From: "Cédric Le Goater" <clg@kaod.org>
To: Peter Maydell <peter.maydell@linaro.org>
Cc: "Andrew Jeffery" <andrew@aj.id.au>,
"Cédric Le Goater" <clg@kaod.org>,
qemu-arm@nongnu.org, qemu-devel@nongnu.org,
"Joel Stanley" <joel@jms.id.au>
Subject: [PATCH v2 00/23] aspeed: Add support for the AST2600 SoC
Date: Wed, 25 Sep 2019 16:32:25 +0200 [thread overview]
Message-ID: <20190925143248.10000-1-clg@kaod.org> (raw)
Hello,
The series starts with a watchdog fix and a new model for the SDHCI
controller. Follows the code for the AST2600 SoC.
Most of the Aspeed models are reworked with an object class to
introduce the AST2600 variant. A model for the AST2600 SoC and a
simple AST2600 EVB machine is proposed at the end of the series. It
can boot the OpenBMC firmware image which is currently used for HW
bringup.
Thanks,
C.
Changes since v1:
- better SMC model, proof tested against Linux and Aspeed drivers
used on HW bringup
- new w25q512jv flash model for the AST2600 EVB
- removed the use of "cntfrq" property not yet merged
- tuned the HW strapping values of the AST2600 EVB
Amithash Prasad (1):
aspeed/wdt: Check correct register for clock source
Cédric Le Goater (15):
aspeed/timer: Introduce an object class per SoC
aspeed/timer: Add support for control register 3
aspeed/timer: Add AST2600 support
aspeed/timer: Add support for IRQ status register on the AST2600
aspeed/sdmc: Introduce an object class per SoC
watchdog/aspeed: Introduce an object class per SoC
aspeed/smc: Introduce segment operations
aspeed/smc: Add AST2600 support
aspeed/i2c: Introduce an object class per SoC
aspeed/i2c: Add AST2600 support
aspeed: Introduce an object class per SoC
aspeed/soc: Add AST2600 support
m25p80: Add support for w25q512jv
aspeed: Add an AST2600 eval board
aspeed: add support for the Aspeed MII controller of the AST2600
Eddie James (1):
hw/sd/aspeed_sdhci: New device
Joel Stanley (5):
hw: aspeed_scu: Add AST2600 support
aspeed/sdmc: Add AST2600 support
hw: wdt_aspeed: Add AST2600 support
aspeed: Parameterise number of MACs
aspeed/soc: Add ASPEED Video stub
Rashmica Gupta (1):
hw/gpio: Add in AST2600 specific implementation
include/hw/arm/aspeed.h | 1 +
include/hw/arm/aspeed_soc.h | 29 +-
include/hw/i2c/aspeed_i2c.h | 20 +-
include/hw/misc/aspeed_scu.h | 7 +-
include/hw/misc/aspeed_sdmc.h | 20 +-
include/hw/net/ftgmac100.h | 17 +
include/hw/sd/aspeed_sdhci.h | 34 ++
include/hw/ssi/aspeed_smc.h | 4 +
include/hw/timer/aspeed_timer.h | 18 ++
include/hw/watchdog/wdt_aspeed.h | 19 +-
hw/arm/aspeed.c | 42 ++-
hw/arm/aspeed_ast2600.c | 523 +++++++++++++++++++++++++++++++
hw/arm/aspeed_soc.c | 199 +++++++-----
hw/block/m25p80.c | 1 +
hw/gpio/aspeed_gpio.c | 142 ++++++++-
hw/i2c/aspeed_i2c.c | 106 ++++++-
hw/misc/aspeed_scu.c | 194 +++++++++++-
hw/misc/aspeed_sdmc.c | 250 +++++++++++----
hw/net/ftgmac100.c | 162 ++++++++++
hw/sd/aspeed_sdhci.c | 198 ++++++++++++
hw/ssi/aspeed_smc.c | 177 +++++++++--
hw/timer/aspeed_timer.c | 213 +++++++++++--
hw/watchdog/wdt_aspeed.c | 153 +++++----
hw/arm/Makefile.objs | 2 +-
