From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [PULL 50/68] hw: wdt_aspeed: Add AST2600 support
Date: Mon, 14 Oct 2019 17:03:46 +0100 [thread overview]
Message-ID: <20191014160404.19553-51-peter.maydell@linaro.org> (raw)
In-Reply-To: <20191014160404.19553-1-peter.maydell@linaro.org>
From: Joel Stanley <joel@jms.id.au>
The AST2600 has four watchdogs, and they each have a 0x40 of registers.
When running as part of an ast2600 system we must check a different
offset for the system reset control register in the SCU.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20190925143248.10000-12-clg@kaod.org
[clg: - reworked model integration into new object class ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
include/hw/arm/aspeed_soc.h | 2 +-
include/hw/watchdog/wdt_aspeed.h | 1 +
hw/watchdog/wdt_aspeed.c | 29 +++++++++++++++++++++++++++++
3 files changed, 31 insertions(+), 1 deletion(-)
diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h
index ba5bbb53e1a..b427f2668a8 100644
--- a/include/hw/arm/aspeed_soc.h
+++ b/include/hw/arm/aspeed_soc.h
@@ -27,7 +27,7 @@
#include "hw/sd/aspeed_sdhci.h"
#define ASPEED_SPIS_NUM 2
-#define ASPEED_WDTS_NUM 3
+#define ASPEED_WDTS_NUM 4
#define ASPEED_CPUS_NUM 2
#define ASPEED_MACS_NUM 2
diff --git a/include/hw/watchdog/wdt_aspeed.h b/include/hw/watchdog/wdt_aspeed.h
index 796342764e2..dfedd7662dd 100644
--- a/include/hw/watchdog/wdt_aspeed.h
+++ b/include/hw/watchdog/wdt_aspeed.h
@@ -18,6 +18,7 @@
OBJECT_CHECK(AspeedWDTState, (obj), TYPE_ASPEED_WDT)
#define TYPE_ASPEED_2400_WDT TYPE_ASPEED_WDT "-ast2400"
#define TYPE_ASPEED_2500_WDT TYPE_ASPEED_WDT "-ast2500"
+#define TYPE_ASPEED_2600_WDT TYPE_ASPEED_WDT "-ast2600"
#define ASPEED_WDT_REGS_MAX (0x20 / 4)
diff --git a/hw/watchdog/wdt_aspeed.c b/hw/watchdog/wdt_aspeed.c
index fc0e6c486a7..145be6f99ce 100644
--- a/hw/watchdog/wdt_aspeed.c
+++ b/hw/watchdog/wdt_aspeed.c
@@ -40,12 +40,14 @@
#define WDT_DRIVE_TYPE_MASK (0xFF << 24)
#define WDT_PUSH_PULL_MAGIC (0xA8 << 24)
#define WDT_OPEN_DRAIN_MAGIC (0x8A << 24)
+#define WDT_RESET_MASK1 (0x1c / 4)
#define WDT_TIMEOUT_STATUS (0x10 / 4)
#define WDT_TIMEOUT_CLEAR (0x14 / 4)
#define WDT_RESTART_MAGIC 0x4755
+#define AST2600_SCU_RESET_CONTROL1 (0x40 / 4)
#define SCU_RESET_CONTROL1 (0x04 / 4)
#define SCU_RESET_SDRAM BIT(0)
@@ -74,6 +76,8 @@ static uint64_t aspeed_wdt_read(void *opaque, hwaddr offset, unsigned size)
return s->regs[WDT_CTRL];
case WDT_RESET_WIDTH:
return s->regs[WDT_RESET_WIDTH];
+ case WDT_RESET_MASK1:
+ return s->regs[WDT_RESET_MASK1];
case WDT_TIMEOUT_STATUS:
case WDT_TIMEOUT_CLEAR:
qemu_log_mask(LOG_UNIMP,
@@ -146,6 +150,11 @@ static void aspeed_wdt_write(void *opaque, hwaddr offset, uint64_t data,
s->regs[WDT_RESET_WIDTH] |= data & awc->ext_pulse_width_mask;
break;
+ case WDT_RESET_MASK1:
+ /* TODO: implement */
+ s->regs[WDT_RESET_MASK1] = data;
+ break;
+
case WDT_TIMEOUT_STATUS:
case WDT_TIMEOUT_CLEAR:
qemu_log_mask(LOG_UNIMP,
@@ -316,12 +325,32 @@ static const TypeInfo aspeed_2500_wdt_info = {
.class_init = aspeed_2500_wdt_class_init,
};
+static void aspeed_2600_wdt_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ AspeedWDTClass *awc = ASPEED_WDT_CLASS(klass);
+
+ dc->desc = "ASPEED 2600 Watchdog Controller";
+ awc->offset = 0x40;
+ awc->ext_pulse_width_mask = 0xfffff; /* TODO */
+ awc->reset_ctrl_reg = AST2600_SCU_RESET_CONTROL1;
+ awc->reset_pulse = aspeed_2500_wdt_reset_pulse;
+}
+
+static const TypeInfo aspeed_2600_wdt_info = {
+ .name = TYPE_ASPEED_2600_WDT,
+ .parent = TYPE_ASPEED_WDT,
+ .instance_size = sizeof(AspeedWDTState),
