From: Stefan Hajnoczi <stefanha@redhat.com>
To: qemu-devel@nongnu.org
Cc: Fam Zheng <fam@euphon.net>, Laurent Vivier <lvivier@redhat.com>,
Thomas Huth <thuth@redhat.com>,
qemu-block@nongnu.org, slp@redhat.com,
"Michael S. Tsirkin" <mst@redhat.com>,
Cornelia Huck <cohuck@redhat.com>,
Stefan Hajnoczi <stefanha@redhat.com>,
Christophe de Dinechin <dinechin@redhat.com>,
Paolo Bonzini <pbonzini@redhat.com>,
Richard Henderson <rth@twiddle.net>
Subject: [PATCH v4 12/16] libqos: add MSI-X callbacks to QVirtioPCIDevice
Date: Wed, 23 Oct 2019 11:04:21 +0100 [thread overview]
Message-ID: <20191023100425.12168-13-stefanha@redhat.com> (raw)
In-Reply-To: <20191023100425.12168-1-stefanha@redhat.com>
The MSI-X vectors are programmed differently in the VIRTIO 1.0 and
Legacy interfaces. Introduce callbacks so different implementations can
be used depending on the interface version.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
tests/libqos/virtio-pci.h | 12 ++++++++++++
tests/libqos/virtio-pci.c | 37 ++++++++++++++++++++++++++++---------
2 files changed, 40 insertions(+), 9 deletions(-)
diff --git a/tests/libqos/virtio-pci.h b/tests/libqos/virtio-pci.h
index 728b4715f1..4299efc023 100644
--- a/tests/libqos/virtio-pci.h
+++ b/tests/libqos/virtio-pci.h
@@ -14,16 +14,28 @@
#include "libqos/pci.h"
#include "libqos/qgraph.h"
+typedef struct QVirtioPCIMSIXOps QVirtioPCIMSIXOps;
+
typedef struct QVirtioPCIDevice {
QOSGraphObject obj;
QVirtioDevice vdev;
QPCIDevice *pdev;
QPCIBar bar;
+ const QVirtioPCIMSIXOps *msix_ops;
uint16_t config_msix_entry;
uint64_t config_msix_addr;
uint32_t config_msix_data;
} QVirtioPCIDevice;
+struct QVirtioPCIMSIXOps {
+ /* Set the Configuration Vector for MSI-X */
+ void (*set_config_vector)(QVirtioPCIDevice *d, uint16_t entry);
+
+ /* Set the Queue Vector for MSI-X */
+ void (*set_queue_vector)(QVirtioPCIDevice *d, uint16_t vq_idx,
+ uint16_t entry);
+};
+
typedef struct QVirtQueuePCI {
QVirtQueue vq;
uint16_t msix_entry;
diff --git a/tests/libqos/virtio-pci.c b/tests/libqos/virtio-pci.c
index e4fa318dcc..0725777a8d 100644
--- a/tests/libqos/virtio-pci.c
+++ b/tests/libqos/virtio-pci.c
@@ -281,6 +281,31 @@ const QVirtioBus qvirtio_pci = {
.virtqueue_kick = qvirtio_pci_virtqueue_kick,
};
+static void qvirtio_pci_set_config_vector(QVirtioPCIDevice *d, uint16_t entry)
+{
+ uint16_t vector;
+
+ qpci_io_writew(d->pdev, d->bar, VIRTIO_MSI_CONFIG_VECTOR, entry);
+ vector = qpci_io_readw(d->pdev, d->bar, VIRTIO_MSI_CONFIG_VECTOR);
+ g_assert_cmphex(vector, !=, VIRTIO_MSI_NO_VECTOR);
+}
+
+static void qvirtio_pci_set_queue_vector(QVirtioPCIDevice *d, uint16_t vq_idx,
+ uint16_t entry)
+{
+ uint16_t vector;
+
+ qvirtio_pci_queue_select(&d->vdev, vq_idx);
+ qpci_io_writew(d->pdev, d->bar, VIRTIO_MSI_QUEUE_VECTOR, entry);
+ vector = qpci_io_readw(d->pdev, d->bar, VIRTIO_MSI_QUEUE_VECTOR);
+ g_assert_cmphex(vector, !=, VIRTIO_MSI_NO_VECTOR);
+}
+
+static const QVirtioPCIMSIXOps qvirtio_pci_msix_ops_legacy = {
+ .set_config_vector = qvirtio_pci_set_config_vector,
+ .set_queue_vector = qvirtio_pci_set_queue_vector,
+};
+
void qvirtio_pci_device_enable(QVirtioPCIDevice *d)
{
qpci_device_enable(d->pdev);
@@ -295,7 +320,6 @@ void qvirtio_pci_device_disable(QVirtioPCIDevice *d)
void qvirtqueue_pci_msix_setup(QVirtioPCIDevice *d, QVirtQueuePCI *vqpci,
QGuestAllocator *alloc, uint16_t entry)
{
- uint16_t vector;
uint32_t control;
uint64_t off;
@@ -321,16 +345,12 @@ void qvirtqueue_pci_msix_setup(QVirtioPCIDevice *d, QVirtQueuePCI *vqpci,
off + PCI_MSIX_ENTRY_VECTOR_CTRL,
control & ~PCI_MSIX_ENTRY_CTRL_MASKBIT);
