From: David Hildenbrand <david@redhat.com>
To: Peter Maydell <peter.maydell@linaro.org>, qemu-devel@nongnu.org
Cc: qemu-s390x@nongnu.org, Cornelia Huck <cohuck@redhat.com>,
Richard Henderson <richard.henderson@linaro.org>,
Thomas Huth <thuth@redhat.com>,
David Hildenbrand <david@redhat.com>
Subject: [PULL 01/31] s390x/mmu: Drop debug logging from MMU code
Date: Thu, 10 Oct 2019 13:33:26 +0200 [thread overview]
Message-ID: <20191010113356.5017-2-david@redhat.com> (raw)
In-Reply-To: <20191010113356.5017-1-david@redhat.com>
Let's get it out of the way to make some further refactorings easier.
Personally, I've never used these debug statements at all. And if I had
to debug issues, I used plain GDB instead (debug prints are just way too
much noise in the MMU). We might want to introduce tracing at some point
instead, so we can able selected events on demand.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
---
target/s390x/mmu_helper.c | 51 ---------------------------------------
1 file changed, 51 deletions(-)
diff --git a/target/s390x/mmu_helper.c b/target/s390x/mmu_helper.c
index 7e6b0d0508..6a7ad33c4d 100644
--- a/target/s390x/mmu_helper.c
+++ b/target/s390x/mmu_helper.c
@@ -28,31 +28,6 @@
#include "hw/hw.h"
#include "hw/s390x/storage-keys.h"
-/* #define DEBUG_S390 */
-/* #define DEBUG_S390_PTE */
-/* #define DEBUG_S390_STDOUT */
-
-#ifdef DEBUG_S390
-#ifdef DEBUG_S390_STDOUT
-#define DPRINTF(fmt, ...) \
- do { fprintf(stderr, fmt, ## __VA_ARGS__); \
- if (qemu_log_separate()) qemu_log(fmt, ##__VA_ARGS__); } while (0)
-#else
-#define DPRINTF(fmt, ...) \
- do { qemu_log(fmt, ## __VA_ARGS__); } while (0)
-#endif
-#else
-#define DPRINTF(fmt, ...) \
- do { } while (0)
-#endif
-
-#ifdef DEBUG_S390_PTE
-#define PTE_DPRINTF DPRINTF
-#else
-#define PTE_DPRINTF(fmt, ...) \
- do { } while (0)
-#endif
-
/* Fetch/store bits in the translation exception code: */
#define FS_READ 0x800
#define FS_WRITE 0x400
@@ -80,8 +55,6 @@ static void trigger_prot_fault(CPUS390XState *env, target_ulong vaddr,
tec = vaddr | (rw == MMU_DATA_STORE ? FS_WRITE : FS_READ) | 4 | asc >> 46;
- DPRINTF("%s: trans_exc_code=%016" PRIx64 "\n", __func__, tec);
-
if (!exc) {
return;
}
@@ -97,8 +70,6 @@ static void trigger_page_fault(CPUS390XState *env, target_ulong vaddr,
tec = vaddr | (rw == MMU_DATA_STORE ? FS_WRITE : FS_READ) | asc >> 46;
- DPRINTF("%s: trans_exc_code=%016" PRIx64 "\n", __func__, tec);
-
if (!exc) {
return;
}
@@ -162,7 +133,6 @@ static int mmu_translate_pte(CPUS390XState *env, target_ulong vaddr,
target_ulong *raddr, int *flags, int rw, bool exc)
{
if (pt_entry & PAGE_INVALID) {
- DPRINTF("%s: PTE=0x%" PRIx64 " invalid\n", __func__, pt_entry);
trigger_page_fault(env, vaddr, PGM_PAGE_TRANS, asc, rw, exc);
return -1;
}
@@ -175,9 +145,6 @@ static int mmu_translate_pte(CPUS390XState *env, target_ulong vaddr,
}
*raddr = pt_entry & ASCE_ORIGIN;
-
- PTE_DPRINTF("%s: PTE=0x%" PRIx64 "\n", __func__, pt_entry);
-
return 0;
}
@@ -197,7 +164,6 @@ static int mmu_translate_segment(CPUS390XState *env, target_ulong vaddr,
if ((st_entry & SEGMENT_ENTRY_FC) && (env->cregs[0] & CR0_EDAT)) {
/* Decode EDAT1 segment frame absolute address (1MB page) */
*raddr = (st_entry & 0xfffffffffff00000ULL) | (vaddr & 0xfffff);
- PTE_DPRINTF("%s: SEG=0x%" PRIx64 "\n", __func__, st_entry);
return 0;
}
