From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [PULL 67/68] hw/arm/bcm2835: Add various unimplemented peripherals
Date: Mon, 14 Oct 2019 17:04:03 +0100 [thread overview]
Message-ID: <20191014160404.19553-68-peter.maydell@linaro.org> (raw)
In-Reply-To: <20191014160404.19553-1-peter.maydell@linaro.org>
From: Philippe Mathieu-Daudé <f4bug@amsat.org>
Base addresses and sizes taken from the "BCM2835 ARM Peripherals"
datasheet from February 06 2012:
https://www.raspberrypi.org/app/uploads/2012/02/BCM2835-ARM-Peripherals.pdf
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190926173428.10713-6-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
include/hw/arm/bcm2835_peripherals.h | 15 ++++++++++++++
include/hw/arm/raspi_platform.h | 8 +++++++
hw/arm/bcm2835_peripherals.c | 31 ++++++++++++++++++++++++++++
3 files changed, 54 insertions(+)
diff --git a/include/hw/arm/bcm2835_peripherals.h b/include/hw/arm/bcm2835_peripherals.h
index 6b17f6a3827..62a4c7b559d 100644
--- a/include/hw/arm/bcm2835_peripherals.h
+++ b/include/hw/arm/bcm2835_peripherals.h
@@ -23,6 +23,7 @@
#include "hw/sd/sdhci.h"
#include "hw/sd/bcm2835_sdhost.h"
#include "hw/gpio/bcm2835_gpio.h"
+#include "hw/misc/unimp.h"
#define TYPE_BCM2835_PERIPHERALS "bcm2835-peripherals"
#define BCM2835_PERIPHERALS(obj) \
@@ -37,6 +38,10 @@ typedef struct BCM2835PeripheralState {
MemoryRegion ram_alias[4];
qemu_irq irq, fiq;
+ UnimplementedDeviceState systmr;
+ UnimplementedDeviceState armtmr;
+ UnimplementedDeviceState cprman;
+ UnimplementedDeviceState a2w;
PL011State uart0;
BCM2835AuxState aux;
BCM2835FBState fb;
@@ -48,6 +53,16 @@ typedef struct BCM2835PeripheralState {
SDHCIState sdhci;
BCM2835SDHostState sdhost;
BCM2835GpioState gpio;
+ UnimplementedDeviceState i2s;
+ UnimplementedDeviceState spi[1];
+ UnimplementedDeviceState i2c[3];
+ UnimplementedDeviceState otp;
+ UnimplementedDeviceState dbus;
+ UnimplementedDeviceState ave0;
+ UnimplementedDeviceState bscsl;
+ UnimplementedDeviceState smi;
+ UnimplementedDeviceState dwc2;
+ UnimplementedDeviceState sdramc;
} BCM2835PeripheralState;
#endif /* BCM2835_PERIPHERALS_H */
diff --git a/include/hw/arm/raspi_platform.h b/include/hw/arm/raspi_platform.h
index 66969fac5d2..cdcbca943fb 100644
--- a/include/hw/arm/raspi_platform.h
+++ b/include/hw/arm/raspi_platform.h
@@ -38,6 +38,8 @@
* Doorbells & Mailboxes */
#define CPRMAN_OFFSET 0x100000 /* Power Management, Watchdog */
#define CM_OFFSET 0x101000 /* Clock Management */
+#define A2W_OFFSET 0x102000 /* Reset controller */
+#define AVS_OFFSET 0x103000 /* Audio Video Standard */
#define RNG_OFFSET 0x104000
#define GPIO_OFFSET 0x200000
#define UART0_OFFSET 0x201000
@@ -45,11 +47,17 @@
#define I2S_OFFSET 0x203000
#define SPI0_OFFSET 0x204000
#define BSC0_OFFSET 0x205000 /* BSC0 I2C/TWI */
+#define OTP_OFFSET 0x20f000
+#define BSC_SL_OFFSET 0x214000 /* SPI slave */
#define AUX_OFFSET 0x215000 /* AUX: UART1/SPI1/SPI2 */
#define EMMC1_OFFSET 0x300000
#define SMI_OFFSET 0x600000
#define BSC1_OFFSET 0x804000 /* BSC1 I2C/TWI */
+#define BSC2_OFFSET 0x805000 /* BSC2 I2C/TWI */