- qvirtio_pci_queue_select(&d->vdev, vqpci->vq.index);
- qpci_io_writew(d->pdev, d->bar, VIRTIO_MSI_QUEUE_VECTOR, entry);
- vector = qpci_io_readw(d->pdev, d->bar, VIRTIO_MSI_QUEUE_VECTOR);
- g_assert_cmphex(vector, !=, VIRTIO_MSI_NO_VECTOR);
+ d->msix_ops->set_queue_vector(d, vqpci->vq.index, entry);
}
void qvirtio_pci_set_msix_configuration_vector(QVirtioPCIDevice *d,
QGuestAllocator *alloc, uint16_t entry)
{
- uint16_t vector;
uint32_t control;
uint64_t off;
@@ -358,9 +378,7 @@ void qvirtio_pci_set_msix_configuration_vector(QVirtioPCIDevice *d,
off + PCI_MSIX_ENTRY_VECTOR_CTRL,
control & ~PCI_MSIX_ENTRY_CTRL_MASKBIT);
- qpci_io_writew(d->pdev, d->bar, VIRTIO_MSI_CONFIG_VECTOR, entry);
- vector = qpci_io_readw(d->pdev, d->bar, VIRTIO_MSI_CONFIG_VECTOR);
- g_assert_cmphex(vector, !=, VIRTIO_MSI_NO_VECTOR);
+ d->msix_ops->set_config_vector(d, entry);
}
void qvirtio_pci_destructor(QOSGraphObject *obj)
@@ -383,6 +401,7 @@ static void qvirtio_pci_init_from_pcidev(QVirtioPCIDevice *dev, QPCIDevice *pci_
dev->vdev.device_type = qpci_config_readw(pci_dev, PCI_SUBSYSTEM_ID);
dev->config_msix_entry = -1;
+ dev->msix_ops = &qvirtio_pci_msix_ops_legacy;
dev->vdev.bus = &qvirtio_pci;
dev->vdev.big_endian = qvirtio_pci_is_big_endian(dev);
--
2.21.0
next prev parent reply other threads:[~2019-10-23 10:31 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-23 10:04 [PATCH v4 00/16] libqos: add VIRTIO PCI 1.0 support Stefan Hajnoczi
2019-10-23 10:04 ` [PATCH v4 01/16] tests/virtio-blk-test: read config space after feature negotiation Stefan Hajnoczi
2019-10-23 10:04 ` [PATCH v4 02/16] libqos: read QVIRTIO_MMIO_VERSION register Stefan Hajnoczi
2019-10-23 10:04 ` [PATCH v4 03/16] libqos: extend feature bits to 64-bit Stefan Hajnoczi
2019-10-23 10:04 ` [PATCH v4 04/16] virtio-scsi-test: add missing feature negotiation Stefan Hajnoczi
2019-10-23 10:19 ` Thomas Huth
2019-10-23 10:04 ` [PATCH v4 05/16] tests/virtio-blk-test: set up virtqueue after " Stefan Hajnoczi
2019-10-23 10:04 ` [PATCH v4 06/16] libqos: add missing virtio-9p " Stefan Hajnoczi
2019-10-23 10:20 ` Thomas Huth
2019-10-23 10:04 ` [PATCH v4 07/16] libqos: enforce Device Initialization order Stefan Hajnoczi
2019-10-23 11:23 ` Thomas Huth
2019-10-23 10:04 ` [PATCH v4 08/16] libqos: implement VIRTIO 1.0 FEATURES_OK step Stefan Hajnoczi
2019-10-23 11:04 ` Thomas Huth
2019-10-23 10:04 ` [PATCH v4 09/16] libqos: access VIRTIO 1.0 vring in little-endian Stefan Hajnoczi
2019-10-23 10:04 ` [PATCH v4 10/16] libqos: add iteration support to qpci_find_capability() Stefan Hajnoczi
2019-10-23 10:04 ` [PATCH v4 11/16] libqos: pass full QVirtQueue to set_queue_address() Stefan Hajnoczi
2019-10-23 10:04 ` Stefan Hajnoczi [this message]
2019-10-23 10:04 ` [PATCH v4 13/16] libqos: expose common virtqueue setup/cleanup functions Stefan Hajnoczi
2019-10-23 10:04 ` [PATCH v4 14/16] libqos: make the virtio-pci BAR index configurable Stefan Hajnoczi
2019-10-23 10:04 ` [PATCH v4 15/16] libqos: extract Legacy virtio-pci.c code Stefan Hajnoczi
2019-10-23 10:04 ` [PATCH v4 16/16] libqos: add VIRTIO PCI 1.0 support Stefan Hajnoczi
2019-10-23 11:22 ` Thomas Huth
2019-10-25 11:32 ` [PATCH v4 00/16] " Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191023100425.12168-13-stefanha@redhat.com \
--to=stefanha@redhat.com \
--cc=cohuck@redhat.com \
--cc=dinechin@redhat.com \
--cc=fam@euphon.net \
--cc=lvivier@redhat.com \
--cc=mst@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=rth@twiddle.net \
--cc=slp@redhat.com \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).