qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Alex Bennée" <alex.bennee@linaro.org>
To: peter.maydell@linaro.org
Cc: "Philippe Mathieu-Daudé" <philmd@redhat.com>,
	"open list:ARM TCG CPUs" <qemu-arm@nongnu.org>,
	"Alex Bennée" <alex.bennee@linaro.org>,
	qemu-devel@nongnu.org
Subject: [PULL 14/28] tests/tcg: clean-up some comments after the de-tangling
Date: Thu, 26 Sep 2019 19:35:39 +0100	[thread overview]
Message-ID: <20190926183553.13895-15-alex.bennee@linaro.org> (raw)
In-Reply-To: <20190926183553.13895-1-alex.bennee@linaro.org>

These were missed in the recent de-tangling so have been updated to be
more actuate. I've also built up ARM_TESTS in a manner similar to
AARCH64_TESTS for better consistency.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>

diff --git a/tests/tcg/Makefile.target b/tests/tcg/Makefile.target
index 8808beaf74..679eb56bd3 100644
--- a/tests/tcg/Makefile.target
+++ b/tests/tcg/Makefile.target
@@ -74,8 +74,11 @@ TIMEOUT=15
 endif
 
 ifdef CONFIG_USER_ONLY
-# The order we include is important. We include multiarch, base arch
-# and finally arch if it's not the same as base arch.
+# The order we include is important. We include multiarch first and
+# then the target. If there are common tests shared between
+# sub-targets (e.g. ARM & AArch64) then it is up to
+# $(TARGET_NAME)/Makefile.target to include the common parent
+# architecture in its VPATH.
 -include $(SRC_PATH)/tests/tcg/multiarch/Makefile.target
 -include $(SRC_PATH)/tests/tcg/$(TARGET_NAME)/Makefile.target
 
diff --git a/tests/tcg/aarch64/Makefile.target b/tests/tcg/aarch64/Makefile.target
index e763dd9da3..9758f89f90 100644
--- a/tests/tcg/aarch64/Makefile.target
+++ b/tests/tcg/aarch64/Makefile.target
@@ -8,7 +8,7 @@ VPATH 		+= $(ARM_SRC)
 AARCH64_SRC=$(SRC_PATH)/tests/tcg/aarch64
 VPATH 		+= $(AARCH64_SRC)
 
-# we don't build any other ARM test
+# Float-convert Tests
 AARCH64_TESTS=fcvt
 
 fcvt: LDFLAGS+=-lm
@@ -17,6 +17,7 @@ run-fcvt: fcvt
 	$(call run-test,$<,$(QEMU) $<, "$< on $(TARGET_NAME)")
 	$(call diff-out,$<,$(AARCH64_SRC)/fcvt.ref)
 
+# Pauth Tests
 AARCH64_TESTS += pauth-1 pauth-2
 run-pauth-%: QEMU_OPTS += -cpu max
 
diff --git a/tests/tcg/arm/Makefile.target b/tests/tcg/arm/Makefile.target
index aa4e4e3782..7347d3d0ad 100644
--- a/tests/tcg/arm/Makefile.target
+++ b/tests/tcg/arm/Makefile.target
@@ -8,25 +8,26 @@ ARM_SRC=$(SRC_PATH)/tests/tcg/arm
 # Set search path for all sources
 VPATH 		+= $(ARM_SRC)
 
-ARM_TESTS=hello-arm test-arm-iwmmxt
-
-TESTS += $(ARM_TESTS) fcvt
-
+# Basic Hello World
+ARM_TESTS = hello-arm
 hello-arm: CFLAGS+=-marm -ffreestanding
 hello-arm: LDFLAGS+=-nostdlib
 
+# IWMXT floating point extensions
+ARM_TESTS += test-arm-iwmmxt
 test-arm-iwmmxt: CFLAGS+=-marm -march=iwmmxt -mabi=aapcs -mfpu=fpv4-sp-d16
 test-arm-iwmmxt: test-arm-iwmmxt.S
 	$(CC) $(CFLAGS) $< -o $@ $(LDFLAGS)
 
-ifeq ($(TARGET_NAME), arm)
+# Float-convert Tests
+ARM_TESTS += fcvt
 fcvt: LDFLAGS+=-lm
 # fcvt: CFLAGS+=-march=armv8.2-a+fp16 -mfpu=neon-fp-armv8
-
 run-fcvt: fcvt
 	$(call run-test,fcvt,$(QEMU) $<,"$< on $(TARGET_NAME)")
 	$(call diff-out,fcvt,$(ARM_SRC)/fcvt.ref)
-endif
+
+TESTS += $(ARM_TESTS)
 
