:17 ` Philippe Mathieu-Daudé
2019-09-24 21:00 ` [PATCH v3 20/33] tests/tcg: add generic version of float_convs Alex Bennée
2019-09-25 22:26 ` Philippe Mathieu-Daudé
2019-09-24 21:00 ` [PATCH v3 21/33] tests/tcg: add simple record/replay smoke test for aarch64 Alex Bennée
2019-09-25 22:20 ` Philippe Mathieu-Daudé
2019-09-24 21:00 ` [PATCH v3 22/33] configure: preserve PKG_CONFIG for subdir builds Alex Bennée
2019-09-25 22:25 ` Philippe Mathieu-Daudé
2019-09-24 21:00 ` [PATCH v3 23/33] docs/devel: add "check-tcg" to testing.rst Alex Bennée
2019-09-25 18:58 ` Richard Henderson
2019-09-25 22:16 ` Philippe Mathieu-Daudé
2019-09-24 21:00 ` [PATCH v3 24/33] target/i386: Fix broken build with WHPX enabled Alex Bennée
2019-09-24 21:00 ` [PATCH v3 25/33] tests/docker: Add fedora-win10sdk-cross image Alex Bennée
2019-09-25 20:27 ` Philippe Mathieu-Daudé
2019-09-25 21:08 ` Alex Bennée
2019-09-24 21:00 ` [PATCH v3 26/33] .shippable.yml: Build WHPX enabled binaries Alex Bennée
2019-09-24 21:01 ` [PATCH v3 27/33] docker: remove debian8-mxe definitions Alex Bennée
2019-09-24 21:01 ` [PATCH v3 28/33] docker: removed unused debian8 partial image Alex Bennée
2019-09-25 12:43 ` Philippe Mathieu-Daudé
2019-09-24 21:01 ` [PATCH v3 29/33] docker: remove 'deprecated' image definitions Alex Bennée
2019-09-25 22:23 ` Philippe Mathieu-Daudé
2019-09-25 23:34 ` Alex Bennée
2019-09-26 4:28 ` Philippe Mathieu-Daudé
2019-09-26 16:04 ` Alex Bennée
2019-09-26 16:08 ` Philippe Mathieu-Daudé
2019-09-26 17:38 ` John Snow
2019-09-24 21:01 ` [PATCH v3 30/33] docker: remove unused debian-ports Alex Bennée
2019-09-25 22:23 ` Philippe Mathieu-Daudé
2019-09-24 21:01 ` [PATCH v3 31/33] docker: remove unused debian-sid Alex Bennée
2019-09-25 22:22 ` Philippe Mathieu-Daudé
2019-09-24 21:01 ` [PATCH v3 32/33] docker: move tests from python2 to python3 Alex Bennée
2019-09-25 22:22 ` Philippe Mathieu-Daudé
2019-09-24 21:01 ` [PATCH v3 33/33] tests/docker: remove debian-powerpc-user-cross Alex Bennée
2019-09-25 18:57 ` Richard Henderson
2019-09-25 22:21 ` Philippe Mathieu-Daudé
2019-09-27 12:08 ` [PATCH v3 00/33] testing/next (docker,tcg, alpha ;-) no-reply
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190924210106.27117-18-alex.bennee@linaro.org \
--to=alex.bennee@linaro.org \
--cc=f4bug@amsat.org \
--cc=jsnow@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=philmd@redhat.com \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).