From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [PULL 33/68] target/arm/arm-semi: Factor out implementation of SYS_READ
Date: Mon, 14 Oct 2019 17:03:29 +0100 [thread overview]
Message-ID: <20191014160404.19553-34-peter.maydell@linaro.org> (raw)
In-Reply-To: <20191014160404.19553-1-peter.maydell@linaro.org>
Factor out the implementation of SYS_READ via the
new function tables.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190916141544.17540-10-peter.maydell@linaro.org
---
target/arm/arm-semi.c | 55 +++++++++++++++++++++++++++----------------
1 file changed, 35 insertions(+), 20 deletions(-)
diff --git a/target/arm/arm-semi.c b/target/arm/arm-semi.c
index c21cbb97bc1..958083a105c 100644
--- a/target/arm/arm-semi.c
+++ b/target/arm/arm-semi.c
@@ -386,6 +386,8 @@ static target_ulong arm_gdb_syscall(ARMCPU *cpu, gdb_syscall_complete_cb cb,
typedef uint32_t sys_closefn(ARMCPU *cpu, GuestFD *gf);
typedef uint32_t sys_writefn(ARMCPU *cpu, GuestFD *gf,
target_ulong buf, uint32_t len);
+typedef uint32_t sys_readfn(ARMCPU *cpu, GuestFD *gf,
+ target_ulong buf, uint32_t len);
static uint32_t host_closefn(ARMCPU *cpu, GuestFD *gf)
{
@@ -413,6 +415,27 @@ static uint32_t host_writefn(ARMCPU *cpu, GuestFD *gf,
return len - ret;
}
+static uint32_t host_readfn(ARMCPU *cpu, GuestFD *gf,
+ target_ulong buf, uint32_t len)
+{
+ uint32_t ret;
+ CPUARMState *env = &cpu->env;
+ char *s = lock_user(VERIFY_WRITE, buf, len, 0);
+ if (!s) {
+ /* return bytes not read */
+ return len;
+ }
+ do {
+ ret = set_swi_errno(env, read(gf->hostfd, s, len));
+ } while (ret == -1 && errno == EINTR);
+ unlock_user(s, buf, len);
+ if (ret == (uint32_t)-1) {
+ ret = 0;
+ }
+ /* Return bytes not read */
+ return len - ret;
+}
+
static uint32_t gdb_closefn(ARMCPU *cpu, GuestFD *gf)
{
return arm_gdb_syscall(cpu, arm_semi_cb, "close,%x", gf->hostfd);
@@ -426,19 +449,30 @@ static uint32_t gdb_writefn(ARMCPU *cpu, GuestFD *gf,
gf->hostfd, buf, len);
}
+static uint32_t gdb_readfn(ARMCPU *cpu, GuestFD *gf,
+ target_ulong buf, uint32_t len)
+{
+ arm_semi_syscall_len = len;
+ return arm_gdb_syscall(cpu, arm_semi_cb, "read,%x,%x,%x",
+ gf->hostfd, buf, len);
+}
+
typedef struct GuestFDFunctions {
sys_closefn *closefn;
sys_writefn *writefn;
+ sys_readfn *readfn;
} GuestFDFunctions;
static const GuestFDFunctions guestfd_fns[] = {
[GuestFDHost] = {
.closefn = host_closefn,
.writefn = host_writefn,
+ .readfn = host_readfn,
},
[GuestFDGDB] = {
.closefn = gdb_closefn,
.writefn = gdb_writefn,
+ .readfn = gdb_readfn,
},
};
@@ -584,26 +618,7 @@ target_ulong do_arm_semihosting(CPUARMState *env)
return set_swi_errno(env, -1);
}
- if (use_gdb_syscalls()) {
- arm_semi_syscall_len = len;
- return arm_gdb_syscall(cpu, arm_semi_cb, "read,%x,%x,%x",
- gf->hostfd, arg1, len);
- } else {
- s = lock_user(VERIFY_WRITE, arg1, len, 0);
- if (!s) {
- /* return bytes not read */
- return len;
- }
- do {
- ret = set_swi_errno(env, read(gf->hostfd, s, len));
- } while (ret == -1 && errno == EINTR);
- unlock_user(s, arg1, len);
- if (ret == (uint32_t)-1) {
- ret = 0;
- }
- /* Return bytes not read */
- return len - ret;
- }
+ return guestfd_fns[gf->type].readfn(cpu, gf, arg1, len);
case TARGET_SYS_READC:
qemu_log_mask(LOG_UNIMP, "%s: SYS_READC not implemented", __func__);
return 0;
--
2.20.1
next prev parent reply other threads:[~2019-10-14 16:31 UTC|newest]