+ .class_init = aspeed_2600_wdt_class_init,
+};
+
static void wdt_aspeed_register_types(void)
{
watchdog_add_model(&model);
type_register_static(&aspeed_wdt_info);
type_register_static(&aspeed_2400_wdt_info);
type_register_static(&aspeed_2500_wdt_info);
+ type_register_static(&aspeed_2600_wdt_info);
}
type_init(wdt_aspeed_register_types)
--
2.20.1
next prev parent reply other threads:[~2019-10-14 16:50 UTC|newest]
Thread overview: 76+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-14 16:02 [PULL 00/68] target-arm queue Peter Maydell
2019-10-14 16:02 ` [PULL 01/68] linux headers: update against v5.4-rc1 Peter Maydell
2019-10-14 16:02 ` [PULL 02/68] intc/arm_gic: Support IRQ injection for more than 256 vpus Peter Maydell
2019-10-14 16:02 ` [PULL 03/68] ARM: KVM: Check KVM_CAP_ARM_IRQ_LINE_LAYOUT_2 for smp_cpus > 256 Peter Maydell
2019-10-14 16:03 ` [PULL 04/68] ptimer: Rename ptimer_init() to ptimer_init_with_bh() Peter Maydell
2019-10-14 16:03 ` [PULL 05/68] ptimer: Provide new transaction-based API Peter Maydell
2019-10-14 16:03 ` [PULL 06/68] tests/ptimer-test: Switch to transaction-based ptimer API Peter Maydell
2019-10-14 16:03 ` [PULL 07/68] hw/timer/arm_timer.c: " Peter Maydell
2019-10-14 16:03 ` [PULL 08/68] hw/arm/musicpal.c: " Peter Maydell
2019-10-14 16:03 ` [PULL 09/68] hw/timer/allwinner-a10-pit.c: " Peter Maydell
2019-10-14 16:03 ` [PULL 10/68] hw/timer/arm_mptimer.c: " Peter Maydell
2019-10-14 16:03 ` [PULL 11/68] hw/timer/cmsdk-apb-dualtimer.c: " Peter Maydell
2019-10-14 16:03 ` [PULL 12/68] hw/timer/cmsdk-apb-timer.c: " Peter Maydell
2019-10-14 16:03 ` [PULL 13/68] hw/timer/digic-timer.c: " Peter Maydell
2019-10-14 16:03 ` [PULL 14/68] hw/timer/exynos4210_mct.c: Switch GFRC " Peter Maydell
2019-10-14 16:03 ` [PULL 15/68] hw/timer/exynos4210_mct.c: Switch LFRC " Peter Maydell
2019-10-14 16:03 ` [PULL 16/68] hw/timer/exynos4210_mct.c: Switch ltick " Peter Maydell
2019-10-14 16:03 ` [PULL 17/68] hw/timer/exynos4210_pwm.c: Switch " Peter Maydell
2019-10-14 16:03 ` [PULL 18/68] hw/timer/exynos4210_rtc.c: Switch 1Hz ptimer to transaction-based API Peter Maydell
2019-10-14 16:03 ` [PULL 19/68] hw/timer/exynos4210_rtc.c: Switch main " Peter Maydell
2019-10-14 16:03 ` [PULL 20/68] hw/timer/imx_epit.c: Switch to transaction-based ptimer API Peter Maydell
2019-10-14 16:03 ` [PULL 21/68] hw/timer/imx_gpt.c: " Peter Maydell
2019-10-14 16:03 ` [PULL 22/68] hw/timer/mss-timerc: " Peter Maydell
2019-10-14 16:03 ` [PULL 23/68] hw/watchdog/cmsdk-apb-watchdog.c: " Peter Maydell
2019-10-14 16:03 ` [PULL 24/68] hw/net/lan9118.c: " Peter Maydell
2019-10-14 16:03 ` [PULL 25/68] target/arm/arm-semi: Capture errno in softmmu version of set_swi_errno() Peter Maydell
2019-10-14 16:03 ` [PULL 26/68] target/arm/arm-semi: Always set some kind of errno for failed calls Peter Maydell
2019-10-14 16:03 ` [PULL 27/68] target/arm/arm-semi: Correct comment about gdb syscall races Peter Maydell
2019-10-14 16:03 ` [PULL 28/68] target/arm/arm-semi: Make semihosting code hand out its own file descriptors Peter Maydell
2019-10-14 16:03 ` [PULL 29/68] target/arm/arm-semi: Restrict use of TaskState* Peter Maydell
2019-10-14 16:03 ` [PULL 30/68] target/arm/arm-semi: Use set_swi_errno() in gdbstub callback functions Peter Maydell
2019-10-14 16:03 ` [PULL 31/68] target/arm/arm-semi: Factor out implementation of SYS_CLOSE Peter Maydell
2019-10-14 16:03 ` [PULL 32/68] target/arm/arm-semi: Factor out implementation of SYS_WRITE Peter Maydell
2019-10-14 16:03 ` [PULL 33/68] target/arm/arm-semi: Factor out implementation of SYS_READ Peter Maydell
