From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [PULL 39/41] hw/arm/omap2: Create the RAM in the board
Date: Tue, 22 Oct 2019 14:31:32 +0100 [thread overview]
Message-ID: <20191022133134.14487-40-peter.maydell@linaro.org> (raw)
In-Reply-To: <20191022133134.14487-1-peter.maydell@linaro.org>
From: Philippe Mathieu-Daudé <philmd@redhat.com>
The SDRAM is incorrectly created in the OMAP2420 SoC.
Move its creation in the board code, this will later allow the
board to have the QOM ownership of the RAM.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20191021190653.9511-5-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
include/hw/arm/omap.h | 4 +---
hw/arm/nseries.c | 10 +++++++---
hw/arm/omap2.c | 13 +++++--------
3 files changed, 13 insertions(+), 14 deletions(-)
diff --git a/include/hw/arm/omap.h b/include/hw/arm/omap.h
index 2fda9966484..763d8eab4fa 100644
--- a/include/hw/arm/omap.h
+++ b/include/hw/arm/omap.h
@@ -824,7 +824,6 @@ struct omap_mpu_state_s {
MemoryRegion tap_iomem;
MemoryRegion imif_ram;
MemoryRegion emiff_ram;
- MemoryRegion sdram;
MemoryRegion sram;
struct omap_dma_port_if_s {
@@ -938,8 +937,7 @@ struct omap_mpu_state_s *omap310_mpu_init(MemoryRegion *system_memory,
const char *core);
/* omap2.c */
-struct omap_mpu_state_s *omap2420_mpu_init(MemoryRegion *sysmem,
- unsigned long sdram_size,
+struct omap_mpu_state_s *omap2420_mpu_init(MemoryRegion *sdram,
const char *core);
uint32_t omap_badwidth_read8(void *opaque, hwaddr addr);
diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c
index a36971d39aa..7e361936a9d 100644
--- a/hw/arm/nseries.c
+++ b/hw/arm/nseries.c
@@ -47,6 +47,7 @@
/* Nokia N8x0 support */
struct n800_s {
+ MemoryRegion sdram;
struct omap_mpu_state_s *mpu;
struct rfbi_chip_s blizzard;
@@ -1311,11 +1312,14 @@ static int n810_atag_setup(const struct arm_boot_info *info, void *p)
static void n8x0_init(MachineState *machine,
struct arm_boot_info *binfo, int model)
{
- MemoryRegion *sysmem = get_system_memory();
struct n800_s *s = (struct n800_s *) g_malloc0(sizeof(*s));
- int sdram_size = binfo->ram_size;
+ uint64_t sdram_size = binfo->ram_size;
- s->mpu = omap2420_mpu_init(sysmem, sdram_size, machine->cpu_type);
+ memory_region_allocate_system_memory(&s->sdram, NULL, "omap2.dram",
+ sdram_size);
+ memory_region_add_subregion(get_system_memory(), OMAP2_Q2_BASE, &s->sdram);
+
+ s->mpu = omap2420_mpu_init(&s->sdram, machine->cpu_type);
/* Setup peripherals
*
diff --git a/hw/arm/omap2.c b/hw/arm/omap2.c
index bd7ddff9831..457f152baca 100644
--- a/hw/arm/omap2.c
+++ b/hw/arm/omap2.c
@@ -22,6 +22,7 @@
#include "qemu/error-report.h"
#include "qapi/error.h"
#include "cpu.h"
+#include "exec/address-spaces.h"
#include "sysemu/blockdev.h"
#include "sysemu/qtest.h"
#include "sysemu/reset.h"