hw/sd/Makefile.objs | 1 +
25 files changed, 2253 insertions(+), 279 deletions(-)
create mode 100644 include/hw/sd/aspeed_sdhci.h
create mode 100644 hw/arm/aspeed_ast2600.c
create mode 100644 hw/sd/aspeed_sdhci.c
--
2.21.0
next reply other threads:[~2019-09-25 14:39 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-25 14:32 Cédric Le Goater [this message]
2019-09-25 14:32 ` [PATCH v2 01/23] aspeed/wdt: Check correct register for clock source Cédric Le Goater
2019-09-25 14:32 ` [PATCH v2 02/23] hw/sd/aspeed_sdhci: New device Cédric Le Goater
2019-09-26 8:27 ` Joel Stanley
2019-09-25 14:32 ` [PATCH v2 03/23] hw: aspeed_scu: Add AST2600 support Cédric Le Goater
2019-09-25 14:32 ` [PATCH v2 04/23] aspeed/timer: Introduce an object class per SoC Cédric Le Goater
2019-09-26 8:29 ` Joel Stanley
2019-09-25 14:32 ` [PATCH v2 05/23] aspeed/timer: Add support for control register 3 Cédric Le Goater
2019-09-26 8:30 ` Joel Stanley
2019-09-25 14:32 ` [PATCH v2 06/23] aspeed/timer: Add AST2600 support Cédric Le Goater
2019-09-25 14:32 ` [PATCH v2 07/23] aspeed/timer: Add support for IRQ status register on the AST2600 Cédric Le Goater
2019-09-25 14:32 ` [PATCH v2 08/23] aspeed/sdmc: Introduce an object class per SoC Cédric Le Goater
2019-09-25 14:32 ` [PATCH v2 09/23] aspeed/sdmc: Add AST2600 support Cédric Le Goater
2019-09-25 14:32 ` [PATCH v2 10/23] watchdog/aspeed: Introduce an object class per SoC Cédric Le Goater
2019-09-25 14:32 ` [PATCH v2 11/23] hw: wdt_aspeed: Add AST2600 support Cédric Le Goater
2019-09-25 14:32 ` [PATCH v2 12/23] aspeed/smc: Introduce segment operations Cédric Le Goater
2019-09-26 8:23 ` Joel Stanley
2019-09-25 14:32 ` [PATCH v2 13/23] aspeed/smc: Add AST2600 support Cédric Le Goater
2019-09-26 8:24 ` Joel Stanley
2019-09-25 14:32 ` [PATCH v2 14/23] hw/gpio: Add in AST2600 specific implementation Cédric Le Goater
2019-09-26 8:24 ` Joel Stanley
2019-09-25 14:32 ` [PATCH v2 15/23] aspeed/i2c: Introduce an object class per SoC Cédric Le Goater
2019-09-25 14:32 ` [PATCH v2 16/23] aspeed/i2c: Add AST2600 support Cédric Le Goater
2019-09-25 14:32 ` [PATCH v2 17/23] aspeed: Introduce an object class per SoC Cédric Le Goater
2019-09-25 14:32 ` [PATCH v2 18/23] aspeed/soc: Add AST2600 support Cédric Le Goater
2019-09-25 14:32 ` [PATCH v2 19/23] m25p80: Add support for w25q512jv Cédric Le Goater
2019-09-26 8:25 ` Joel Stanley
2019-09-25 14:32 ` [PATCH v2 20/23] aspeed: Add an AST2600 eval board Cédric Le Goater
2019-09-25 14:32 ` [PATCH v2 21/23] aspeed: Parameterise number of MACs Cédric Le Goater
2019-09-25 14:32 ` [PATCH v2 22/23] aspeed: add support for the Aspeed MII controller of the AST2600 Cédric Le Goater
2019-09-25 14:32 ` [PATCH v2 23/23] aspeed/soc: Add ASPEED Video stub Cédric Le Goater
2019-10-14 15:46 ` [PATCH v2 00/23] aspeed: Add support for the AST2600 SoC Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190925143248.10000-1-clg@kaod.org \
--to=clg@kaod.org \
--cc=andrew@aj.id.au \
--cc=joel@jms.id.au \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).