2019-10-14 16:03 ` [PULL 34/68] target/arm/arm-semi: Factor out implementation of SYS_ISTTY Peter Maydell
2019-10-14 16:03 ` [PULL 35/68] target/arm/arm-semi: Factor out implementation of SYS_SEEK Peter Maydell
2019-10-14 16:03 ` [PULL 36/68] target/arm/arm-semi: Factor out implementation of SYS_FLEN Peter Maydell
2019-10-14 16:03 ` [PULL 37/68] target/arm/arm-semi: Implement support for semihosting feature detection Peter Maydell
2019-10-14 16:03 ` [PULL 38/68] target/arm/arm-semi: Implement SH_EXT_EXIT_EXTENDED extension Peter Maydell
2019-10-14 16:03 ` [PULL 39/68] target/arm/arm-semi: Implement SH_EXT_STDOUT_STDERR extension Peter Maydell
2019-10-14 16:03 ` [PULL 40/68] aspeed/wdt: Check correct register for clock source Peter Maydell
2019-10-14 16:03 ` [PULL 41/68] hw/sd/aspeed_sdhci: New device Peter Maydell
2019-10-14 16:03 ` [PULL 42/68] hw: aspeed_scu: Add AST2600 support Peter Maydell
2019-10-14 16:03 ` [PULL 43/68] aspeed/timer: Introduce an object class per SoC Peter Maydell
2019-10-14 16:03 ` [PULL 44/68] aspeed/timer: Add support for control register 3 Peter Maydell
2019-10-14 16:03 ` [PULL 45/68] aspeed/timer: Add AST2600 support Peter Maydell
2019-10-14 16:03 ` [PULL 46/68] aspeed/timer: Add support for IRQ status register on the AST2600 Peter Maydell
2019-10-14 16:03 ` [PULL 47/68] aspeed/sdmc: Introduce an object class per SoC Peter Maydell
2019-10-14 16:03 ` [PULL 48/68] aspeed/sdmc: Add AST2600 support Peter Maydell
2019-10-14 16:03 ` [PULL 49/68] watchdog/aspeed: Introduce an object class per SoC Peter Maydell
2019-10-14 16:03 ` Peter Maydell [this message]
2019-10-14 16:03 ` [PULL 51/68] aspeed/smc: Introduce segment operations Peter Maydell
2019-10-14 16:03 ` [PULL 52/68] aspeed/smc: Add AST2600 support Peter Maydell
2019-10-14 16:03 ` [PULL 53/68] hw/gpio: Add in AST2600 specific implementation Peter Maydell
2019-10-14 16:03 ` [PULL 54/68] aspeed/i2c: Introduce an object class per SoC Peter Maydell
2019-10-14 16:03 ` [PULL 55/68] aspeed/i2c: Add AST2600 support Peter Maydell
2019-10-14 16:03 ` [PULL 56/68] aspeed: Introduce an object class per SoC Peter Maydell
2019-10-14 16:03 ` [PULL 57/68] aspeed/soc: Add AST2600 support Peter Maydell
2019-10-14 16:03 ` [PULL 58/68] m25p80: Add support for w25q512jv Peter Maydell
2019-10-14 16:03 ` [PULL 59/68] aspeed: Add an AST2600 eval board Peter Maydell
2019-10-15 17:03 ` Peter Maydell
2019-10-15 17:43 ` Cédric Le Goater
2019-10-15 17:55 ` Peter Maydell
2019-10-16 11:28 ` Joel Stanley
2019-10-16 12:20 ` Philippe Mathieu-Daudé
2019-10-16 12:41 ` Cédric Le Goater
2019-10-16 12:44 ` Philippe Mathieu-Daudé
2019-10-14 16:03 ` [PULL 60/68] aspeed: Parameterise number of MACs Peter Maydell
2019-10-14 16:03 ` [PULL 61/68] aspeed: add support for the Aspeed MII controller of the AST2600 Peter Maydell
2019-10-14 16:03 ` [PULL 62/68] aspeed/soc: Add ASPEED Video stub Peter Maydell
2019-10-14 16:03 ` [PULL 63/68] hw/arm/raspi: Use the IEC binary prefix definitions Peter Maydell
2019-10-14 16:04 ` [PULL 64/68] hw/arm/bcm2835_peripherals: Improve logging Peter Maydell
2019-10-14 16:04 ` [PULL 65/68] hw/arm/bcm2835_peripherals: Name various address spaces Peter Maydell
2019-10-14 16:04 ` [PULL 66/68] hw/arm/bcm2835: Rename some definitions Peter Maydell
2019-10-14 16:04 ` [PULL 67/68] hw/arm/bcm2835: Add various unimplemented peripherals Peter Maydell
2019-10-14 16:04 ` [PULL 68/68] hw/misc/bcm2835_mbox: Add trace events Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191014160404.19553-51-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).