qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [PULL 19/68] hw/timer/exynos4210_rtc.c: Switch main ptimer to transaction-based API
Date: Mon, 14 Oct 2019 17:03:15 +0100	[thread overview]
Message-ID: <20191014160404.19553-20-peter.maydell@linaro.org> (raw)
In-Reply-To: <20191014160404.19553-1-peter.maydell@linaro.org>

Switch the exynos41210_rtc main ptimer over to the transaction-based
API, completing the transition for this device.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191008171740.9679-17-peter.maydell@linaro.org
---
 hw/timer/exynos4210_rtc.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/hw/timer/exynos4210_rtc.c b/hw/timer/exynos4210_rtc.c
index b7ae99e9aa7..f85483a07f8 100644
--- a/hw/timer/exynos4210_rtc.c
+++ b/hw/timer/exynos4210_rtc.c
@@ -28,7 +28,6 @@
 #include "qemu/osdep.h"
 #include "qemu-common.h"
 #include "qemu/log.h"
-#include "qemu/main-loop.h"
 #include "qemu/module.h"
 #include "hw/sysbus.h"
 #include "migration/vmstate.h"
@@ -195,6 +194,7 @@ static void check_alarm_raise(Exynos4210RTCState *s)
  * RTC update frequency
  * Parameters:
  *     reg_value - current RTCCON register or his new value
+ * Must be called within a ptimer_transaction_begin/commit block for s->ptimer.
  */
 static void exynos4210_rtc_update_freq(Exynos4210RTCState *s,
                                        uint32_t reg_value)
@@ -402,6 +402,7 @@ static void exynos4210_rtc_write(void *opaque, hwaddr offset,
         break;
     case RTCCON:
         ptimer_transaction_begin(s->ptimer_1Hz);
+        ptimer_transaction_begin(s->ptimer);
         if (value & RTC_ENABLE) {
             exynos4210_rtc_update_freq(s, value);
         }
@@ -432,6 +433,7 @@ static void exynos4210_rtc_write(void *opaque, hwaddr offset,
             }
         }
         ptimer_transaction_commit(s->ptimer_1Hz);
+        ptimer_transaction_commit(s->ptimer);
         s->reg_rtccon = value;
         break;
     case TICCNT:
@@ -539,8 +541,10 @@ static void exynos4210_rtc_reset(DeviceState *d)
 
     s->reg_curticcnt = 0;
 
+    ptimer_transaction_begin(s->ptimer);
     exynos4210_rtc_update_freq(s, s->reg_rtccon);
     ptimer_stop(s->ptimer);
+    ptimer_transaction_commit(s->ptimer);
     ptimer_transaction_begin(s->ptimer_1Hz);
     ptimer_stop(s->ptimer_1Hz);
     ptimer_transaction_commit(s->ptimer_1Hz);
@@ -559,12 +563,12 @@ static void exynos4210_rtc_init(Object *obj)
 {
     Exynos4210RTCState *s = EXYNOS4210_RTC(obj);
     SysBusDevice *dev = SYS_BUS_DEVICE(obj);
-    QEMUBH *bh;
 
-    bh = qemu_bh_new(exynos4210_rtc_tick, s);
-    s->ptimer = ptimer_init_with_bh(bh, PTIMER_POLICY_DEFAULT);
+    s->ptimer = ptimer_init(exynos4210_rtc_tick, s, PTIMER_POLICY_DEFAULT);
+    ptimer_transaction_begin(s->ptimer);
     ptimer_set_freq(s->ptimer, RTC_BASE_FREQ);
     exynos4210_rtc_update_freq(s, 0);
+    ptimer_transaction_commit(s->ptimer);
 
     s->ptimer_1Hz = ptimer_init(exynos4210_rtc_1Hz_tick,
                                 s, PTIMER_POLICY_DEFAULT);
-- 
2.20.1



  parent reply	other threads:[~2019-10-14 16:23 UTC|newest]