@@ -205,8 +171,6 @@ static int mmu_translate_segment(CPUS390XState *env, target_ulong vaddr,
origin = st_entry & SEGMENT_ENTRY_ORIGIN;
offs = (vaddr & VADDR_PX) >> 9;
pt_entry = ldq_phys(cs->as, origin + offs);
- PTE_DPRINTF("%s: 0x%" PRIx64 " + 0x%" PRIx64 " => 0x%016" PRIx64 "\n",
- __func__, origin, offs, pt_entry);
return mmu_translate_pte(env, vaddr, asc, pt_entry, raddr, flags, rw, exc);
}
@@ -223,17 +187,12 @@ static int mmu_translate_region(CPUS390XState *env, target_ulong vaddr,
PGM_REG_SEC_TRANS, PGM_REG_FIRST_TRANS
};
- PTE_DPRINTF("%s: 0x%" PRIx64 "\n", __func__, entry);
-
origin = entry & REGION_ENTRY_ORIGIN;
offs = (vaddr >> (17 + 11 * level / 4)) & 0x3ff8;
new_entry = ldq_phys(cs->as, origin + offs);
- PTE_DPRINTF("%s: 0x%" PRIx64 " + 0x%" PRIx64 " => 0x%016" PRIx64 "\n",
- __func__, origin, offs, new_entry);
if ((new_entry & REGION_ENTRY_INV) != 0) {
- DPRINTF("%s: invalid region\n", __func__);
trigger_page_fault(env, vaddr, pchks[level / 4], asc, rw, exc);
return -1;
}
@@ -252,7 +211,6 @@ static int mmu_translate_region(CPUS390XState *env, target_ulong vaddr,
offs = (vaddr >> (28 + 11 * (level - 4) / 4)) & 3;
if (offs < ((new_entry & REGION_ENTRY_TF) >> 6)
|| offs > (new_entry & REGION_ENTRY_LENGTH)) {
- DPRINTF("%s: invalid offset or len (%lx)\n", __func__, new_entry);
trigger_page_fault(env, vaddr, pchks[level / 4 - 1], asc, rw, exc);
return -1;
}
@@ -289,8 +247,6 @@ static int mmu_translate_asce(CPUS390XState *env, target_ulong vaddr,
break;
case ASCE_TYPE_REGION2:
if (vaddr & 0xffe0000000000000ULL) {
- DPRINTF("%s: vaddr doesn't fit 0x%16" PRIx64
- " 0xffe0000000000000ULL\n", __func__, vaddr);
trigger_page_fault(env, vaddr, PGM_ASCE_TYPE, asc, rw, exc);
return -1;
}
@@ -301,8 +257,6 @@ static int mmu_translate_asce(CPUS390XState *env, target_ulong vaddr,
break;
case ASCE_TYPE_REGION3:
if (vaddr & 0xfffffc0000000000ULL) {
- DPRINTF("%s: vaddr doesn't fit 0x%16" PRIx64
- " 0xfffffc0000000000ULL\n", __func__, vaddr);
trigger_page_fault(env, vaddr, PGM_ASCE_TYPE, asc, rw, exc);
return -1;
}
@@ -313,8 +267,6 @@ static int mmu_translate_asce(CPUS390XState *env, target_ulong vaddr,
break;
case ASCE_TYPE_SEGMENT:
if (vaddr & 0xffffffff80000000ULL) {
- DPRINTF("%s: vaddr doesn't fit 0x%16" PRIx64
- " 0xffffffff80000000ULL\n", __func__, vaddr);
trigger_page_fault(env, vaddr, PGM_ASCE_TYPE, asc, rw, exc);
return -1;
}
@@ -449,15 +401,12 @@ int mmu_translate(CPUS390XState *env, target_ulong vaddr, int rw, uint64_t asc,
switch (asc) {
case PSW_ASC_PRIMARY:
- PTE_DPRINTF("%s: asc=primary\n", __func__);
asce = env->cregs[1];
break;
case PSW_ASC_HOME:
- PTE_DPRINTF("%s: asc=home\n", __func__);
asce = env->cregs[13];
break;
case PSW_ASC_SECONDARY:
- PTE_DPRINTF("%s: asc=secondary\n", __func__);
asce = env->cregs[7];
break;
case PSW_ASC_ACCREG:
--
2.21.0
next prev parent reply other threads:[~2019-10-10 11:37 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-10 11:33 [PULL 00/31] s390x/tcg update David Hildenbrand
2019-10-10 11:33 ` David Hildenbrand [this message]
2019-10-10 11:33 ` [PULL 02/31] s390x/mmu: Move DAT protection handling out of mmu_translate_asce() David Hildenbrand
2019-10-10 11:33 ` [PULL 03/31] s390x/mmu: Inject DAT exceptions from a single place David Hildenbrand
2019-10-10 11:33 ` [PULL 04/31] s390x/mmu: Inject PGM_ADDRESSING on bogus table addresses David Hildenbrand