Thread overview: 76+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-14 16:02 [PULL 00/68] target-arm queue Peter Maydell
2019-10-14 16:02 ` [PULL 01/68] linux headers: update against v5.4-rc1 Peter Maydell
2019-10-14 16:02 ` [PULL 02/68] intc/arm_gic: Support IRQ injection for more than 256 vpus Peter Maydell
2019-10-14 16:02 ` [PULL 03/68] ARM: KVM: Check KVM_CAP_ARM_IRQ_LINE_LAYOUT_2 for smp_cpus > 256 Peter Maydell
2019-10-14 16:03 ` [PULL 04/68] ptimer: Rename ptimer_init() to ptimer_init_with_bh() Peter Maydell
2019-10-14 16:03 ` [PULL 05/68] ptimer: Provide new transaction-based API Peter Maydell
2019-10-14 16:03 ` [PULL 06/68] tests/ptimer-test: Switch to transaction-based ptimer API Peter Maydell
2019-10-14 16:03 ` [PULL 07/68] hw/timer/arm_timer.c: " Peter Maydell
2019-10-14 16:03 ` [PULL 08/68] hw/arm/musicpal.c: " Peter Maydell
2019-10-14 16:03 ` [PULL 09/68] hw/timer/allwinner-a10-pit.c: " Peter Maydell
2019-10-14 16:03 ` [PULL 10/68] hw/timer/arm_mptimer.c: " Peter Maydell
2019-10-14 16:03 ` [PULL 11/68] hw/timer/cmsdk-apb-dualtimer.c: " Peter Maydell
2019-10-14 16:03 ` [PULL 12/68] hw/timer/cmsdk-apb-timer.c: " Peter Maydell
2019-10-14 16:03 ` [PULL 13/68] hw/timer/digic-timer.c: " Peter Maydell
2019-10-14 16:03 ` [PULL 14/68] hw/timer/exynos4210_mct.c: Switch GFRC " Peter Maydell
2019-10-14 16:03 ` [PULL 15/68] hw/timer/exynos4210_mct.c: Switch LFRC " Peter Maydell
2019-10-14 16:03 ` [PULL 16/68] hw/timer/exynos4210_mct.c: Switch ltick " Peter Maydell
2019-10-14 16:03 ` [PULL 17/68] hw/timer/exynos4210_pwm.c: Switch " Peter Maydell
2019-10-14 16:03 ` [PULL 18/68] hw/timer/exynos4210_rtc.c: Switch 1Hz ptimer to transaction-based API Peter Maydell
2019-10-14 16:03 ` [PULL 19/68] hw/timer/exynos4210_rtc.c: Switch main " Peter Maydell
2019-10-14 16:03 ` [PULL 20/68] hw/timer/imx_epit.c: Switch to transaction-based ptimer API Peter Maydell
2019-10-14 16:03 ` [PULL 21/68] hw/timer/imx_gpt.c: " Peter Maydell
2019-10-14 16:03 ` [PULL 22/68] hw/timer/mss-timerc: " Peter Maydell
2019-10-14 16:03 ` [PULL 23/68] hw/watchdog/cmsdk-apb-watchdog.c: " Peter Maydell
2019-10-14 16:03 ` [PULL 24/68] hw/net/lan9118.c: " Peter Maydell
2019-10-14 16:03 ` [PULL 25/68] target/arm/arm-semi: Capture errno in softmmu version of set_swi_errno() Peter Maydell
2019-10-14 16:03 ` [PULL 26/68] target/arm/arm-semi: Always set some kind of errno for failed calls Peter Maydell
2019-10-14 16:03 ` [PULL 27/68] target/arm/arm-semi: Correct comment about gdb syscall races Peter Maydell
2019-10-14 16:03 ` [PULL 28/68] target/arm/arm-semi: Make semihosting code hand out its own file descriptors Peter Maydell
2019-10-14 16:03 ` [PULL 29/68] target/arm/arm-semi: Restrict use of TaskState* Peter Maydell
2019-10-14 16:03 ` [PULL 30/68] target/arm/arm-semi: Use set_swi_errno() in gdbstub callback functions Peter Maydell
2019-10-14 16:03 ` [PULL 31/68] target/arm/arm-semi: Factor out implementation of SYS_CLOSE Peter Maydell
2019-10-14 16:03 ` [PULL 32/68] target/arm/arm-semi: Factor out implementation of SYS_WRITE Peter Maydell
2019-10-14 16:03 ` Peter Maydell [this message]
2019-10-14 16:03 ` [PULL 34/68] target/arm/arm-semi: Factor out implementation of SYS_ISTTY Peter Maydell
2019-10-14 16:03 ` [PULL 35/68] target/arm/arm-semi: Factor out implementation of SYS_SEEK Peter Maydell