Thread overview: 76+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-14 16:02 [PULL 00/68] target-arm queue Peter Maydell
2019-10-14 16:02 ` [PULL 01/68] linux headers: update against v5.4-rc1 Peter Maydell
2019-10-14 16:02 ` [PULL 02/68] intc/arm_gic: Support IRQ injection for more than 256 vpus Peter Maydell
2019-10-14 16:02 ` [PULL 03/68] ARM: KVM: Check KVM_CAP_ARM_IRQ_LINE_LAYOUT_2 for smp_cpus > 256 Peter Maydell
2019-10-14 16:03 ` [PULL 04/68] ptimer: Rename ptimer_init() to ptimer_init_with_bh() Peter Maydell
2019-10-14 16:03 ` [PULL 05/68] ptimer: Provide new transaction-based API Peter Maydell
2019-10-14 16:03 ` [PULL 06/68] tests/ptimer-test: Switch to transaction-based ptimer API Peter Maydell
2019-10-14 16:03 ` [PULL 07/68] hw/timer/arm_timer.c: " Peter Maydell
2019-10-14 16:03 ` [PULL 08/68] hw/arm/musicpal.c: " Peter Maydell
2019-10-14 16:03 ` [PULL 09/68] hw/timer/allwinner-a10-pit.c: " Peter Maydell
2019-10-14 16:03 ` [PULL 10/68] hw/timer/arm_mptimer.c: " Peter Maydell
2019-10-14 16:03 ` [PULL 11/68] hw/timer/cmsdk-apb-dualtimer.c: " Peter Maydell
2019-10-14 16:03 ` [PULL 12/68] hw/timer/cmsdk-apb-timer.c: " Peter Maydell
2019-10-14 16:03 ` [PULL 13/68] hw/timer/digic-timer.c: " Peter Maydell
2019-10-14 16:03 ` [PULL 14/68] hw/timer/exynos4210_mct.c: Switch GFRC " Peter Maydell
2019-10-14 16:03 ` [PULL 15/68] hw/timer/exynos4210_mct.c: Switch LFRC " Peter Maydell
2019-10-14 16:03 ` [PULL 16/68] hw/timer/exynos4210_mct.c: Switch ltick " Peter Maydell
2019-10-14 16:03 ` [PULL 17/68] hw/timer/exynos4210_pwm.c: Switch " Peter Maydell
2019-10-14 16:03 ` [PULL 18/68] hw/timer/exynos4210_rtc.c: Switch 1Hz ptimer to transaction-based API Peter Maydell
2019-10-14 16:03 ` Peter Maydell [this message]
2019-10-14 16:03 ` [PULL 20/68] hw/timer/imx_epit.c: Switch to transaction-based ptimer API Peter Maydell
2019-10-14 16:03 ` [PULL 21/68] hw/timer/imx_gpt.c: " Peter Maydell
2019-10-14 16:03 ` [PULL 22/68] hw/timer/mss-timerc: " Peter Maydell
2019-10-14 16:03 ` [PULL 23/68] hw/watchdog/cmsdk-apb-watchdog.c: " Peter Maydell
2019-10-14 16:03 ` [PULL 24/68] hw/net/lan9118.c: " Peter Maydell
2019-10-14 16:03 ` [PULL 25/68] target/arm/arm-semi: Capture errno in softmmu version of set_swi_errno() Peter Maydell
2019-10-14 16:03 ` [PULL 26/68] target/arm/arm-semi: Always set some kind of errno for failed calls Peter Maydell
2019-10-14 16:03 ` [PULL 27/68] target/arm/arm-semi: Correct comment about gdb syscall races Peter Maydell
2019-10-14 16:03 ` [PULL 28/68] target/arm/arm-semi: Make semihosting code hand out its own file descriptors Peter Maydell
2019-10-14 16:03 ` [PULL 29/68] target/arm/arm-semi: Restrict use of TaskState* Peter Maydell
2019-10-14 16:03 ` [PULL 30/68] target/arm/arm-semi: Use set_swi_errno() in gdbstub callback functions Peter Maydell
2019-10-14 16:03 ` [PULL 31/68] target/arm/arm-semi: Factor out implementation of SYS_CLOSE Peter Maydell
2019-10-14 16:03 ` [PULL 32/68] target/arm/arm-semi: Factor out implementation of SYS_WRITE Peter Maydell
2019-10-14 16:03 ` [PULL 33/68] target/arm/arm-semi: Factor out implementation of SYS_READ Peter Maydell
2019-10-14 16:03 ` [PULL 34/68] target/arm/arm-semi: Factor out implementation of SYS_ISTTY Peter Maydell
2019-10-14 16:03 ` [PULL 35/68] target/arm/arm-semi: Factor out implementation of SYS_SEEK Peter Maydell
2019-10-14 16:03 ` [PULL 36/68] target/arm/arm-semi: Factor out implementation of SYS_FLEN Peter Maydell