2019-10-10 11:33 ` [PULL 05/31] s390x/mmu: Use TARGET_PAGE_MASK in mmu_translate_pte() David Hildenbrand
2019-10-10 11:33 ` [PULL 06/31] s390x/mmu: DAT table definition overhaul David Hildenbrand
2019-10-10 11:33 ` [PULL 07/31] s390x/mmu: Convert to non-recursive page table walk David Hildenbrand
2019-10-10 11:33 ` [PULL 08/31] s390x/mmu: Add EDAT2 translation support David Hildenbrand
2019-10-10 11:33 ` [PULL 09/31] s390x/mmu: Implement ESOP-2 and access-exception-fetch/store-indication facility David Hildenbrand
2019-10-10 11:33 ` [PULL 10/31] s390x/mmu: Implement Instruction-Execution-Protection Facility David Hildenbrand
2019-10-10 11:33 ` [PULL 11/31] s390x/cpumodel: Prepare for changes of QEMU model David Hildenbrand
2019-10-10 11:33 ` [PULL 12/31] s390x/cpumodel: Add new TCG features to QEMU cpu model David Hildenbrand
2019-10-10 11:33 ` [PULL 13/31] target/s390x: Add ilen to unwind data David Hildenbrand
2019-10-10 11:33 ` [PULL 14/31] target/s390x: Remove ilen parameter from tcg_s390_program_interrupt David Hildenbrand
2019-10-10 11:33 ` [PULL 15/31] target/s390x: Remove ilen parameter from s390_program_interrupt David Hildenbrand
2019-10-10 11:33 ` [PULL 16/31] target/s390x: Use tcg_s390_program_interrupt in TCG helpers David Hildenbrand
2019-10-10 11:33 ` [PULL 17/31] target/s390x: Push trigger_pgm_exception lower in s390_cpu_tlb_fill David Hildenbrand
2019-10-10 11:33 ` [PULL 18/31] target/s390x: Handle tec " David Hildenbrand
2019-10-10 11:33 ` [PULL 19/31] target/s390x: Return exception from mmu_translate_real David Hildenbrand
2019-10-17 11:57 ` Peter Maydell
2019-10-17 12:05 ` Peter Maydell
2019-10-17 12:13 ` David Hildenbrand
2019-10-10 11:33 ` [PULL 20/31] target/s390x: Remove exc argument to mmu_translate_asce David Hildenbrand
2019-10-10 11:33 ` [PULL 21/31] target/s390x: Return exception from mmu_translate David Hildenbrand
2019-10-10 11:33 ` [PULL 22/31] target/s390x: Return exception from translate_pages David Hildenbrand
2019-10-10 11:33 ` [PULL 23/31] target/s390x: Remove fail variable from s390_cpu_tlb_fill David Hildenbrand
2019-10-10 11:33 ` [PULL 24/31] target/s390x: Simplify helper_lra David Hildenbrand
2019-10-10 11:33 ` [PULL 25/31] target/s390x: Rely on unwinding in s390_cpu_tlb_fill David Hildenbrand
2019-10-10 11:33 ` [PULL 26/31] target/s390x: Rely on unwinding in s390_cpu_virt_mem_rw David Hildenbrand
2019-10-10 11:33 ` [PULL 27/31] target/s390x: Remove ILEN_AUTO David Hildenbrand
2019-10-10 11:33 ` [PULL 28/31] target/s390x: Remove ilen argument from trigger_access_exception David Hildenbrand
2019-10-10 11:33 ` [PULL 29/31] target/s390x: Remove ilen argument from trigger_pgm_exception David Hildenbrand
2019-10-10 11:33 ` [PULL 30/31] target/s390x: Remove ILEN_UNWIND David Hildenbrand
2019-10-10 11:33 ` [PULL 31/31] s390x/tcg: MVCL: Exit to main loop if requested David Hildenbrand
2019-10-10 12:33 ` [PULL 00/31] s390x/tcg update no-reply
2019-10-10 13:11 ` David Hildenbrand
2019-10-14 11:26 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191010113356.5017-2-david@redhat.com \
--to=david@redhat.com \
--cc=cohuck@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=qemu-s390x@nongnu.org \
--cc=richard.henderson@linaro.org \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).