+#define DBUS_OFFSET 0x900000
+#define AVE0_OFFSET 0x910000
#define USB_OTG_OFFSET 0x980000 /* DTC_OTG USB controller */
+#define SDRAMC_OFFSET 0xe00000
#define DMA15_OFFSET 0xE05000 /* DMA controller, channel 15 */
/* GPU interrupts */
diff --git a/hw/arm/bcm2835_peripherals.c b/hw/arm/bcm2835_peripherals.c
index 1bd2ff41d52..fdcf616c56a 100644
--- a/hw/arm/bcm2835_peripherals.c
+++ b/hw/arm/bcm2835_peripherals.c
@@ -22,6 +22,20 @@
/* Capabilities for SD controller: no DMA, high-speed, default clocks etc. */
#define BCM2835_SDHC_CAPAREG 0x52134b4
+static void create_unimp(BCM2835PeripheralState *ps,
+ UnimplementedDeviceState *uds,
+ const char *name, hwaddr ofs, hwaddr size)
+{
+ sysbus_init_child_obj(OBJECT(ps), name, uds,
+ sizeof(UnimplementedDeviceState),
+ TYPE_UNIMPLEMENTED_DEVICE);
+ qdev_prop_set_string(DEVICE(uds), "name", name);
+ qdev_prop_set_uint64(DEVICE(uds), "size", size);
+ object_property_set_bool(OBJECT(uds), true, "realized", &error_fatal);
+ memory_region_add_subregion_overlap(&ps->peri_mr, ofs,
+ sysbus_mmio_get_region(SYS_BUS_DEVICE(uds), 0), -1000);
+}
+
static void bcm2835_peripherals_init(Object *obj)
{
BCM2835PeripheralState *s = BCM2835_PERIPHERALS(obj);
@@ -323,6 +337,23 @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp)
error_propagate(errp, err);
return;
}
+
+ create_unimp(s, &s->armtmr, "bcm2835-sp804", ARMCTRL_TIMER0_1_OFFSET, 0x40);
+ create_unimp(s, &s->systmr, "bcm2835-systimer", ST_OFFSET, 0x20);
+ create_unimp(s, &s->cprman, "bcm2835-cprman", CPRMAN_OFFSET, 0x1000);
+ create_unimp(s, &s->a2w, "bcm2835-a2w", A2W_OFFSET, 0x1000);
+ create_unimp(s, &s->i2s, "bcm2835-i2s", I2S_OFFSET, 0x100);
+ create_unimp(s, &s->smi, "bcm2835-smi", SMI_OFFSET, 0x100);
+ create_unimp(s, &s->spi[0], "bcm2835-spi0", SPI0_OFFSET, 0x20);
+ create_unimp(s, &s->bscsl, "bcm2835-spis", BSC_SL_OFFSET, 0x100);
+ create_unimp(s, &s->i2c[0], "bcm2835-i2c0", BSC0_OFFSET, 0x20);
+ create_unimp(s, &s->i2c[1], "bcm2835-i2c1", BSC1_OFFSET, 0x20);
+ create_unimp(s, &s->i2c[2], "bcm2835-i2c2", BSC2_OFFSET, 0x20);
+ create_unimp(s, &s->otp, "bcm2835-otp", OTP_OFFSET, 0x80);
+ create_unimp(s, &s->dbus, "bcm2835-dbus", DBUS_OFFSET, 0x8000);
+ create_unimp(s, &s->ave0, "bcm2835-ave0", AVE0_OFFSET, 0x8000);
+ create_unimp(s, &s->dwc2, "dwc-usb2", USB_OTG_OFFSET, 0x1000);
+ create_unimp(s, &s->sdramc, "bcm2835-sdramc", SDRAMC_OFFSET, 0x100);
}
static void bcm2835_peripherals_class_init(ObjectClass *oc, void *data)
--
2.20.1
next prev parent reply other threads:[~2019-10-14 17:11 UTC|newest]
Thread overview: 76+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-14 16:02 [PULL 00/68] target-arm queue Peter Maydell
2019-10-14 16:02 ` [PULL 01/68] linux headers: update against v5.4-rc1 Peter Maydell
2019-10-14 16:02 ` [PULL 02/68] intc/arm_gic: Support IRQ injection for more than 256 vpus Peter Maydell
2019-10-14 16:02 ` [PULL 03/68] ARM: KVM: Check KVM_CAP_ARM_IRQ_LINE_LAYOUT_2 for smp_cpus > 256 Peter Maydell
2019-10-14 16:03 ` [PULL 04/68] ptimer: Rename ptimer_init() to ptimer_init_with_bh() Peter Maydell