@@ -2276,8 +2277,7 @@ static const struct dma_irq_map omap2_dma_irq_map[] = {
{ 0, OMAP_INT_24XX_SDMA_IRQ3 },
};
-struct omap_mpu_state_s *omap2420_mpu_init(MemoryRegion *sysmem,
- unsigned long sdram_size,
+struct omap_mpu_state_s *omap2420_mpu_init(MemoryRegion *sdram,
const char *cpu_type)
{
struct omap_mpu_state_s *s = g_new0(struct omap_mpu_state_s, 1);
@@ -2286,11 +2286,11 @@ struct omap_mpu_state_s *omap2420_mpu_init(MemoryRegion *sysmem,
int i;
SysBusDevice *busdev;
struct omap_target_agent_s *ta;
+ MemoryRegion *sysmem = get_system_memory();
/* Core */
s->mpu_model = omap2420;
s->cpu = ARM_CPU(cpu_create(cpu_type));
- s->sdram_size = sdram_size;
s->sram_size = OMAP242X_SRAM_SIZE;
s->wakeup = qemu_allocate_irq(omap_mpu_wakeup, s, 0);
@@ -2299,9 +2299,6 @@ struct omap_mpu_state_s *omap2420_mpu_init(MemoryRegion *sysmem,
omap_clk_init(s);
/* Memory-mapped stuff */
- memory_region_allocate_system_memory(&s->sdram, NULL, "omap2.dram",
- s->sdram_size);
- memory_region_add_subregion(sysmem, OMAP2_Q2_BASE, &s->sdram);
memory_region_init_ram(&s->sram, NULL, "omap2.sram", s->sram_size,
&error_fatal);
memory_region_add_subregion(sysmem, OMAP2_SRAM_BASE, &s->sram);
@@ -2338,8 +2335,8 @@ struct omap_mpu_state_s *omap2420_mpu_init(MemoryRegion *sysmem,
s->port->addr_valid = omap2_validate_addr;
/* Register SDRAM and SRAM ports for fast DMA transfers. */
- soc_dma_port_add_mem(s->dma, memory_region_get_ram_ptr(&s->sdram),
- OMAP2_Q2_BASE, s->sdram_size);
+ soc_dma_port_add_mem(s->dma, memory_region_get_ram_ptr(sdram),
+ OMAP2_Q2_BASE, memory_region_size(sdram));
soc_dma_port_add_mem(s->dma, memory_region_get_ram_ptr(&s->sram),
OMAP2_SRAM_BASE, s->sram_size);
--
2.20.1
next prev parent reply other threads:[~2019-10-22 13:57 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-22 13:30 [PULL 00/41] target-arm queue Peter Maydell
2019-10-22 13:30 ` [PULL 01/41] target/arm: Fix sign-extension for SMLAL* Peter Maydell
2019-10-22 13:30 ` [PULL 02/41] aspeed: Add an AST2600 eval board Peter Maydell
2019-10-22 13:30 ` [PULL 03/41] hw/timer/exynos4210_mct: Initialize ptimer before starting it Peter Maydell
2019-10-22 13:30 ` [PULL 04/41] hw/timer/arm_mptimer.c: Undo accidental rename of arm_mptimer_init() Peter Maydell
2019-10-22 13:30 ` [PULL 05/41] hw/timer/puv3_ost.c: Switch to transaction-based ptimer API Peter Maydell
2019-10-22 13:30 ` [PULL 06/41] hw/timer/sh_timer: " Peter Maydell
2019-10-22 13:31 ` [PULL 07/41] hw/timer/lm32_timer: " Peter Maydell
2019-10-22 13:31 ` [PULL 08/41] hw/timer/altera_timer.c: " Peter Maydell
2019-10-22 13:31 ` [PULL 09/41] hw/watchdog/etraxfs_timer.c: " Peter Maydell
2019-10-22 13:31 ` [PULL 10/41] hw/m68k/mcf5208.c: " Peter Maydell
2019-10-22 13:31 ` [PULL 11/41] target/arm: Split out rebuild_hflags_common Peter Maydell
