From: Stefan Hajnoczi <stefanha@redhat.com>
To: qemu-devel@nongnu.org
Cc: Fam Zheng <fam@euphon.net>, Laurent Vivier <lvivier@redhat.com>,
Thomas Huth <thuth@redhat.com>,
qemu-block@nongnu.org, slp@redhat.com,
"Michael S. Tsirkin" <mst@redhat.com>,
Cornelia Huck <cohuck@redhat.com>,
Stefan Hajnoczi <stefanha@redhat.com>,
Christophe de Dinechin <dinechin@redhat.com>,
Paolo Bonzini <pbonzini@redhat.com>,
Richard Henderson <rth@twiddle.net>
Subject: [PATCH v4 01/16] tests/virtio-blk-test: read config space after feature negotiation
Date: Wed, 23 Oct 2019 11:04:10 +0100 [thread overview]
Message-ID: <20191023100425.12168-2-stefanha@redhat.com> (raw)
In-Reply-To: <20191023100425.12168-1-stefanha@redhat.com>
The VIRTIO Configuration Space cannot be accessed before device feature
bits have been read because a driver doesn't know the endianness until
it has checked VIRTIO_F_VERSION_1.
Fix this problem in preparation for VIRTIO 1.0 support.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
tests/virtio-blk-test.c | 33 ++++++++++++++++++++-------------
1 file changed, 20 insertions(+), 13 deletions(-)
diff --git a/tests/virtio-blk-test.c b/tests/virtio-blk-test.c
index ed13167392..f6674fb233 100644
--- a/tests/virtio-blk-test.c
+++ b/tests/virtio-blk-test.c
@@ -125,10 +125,6 @@ static void test_basic(QVirtioDevice *dev, QGuestAllocator *alloc,
char *data;
QTestState *qts = global_qtest;
- capacity = qvirtio_config_readq(dev, 0);
-
- g_assert_cmpint(capacity, ==, TEST_IMAGE_SIZE / 512);
-
features = qvirtio_get_features(dev);
features = features & ~(QVIRTIO_F_BAD_FEATURE |
(1u << VIRTIO_RING_F_INDIRECT_DESC) |
@@ -136,6 +132,9 @@ static void test_basic(QVirtioDevice *dev, QGuestAllocator *alloc,
(1u << VIRTIO_BLK_F_SCSI));
qvirtio_set_features(dev, features);
+ capacity = qvirtio_config_readq(dev, 0);
+ g_assert_cmpint(capacity, ==, TEST_IMAGE_SIZE / 512);
+
qvirtio_set_driver_ok(dev);
/* Write and read with 3 descriptor layout */
@@ -359,9 +358,6 @@ static void indirect(void *obj, void *u_data, QGuestAllocator *t_alloc)
char *data;
QTestState *qts = global_qtest;
- capacity = qvirtio_config_readq(dev, 0);
- g_assert_cmpint(capacity, ==, TEST_IMAGE_SIZE / 512);
-
features = qvirtio_get_features(dev);
g_assert_cmphex(features & (1u << VIRTIO_RING_F_INDIRECT_DESC), !=, 0);
features = features & ~(QVIRTIO_F_BAD_FEATURE |
@@ -369,6 +365,9 @@ static void indirect(void *obj, void *u_data, QGuestAllocator *t_alloc)
(1u << VIRTIO_BLK_F_SCSI));
qvirtio_set_features(dev, features);
+ capacity = qvirtio_config_readq(dev, 0);
+ g_assert_cmpint(capacity, ==, TEST_IMAGE_SIZE / 512);
+
vq = qvirtqueue_setup(dev, t_alloc, 0);
qvirtio_set_driver_ok(dev);
@@ -434,8 +433,16 @@ static void config(void *obj, void *data, QGuestAllocator *t_alloc)
QVirtioBlk *blk_if = obj;
QVirtioDevice *dev = blk_if->vdev;
int n_size = TEST_IMAGE_SIZE / 2;
+ uint64_t features;
uint64_t capacity;
+ features = qvirtio_get_features(dev);
+ features = features & ~(QVIRTIO_F_BAD_FEATURE |
+ (1u << VIRTIO_RING_F_INDIRECT_DESC) |
+ (1u << VIRTIO_RING_F_EVENT_IDX) |
+ (1u << VIRTIO_BLK_F_SCSI));
+ qvirtio_set_features(dev, features);
+
capacity = qvirtio_config_readq(dev, 0);
g_assert_cmpint(capacity, ==, TEST_IMAGE_SIZE / 512);
@@ -475,9 +482,6 @@ static void msix(void *obj, void *u_data, QGuestAllocator *t_alloc)
qpci_msix_enable(pdev->pdev);
qvirtio_pci_set_msix_configuration_vector(pdev, t_alloc, 0);
- capacity = qvirtio_config_readq(dev, 0);
- g_assert_cmpint(capacity, ==, TEST_IMAGE_SIZE / 512);
-