2019-10-14 16:03 ` [PULL 05/68] ptimer: Provide new transaction-based API Peter Maydell
2019-10-14 16:03 ` [PULL 06/68] tests/ptimer-test: Switch to transaction-based ptimer API Peter Maydell
2019-10-14 16:03 ` [PULL 07/68] hw/timer/arm_timer.c: " Peter Maydell
2019-10-14 16:03 ` [PULL 08/68] hw/arm/musicpal.c: " Peter Maydell
2019-10-14 16:03 ` [PULL 09/68] hw/timer/allwinner-a10-pit.c: " Peter Maydell
2019-10-14 16:03 ` [PULL 10/68] hw/timer/arm_mptimer.c: " Peter Maydell
2019-10-14 16:03 ` [PULL 11/68] hw/timer/cmsdk-apb-dualtimer.c: " Peter Maydell
2019-10-14 16:03 ` [PULL 12/68] hw/timer/cmsdk-apb-timer.c: " Peter Maydell
2019-10-14 16:03 ` [PULL 13/68] hw/timer/digic-timer.c: " Peter Maydell
2019-10-14 16:03 ` [PULL 14/68] hw/timer/exynos4210_mct.c: Switch GFRC " Peter Maydell
2019-10-14 16:03 ` [PULL 15/68] hw/timer/exynos4210_mct.c: Switch LFRC " Peter Maydell
2019-10-14 16:03 ` [PULL 16/68] hw/timer/exynos4210_mct.c: Switch ltick " Peter Maydell
2019-10-14 16:03 ` [PULL 17/68] hw/timer/exynos4210_pwm.c: Switch " Peter Maydell
2019-10-14 16:03 ` [PULL 18/68] hw/timer/exynos4210_rtc.c: Switch 1Hz ptimer to transaction-based API Peter Maydell
2019-10-14 16:03 ` [PULL 19/68] hw/timer/exynos4210_rtc.c: Switch main " Peter Maydell
2019-10-14 16:03 ` [PULL 20/68] hw/timer/imx_epit.c: Switch to transaction-based ptimer API Peter Maydell
2019-10-14 16:03 ` [PULL 21/68] hw/timer/imx_gpt.c: " Peter Maydell
2019-10-14 16:03 ` [PULL 22/68] hw/timer/mss-timerc: " Peter Maydell
2019-10-14 16:03 ` [PULL 23/68] hw/watchdog/cmsdk-apb-watchdog.c: " Peter Maydell
2019-10-14 16:03 ` [PULL 24/68] hw/net/lan9118.c: " Peter Maydell
2019-10-14 16:03 ` [PULL 25/68] target/arm/arm-semi: Capture errno in softmmu version of set_swi_errno() Peter Maydell
2019-10-14 16:03 ` [PULL 26/68] target/arm/arm-semi: Always set some kind of errno for failed calls Peter Maydell
2019-10-14 16:03 ` [PULL 27/68] target/arm/arm-semi: Correct comment about gdb syscall races Peter Maydell
2019-10-14 16:03 ` [PULL 28/68] target/arm/arm-semi: Make semihosting code hand out its own file descriptors Peter Maydell
2019-10-14 16:03 ` [PULL 29/68] target/arm/arm-semi: Restrict use of TaskState* Peter Maydell
2019-10-14 16:03 ` [PULL 30/68] target/arm/arm-semi: Use set_swi_errno() in gdbstub callback functions Peter Maydell
2019-10-14 16:03 ` [PULL 31/68] target/arm/arm-semi: Factor out implementation of SYS_CLOSE Peter Maydell
2019-10-14 16:03 ` [PULL 32/68] target/arm/arm-semi: Factor out implementation of SYS_WRITE Peter Maydell
2019-10-14 16:03 ` [PULL 33/68] target/arm/arm-semi: Factor out implementation of SYS_READ Peter Maydell
2019-10-14 16:03 ` [PULL 34/68] target/arm/arm-semi: Factor out implementation of SYS_ISTTY Peter Maydell
2019-10-14 16:03 ` [PULL 35/68] target/arm/arm-semi: Factor out implementation of SYS_SEEK Peter Maydell
2019-10-14 16:03 ` [PULL 36/68] target/arm/arm-semi: Factor out implementation of SYS_FLEN Peter Maydell
2019-10-14 16:03 ` [PULL 37/68] target/arm/arm-semi: Implement support for semihosting feature detection Peter Maydell