2019-10-22 13:31 ` [PULL 12/41] target/arm: Split out rebuild_hflags_a64 Peter Maydell
2019-10-22 13:31 ` [PULL 13/41] target/arm: Split out rebuild_hflags_common_32 Peter Maydell
2019-10-22 13:31 ` [PULL 14/41] target/arm: Split arm_cpu_data_is_big_endian Peter Maydell
2019-10-22 13:31 ` [PULL 15/41] target/arm: Split out rebuild_hflags_m32 Peter Maydell
2019-10-22 13:31 ` [PULL 16/41] target/arm: Reduce tests vs M-profile in cpu_get_tb_cpu_state Peter Maydell
2019-10-22 13:31 ` [PULL 17/41] target/arm: Split out rebuild_hflags_a32 Peter Maydell
2019-10-22 13:31 ` [PULL 18/41] target/arm: Split out rebuild_hflags_aprofile Peter Maydell
2019-10-22 13:31 ` [PULL 19/41] target/arm: Hoist XSCALE_CPAR, VECLEN, VECSTRIDE in cpu_get_tb_cpu_state Peter Maydell
2019-10-22 13:31 ` [PULL 20/41] target/arm: Simplify set of PSTATE_SS " Peter Maydell
2019-10-22 13:31 ` [PULL 21/41] target/arm: Hoist computation of TBFLAG_A32.VFPEN Peter Maydell
2019-10-22 13:31 ` [PULL 22/41] target/arm: Add arm_rebuild_hflags Peter Maydell
2019-10-22 13:31 ` [PULL 23/41] target/arm: Split out arm_mmu_idx_el Peter Maydell
2019-10-22 13:31 ` [PULL 24/41] target/arm: Hoist store to cs_base in cpu_get_tb_cpu_state Peter Maydell
2019-10-22 13:31 ` [PULL 25/41] target/arm: Add HELPER(rebuild_hflags_{a32, a64, m32}) Peter Maydell
2019-10-22 13:31 ` [PULL 26/41] target/arm: Rebuild hflags at EL changes Peter Maydell
2019-10-22 13:31 ` [PULL 27/41] target/arm: Rebuild hflags at MSR writes Peter Maydell
2019-10-22 13:31 ` [PULL 28/41] target/arm: Rebuild hflags at CPSR writes Peter Maydell
2019-10-22 13:31 ` [PULL 29/41] target/arm: Rebuild hflags at Xscale SCTLR writes Peter Maydell
2019-10-22 13:31 ` [PULL 30/41] target/arm: Rebuild hflags for M-profile Peter Maydell
2019-10-22 13:31 ` [PULL 31/41] target/arm: Rebuild hflags for M-profile NVIC Peter Maydell
2019-10-22 13:31 ` [PULL 32/41] target/arm: Rely on hflags correct in cpu_get_tb_cpu_state Peter Maydell
2019-10-22 13:31 ` [PULL 33/41] hw/sd/sdhci: Add a comment to distinct the i.MX eSDHC functions Peter Maydell
2019-10-22 13:31 ` [PULL 34/41] hw/sd/sdhci: Add dummy Samsung SDHCI controller Peter Maydell
2019-10-22 13:31 ` [PULL 35/41] hw/arm/exynos4210: Use the Samsung s3c " Peter Maydell
2019-10-22 13:31 ` [PULL 36/41] hw/arm/xilinx_zynq: Use the IEC binary prefix definitions Peter Maydell
2019-10-22 13:31 ` [PULL 37/41] hw/arm/mps2: " Peter Maydell
2019-10-22 13:31 ` [PULL 38/41] hw/arm/collie: Create the RAM in the board Peter Maydell
2019-10-22 13:31 ` Peter Maydell [this message]
2019-10-22 13:31 ` [PULL 40/41] hw/arm/omap1: " Peter Maydell
2019-10-22 13:31 ` [PULL 41/41] hw/arm/digic4: Inline digic4_board_setup_ram() function Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191022133134.14487-40-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).