features = qvirtio_get_features(dev);
features = features & ~(QVIRTIO_F_BAD_FEATURE |
(1u << VIRTIO_RING_F_INDIRECT_DESC) |
@@ -485,6 +489,9 @@ static void msix(void *obj, void *u_data, QGuestAllocator *t_alloc)
(1u << VIRTIO_BLK_F_SCSI));
qvirtio_set_features(dev, features);
+ capacity = qvirtio_config_readq(dev, 0);
+ g_assert_cmpint(capacity, ==, TEST_IMAGE_SIZE / 512);
+
vq = qvirtqueue_setup(dev, t_alloc, 0);
qvirtqueue_pci_msix_setup(pdev, (QVirtQueuePCI *)vq, t_alloc, 1);
@@ -584,9 +591,6 @@ static void idx(void *obj, void *u_data, QGuestAllocator *t_alloc)
qpci_msix_enable(pdev->pdev);
qvirtio_pci_set_msix_configuration_vector(pdev, t_alloc, 0);
- capacity = qvirtio_config_readq(dev, 0);
- g_assert_cmpint(capacity, ==, TEST_IMAGE_SIZE / 512);
-
features = qvirtio_get_features(dev);
features = features & ~(QVIRTIO_F_BAD_FEATURE |
(1u << VIRTIO_RING_F_INDIRECT_DESC) |
@@ -594,6 +598,9 @@ static void idx(void *obj, void *u_data, QGuestAllocator *t_alloc)
(1u << VIRTIO_BLK_F_SCSI));
qvirtio_set_features(dev, features);
+ capacity = qvirtio_config_readq(dev, 0);
+ g_assert_cmpint(capacity, ==, TEST_IMAGE_SIZE / 512);
+
vq = qvirtqueue_setup(dev, t_alloc, 0);
qvirtqueue_pci_msix_setup(pdev, (QVirtQueuePCI *)vq, t_alloc, 1);
--
2.21.0
next prev parent reply other threads:[~2019-10-23 10:11 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-23 10:04 [PATCH v4 00/16] libqos: add VIRTIO PCI 1.0 support Stefan Hajnoczi
2019-10-23 10:04 ` Stefan Hajnoczi [this message]
2019-10-23 10:04 ` [PATCH v4 02/16] libqos: read QVIRTIO_MMIO_VERSION register Stefan Hajnoczi
2019-10-23 10:04 ` [PATCH v4 03/16] libqos: extend feature bits to 64-bit Stefan Hajnoczi
2019-10-23 10:04 ` [PATCH v4 04/16] virtio-scsi-test: add missing feature negotiation Stefan Hajnoczi
2019-10-23 10:19 ` Thomas Huth
2019-10-23 10:04 ` [PATCH v4 05/16] tests/virtio-blk-test: set up virtqueue after " Stefan Hajnoczi
2019-10-23 10:04 ` [PATCH v4 06/16] libqos: add missing virtio-9p " Stefan Hajnoczi
2019-10-23 10:20 ` Thomas Huth
2019-10-23 10:04 ` [PATCH v4 07/16] libqos: enforce Device Initialization order Stefan Hajnoczi
2019-10-23 11:23 ` Thomas Huth
2019-10-23 10:04 ` [PATCH v4 08/16] libqos: implement VIRTIO 1.0 FEATURES_OK step Stefan Hajnoczi
2019-10-23 11:04 ` Thomas Huth
2019-10-23 10:04 ` [PATCH v4 09/16] libqos: access VIRTIO 1.0 vring in little-endian Stefan Hajnoczi
2019-10-23 10:04 ` [PATCH v4 10/16] libqos: add iteration support to qpci_find_capability() Stefan Hajnoczi
2019-10-23 10:04 ` [PATCH v4 11/16] libqos: pass full QVirtQueue to set_queue_address() Stefan Hajnoczi
2019-10-23 10:04 ` [PATCH v4 12/16] libqos: add MSI-X callbacks to QVirtioPCIDevice Stefan Hajnoczi
2019-10-23 10:04 ` [PATCH v4 13/16] libqos: expose common virtqueue setup/cleanup functions Stefan Hajnoczi
2019-10-23 10:04 ` [PATCH v4 14/16] libqos: make the virtio-pci BAR index configurable Stefan Hajnoczi
2019-10-23 10:04 ` [PATCH v4 15/16] libqos: extract Legacy virtio-pci.c code Stefan Hajnoczi
2019-10-23 10:04 ` [PATCH v4 16/16] libqos: add VIRTIO PCI 1.0 support Stefan Hajnoczi
2019-10-23 11:22 ` Thomas Huth
2019-10-25 11:32 ` [PATCH v4 00/16] " Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191023100425.12168-2-stefanha@redhat.com \
--to=stefanha@redhat.com \
--cc=cohuck@redhat.com \
--cc=dinechin@redhat.com \
--cc=fam@euphon.net \
--cc=lvivier@redhat.com \
--cc=mst@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=rth@twiddle.net \
--cc=slp@redhat.com \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).