 # On ARM Linux only supports 4k pages
 EXTRA_RUNS+=run-test-mmap-4096
-- 
2.20.1



  parent reply	other threads:[~2019-09-26 18:59 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-26 18:35 [PULL 00/28] testing updates (docker,podman,tcg,alpha) Alex Bennée
2019-09-26 18:35 ` [PULL 01/28] target/alpha: Use array for FPCR_DYN conversion Alex Bennée
2019-09-26 18:35 ` [PULL 02/28] target/alpha: Fix SWCR_MAP_UMZ Alex Bennée
2019-09-26 18:35 ` [PULL 03/28] target/alpha: Fix SWCR_TRAP_ENABLE_MASK Alex Bennée
2019-09-26 18:35 ` [PULL 04/28] target/alpha: Handle SWCR_MAP_DMZ earlier Alex Bennée
2019-09-26 18:35 ` [PULL 05/28] target/alpha: Write to fpcr_flush_to_zero once Alex Bennée
2019-09-26 18:35 ` [PULL 06/28] target/alpha: Mask IOV exception with INV for user-only Alex Bennée
2019-09-26 18:35 ` [PULL 07/28] target/alpha: Tidy helper_fp_exc_raise_s Alex Bennée
2019-09-26 18:35 ` [PULL 08/28] target/ppc: fix signal delivery for ppc64abi32 Alex Bennée
2019-09-26 18:35 ` [PULL 09/28] tests/docker: add sanitizers back to clang build Alex Bennée
2019-10-01  7:36   ` Paolo Bonzini
2019-10-01 13:04     ` John Snow
2019-09-26 18:35 ` [PULL 10/28] tests/docker: fix DOCKER_PARTIAL_IMAGES Alex Bennée
2019-09-26 18:35 ` [PULL 11/28] tests/docker: remove python2.7 from debian9-mxe Alex Bennée
2019-09-26 18:35 ` [PULL 12/28] tests/docker: reduce scary warnings by cleaning up clean up Alex Bennée
2019-09-26 18:35 ` [PULL 13/28] podman: fix command invocation Alex Bennée
2019-09-26 18:35 ` Alex Bennée [this message]
2019-09-26 18:35 ` [PULL 15/28] tests/tcg: re-enable linux-test for ppc64abi32 Alex Bennée
2019-09-26 18:35 ` [PULL 16/28] tests/tcg: add float_madds test to multiarch Alex Bennée
2019-09-26 18:35 ` [PULL 17/28] tests/tcg: add generic version of float_convs Alex Bennée
2019-09-26 18:35 ` [PULL 18/28] tests/tcg: add simple record/replay smoke test for aarch64 Alex Bennée
2019-09-26 18:35 ` [PULL 19/28] configure: preserve PKG_CONFIG for subdir builds Alex Bennée
2019-09-26 18:35 ` [PULL 20/28] docs/devel: add "check-tcg" to testing.rst Alex Bennée
2019-09-26 18:35 ` [PULL 21/28] target/i386: Fix broken build with WHPX enabled Alex Bennée
2019-09-26 18:35 ` [PULL 22/28] docker: remove debian8-mxe definitions Alex Bennée
2019-09-26 18:35 ` [PULL 23/28] docker: remove unused debian8 partial image Alex Bennée
2019-09-26 18:35 ` [PULL 24/28] docker: remove 'deprecated' image definitions Alex Bennée
2019-09-26 18:35 ` [PULL 25/28] docker: remove unused debian-ports Alex Bennée
2019-09-26 18:35 ` [PULL 26/28] docker: remove unused debian-sid Alex Bennée
2019-09-26 18:35 ` [PULL 27/28] docker: move tests from python2 to python3 Alex Bennée
2019-09-26 18:35 ` [PULL 28/28] tests/docker: remove debian-powerpc-user-cross Alex Bennée
2019-09-27 15:53 ` [PULL 00/28] testing updates (docker,podman,tcg,alpha) Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190926183553.13895-15-alex.bennee@linaro.org \
    --to=alex.bennee@linaro.org \
    --cc=peter.maydell@linaro.org \
    --cc=philmd@redhat.com \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).