2019-10-14 16:03 ` [PULL 38/68] target/arm/arm-semi: Implement SH_EXT_EXIT_EXTENDED extension Peter Maydell
2019-10-14 16:03 ` [PULL 39/68] target/arm/arm-semi: Implement SH_EXT_STDOUT_STDERR extension Peter Maydell
2019-10-14 16:03 ` [PULL 40/68] aspeed/wdt: Check correct register for clock source Peter Maydell
2019-10-14 16:03 ` [PULL 41/68] hw/sd/aspeed_sdhci: New device Peter Maydell
2019-10-14 16:03 ` [PULL 42/68] hw: aspeed_scu: Add AST2600 support Peter Maydell
2019-10-14 16:03 ` [PULL 43/68] aspeed/timer: Introduce an object class per SoC Peter Maydell
2019-10-14 16:03 ` [PULL 44/68] aspeed/timer: Add support for control register 3 Peter Maydell
2019-10-14 16:03 ` [PULL 45/68] aspeed/timer: Add AST2600 support Peter Maydell
2019-10-14 16:03 ` [PULL 46/68] aspeed/timer: Add support for IRQ status register on the AST2600 Peter Maydell
2019-10-14 16:03 ` [PULL 47/68] aspeed/sdmc: Introduce an object class per SoC Peter Maydell
2019-10-14 16:03 ` [PULL 48/68] aspeed/sdmc: Add AST2600 support Peter Maydell
2019-10-14 16:03 ` [PULL 49/68] watchdog/aspeed: Introduce an object class per SoC Peter Maydell
2019-10-14 16:03 ` [PULL 50/68] hw: wdt_aspeed: Add AST2600 support Peter Maydell
2019-10-14 16:03 ` [PULL 51/68] aspeed/smc: Introduce segment operations Peter Maydell
2019-10-14 16:03 ` [PULL 52/68] aspeed/smc: Add AST2600 support Peter Maydell
2019-10-14 16:03 ` [PULL 53/68] hw/gpio: Add in AST2600 specific implementation Peter Maydell
2019-10-14 16:03 ` [PULL 54/68] aspeed/i2c: Introduce an object class per SoC Peter Maydell
2019-10-14 16:03 ` [PULL 55/68] aspeed/i2c: Add AST2600 support Peter Maydell
2019-10-14 16:03 ` [PULL 56/68] aspeed: Introduce an object class per SoC Peter Maydell
2019-10-14 16:03 ` [PULL 57/68] aspeed/soc: Add AST2600 support Peter Maydell
2019-10-14 16:03 ` [PULL 58/68] m25p80: Add support for w25q512jv Peter Maydell
2019-10-14 16:03 ` [PULL 59/68] aspeed: Add an AST2600 eval board Peter Maydell
2019-10-15 17:03 ` Peter Maydell
2019-10-15 17:43 ` Cédric Le Goater
2019-10-15 17:55 ` Peter Maydell
2019-10-16 11:28 ` Joel Stanley
2019-10-16 12:20 ` Philippe Mathieu-Daudé
2019-10-16 12:41 ` Cédric Le Goater
2019-10-16 12:44 ` Philippe Mathieu-Daudé
2019-10-14 16:03 ` [PULL 60/68] aspeed: Parameterise number of MACs Peter Maydell
2019-10-14 16:03 ` [PULL 61/68] aspeed: add support for the Aspeed MII controller of the AST2600 Peter Maydell
2019-10-14 16:03 ` [PULL 62/68] aspeed/soc: Add ASPEED Video stub Peter Maydell
2019-10-14 16:03 ` [PULL 63/68] hw/arm/raspi: Use the IEC binary prefix definitions Peter Maydell
2019-10-14 16:04 ` [PULL 64/68] hw/arm/bcm2835_peripherals: Improve logging Peter Maydell
2019-10-14 16:04 ` [PULL 65/68] hw/arm/bcm2835_peripherals: Name various address spaces Peter Maydell
2019-10-14 16:04 ` [PULL 66/68] hw/arm/bcm2835: Rename some definitions Peter Maydell
2019-10-14 16:04 ` Peter Maydell [this message]
2019-10-14 16:04 ` [PULL 68/68] hw/misc/bcm2835_mbox: Add trace events Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191014160404.19553-68-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).