2019-10-14 16:03 ` [PULL 36/68] target/arm/arm-semi: Factor out implementation of SYS_FLEN Peter Maydell
2019-10-14 16:03 ` [PULL 37/68] target/arm/arm-semi: Implement support for semihosting feature detection Peter Maydell
2019-10-14 16:03 ` [PULL 38/68] target/arm/arm-semi: Implement SH_EXT_EXIT_EXTENDED extension Peter Maydell
2019-10-14 16:03 ` [PULL 39/68] target/arm/arm-semi: Implement SH_EXT_STDOUT_STDERR extension Peter Maydell
2019-10-14 16:03 ` [PULL 40/68] aspeed/wdt: Check correct register for clock source Peter Maydell
2019-10-14 16:03 ` [PULL 41/68] hw/sd/aspeed_sdhci: New device Peter Maydell
2019-10-14 16:03 ` [PULL 42/68] hw: aspeed_scu: Add AST2600 support Peter Maydell
2019-10-14 16:03 ` [PULL 43/68] aspeed/timer: Introduce an object class per SoC Peter Maydell
2019-10-14 16:03 ` [PULL 44/68] aspeed/timer: Add support for control register 3 Peter Maydell
2019-10-14 16:03 ` [PULL 45/68] aspeed/timer: Add AST2600 support Peter Maydell
2019-10-14 16:03 ` [PULL 46/68] aspeed/timer: Add support for IRQ status register on the AST2600 Peter Maydell
2019-10-14 16:03 ` [PULL 47/68] aspeed/sdmc: Introduce an object class per SoC Peter Maydell
2019-10-14 16:03 ` [PULL 48/68] aspeed/sdmc: Add AST2600 support Peter Maydell
2019-10-14 16:03 ` [PULL 49/68] watchdog/aspeed: Introduce an object class per SoC Peter Maydell
2019-10-14 16:03 ` [PULL 50/68] hw: wdt_aspeed: Add AST2600 support Peter Maydell
2019-10-14 16:03 ` [PULL 51/68] aspeed/smc: Introduce segment operations Peter Maydell
2019-10-14 16:03 ` [PULL 52/68] aspeed/smc: Add AST2600 support Peter Maydell
2019-10-14 16:03 ` [PULL 53/68] hw/gpio: Add in AST2600 specific implementation Peter Maydell
2019-10-14 16:03 ` [PULL 54/68] aspeed/i2c: Introduce an object class per SoC Peter Maydell
2019-10-14 16:03 ` [PULL 55/68] aspeed/i2c: Add AST2600 support Peter Maydell
2019-10-14 16:03 ` [PULL 56/68] aspeed: Introduce an object class per SoC Peter Maydell
2019-10-14 16:03 ` [PULL 57/68] aspeed/soc: Add AST2600 support Peter Maydell
2019-10-14 16:03 ` [PULL 58/68] m25p80: Add support for w25q512jv Peter Maydell
2019-10-14 16:03 ` [PULL 59/68] aspeed: Add an AST2600 eval board Peter Maydell
2019-10-15 17:03 ` Peter Maydell
2019-10-15 17:43 ` Cédric Le Goater
2019-10-15 17:55 ` Peter Maydell
2019-10-16 11:28 ` Joel Stanley
2019-10-16 12:20 ` Philippe Mathieu-Daudé
2019-10-16 12:41 ` Cédric Le Goater
2019-10-16 12:44 ` Philippe Mathieu-Daudé
2019-10-14 16:03 ` [PULL 60/68] aspeed: Parameterise number of MACs Peter Maydell
2019-10-14 16:03 ` [PULL 61/68] aspeed: add support for the Aspeed MII controller of the AST2600 Peter Maydell
2019-10-14 16:03 ` [PULL 62/68] aspeed/soc: Add ASPEED Video stub Peter Maydell
2019-10-14 16:03 ` [PULL 63/68] hw/arm/raspi: Use the IEC binary prefix definitions Peter Maydell
2019-10-14 16:04 ` [PULL 64/68] hw/arm/bcm2835_peripherals: Improve logging Peter Maydell
2019-10-14 16:04 ` [PULL 65/68] hw/arm/bcm2835_peripherals: Name various address spaces Peter Maydell
2019-10-14 16:04 ` [PULL 66/68] hw/arm/bcm2835: Rename some definitions Peter Maydell
2019-10-14 16:04 ` [PULL 67/68] hw/arm/bcm2835: Add various unimplemented peripherals Peter Maydell
2019-10-14 16:04 ` [PULL 68/68] hw/misc/bcm2835_mbox: Add trace events Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191014160404.19553-34-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).