2019-10-14 16:03 ` [PULL 37/68] target/arm/arm-semi: Implement support for semihosting feature detection Peter Maydell
2019-10-14 16:03 ` [PULL 38/68] target/arm/arm-semi: Implement SH_EXT_EXIT_EXTENDED extension Peter Maydell
2019-10-14 16:03 ` [PULL 39/68] target/arm/arm-semi: Implement SH_EXT_STDOUT_STDERR extension Peter Maydell
2019-10-14 16:03 ` [PULL 40/68] aspeed/wdt: Check correct register for clock source Peter Maydell
2019-10-14 16:03 ` [PULL 41/68] hw/sd/aspeed_sdhci: New device Peter Maydell
2019-10-14 16:03 ` [PULL 42/68] hw: aspeed_scu: Add AST2600 support Peter Maydell
2019-10-14 16:03 ` [PULL 43/68] aspeed/timer: Introduce an object class per SoC Peter Maydell
2019-10-14 16:03 ` [PULL 44/68] aspeed/timer: Add support for control register 3 Peter Maydell
2019-10-14 16:03 ` [PULL 45/68] aspeed/timer: Add AST2600 support Peter Maydell
2019-10-14 16:03 ` [PULL 46/68] aspeed/timer: Add support for IRQ status register on the AST2600 Peter Maydell
2019-10-14 16:03 ` [PULL 47/68] aspeed/sdmc: Introduce an object class per SoC Peter Maydell
2019-10-14 16:03 ` [PULL 48/68] aspeed/sdmc: Add AST2600 support Peter Maydell
2019-10-14 16:03 ` [PULL 49/68] watchdog/aspeed: Introduce an object class per SoC Peter Maydell
2019-10-14 16:03 ` [PULL 50/68] hw: wdt_aspeed: Add AST2600 support Peter Maydell
2019-10-14 16:03 ` [PULL 51/68] aspeed/smc: Introduce segment operations Peter Maydell
2019-10-14 16:03 ` [PULL 52/68] aspeed/smc: Add AST2600 support Peter Maydell
2019-10-14 16:03 ` [PULL 53/68] hw/gpio: Add in AST2600 specific implementation Peter Maydell
2019-10-14 16:03 ` [PULL 54/68] aspeed/i2c: Introduce an object class per SoC Peter Maydell
2019-10-14 16:03 ` [PULL 55/68] aspeed/i2c: Add AST2600 support Peter Maydell
2019-10-14 16:03 ` [PULL 56/68] aspeed: Introduce an object class per SoC Peter Maydell
2019-10-14 16:03 ` [PULL 57/68] aspeed/soc: Add AST2600 support Peter Maydell
2019-10-14 16:03 ` [PULL 58/68] m25p80: Add support for w25q512jv Peter Maydell
2019-10-14 16:03 ` [PULL 59/68] aspeed: Add an AST2600 eval board Peter Maydell
2019-10-15 17:03   ` Peter Maydell
2019-10-15 17:43     ` Cédric Le Goater
2019-10-15 17:55       ` Peter Maydell
2019-10-16 11:28         ` Joel Stanley
2019-10-16 12:20     ` Philippe Mathieu-Daudé
2019-10-16 12:41       ` Cédric Le Goater
2019-10-16 12:44         ` Philippe Mathieu-Daudé
2019-10-14 16:03 ` [PULL 60/68] aspeed: Parameterise number of MACs Peter Maydell
2019-10-14 16:03 ` [PULL 61/68] aspeed: add support for the Aspeed MII controller of the AST2600 Peter Maydell
2019-10-14 16:03 ` [PULL 62/68] aspeed/soc: Add ASPEED Video stub Peter Maydell
2019-10-14 16:03 ` [PULL 63/68] hw/arm/raspi: Use the IEC binary prefix definitions Peter Maydell
2019-10-14 16:04 ` [PULL 64/68] hw/arm/bcm2835_peripherals: Improve logging Peter Maydell
2019-10-14 16:04 ` [PULL 65/68] hw/arm/bcm2835_peripherals: Name various address spaces Peter Maydell
2019-10-14 16:04 ` [PULL 66/68] hw/arm/bcm2835: Rename some definitions Peter Maydell
2019-10-14 16:04 ` [PULL 67/68] hw/arm/bcm2835: Add various unimplemented peripherals Peter Maydell
2019-10-14 16:04 ` [PULL 68/68] hw/misc/bcm2835_mbox: Add trace events Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191014160404.19553-20-peter.maydell@linaro.org \
    --to=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).