From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Laurent Vivier" <lvivier@redhat.com>,
"Peter Maydell" <peter.maydell@linaro.org>,
"Thomas Huth" <thuth@redhat.com>, "Sergio Lopez" <slp@redhat.com>,
"Stefan Hajnoczi" <stefanha@redhat.com>,
"Paolo Bonzini" <pbonzini@redhat.com>,
"Philippe Mathieu-Daudé" <philmd@redhat.com>
Subject: [PULL 19/25] libqos: pass full QVirtQueue to set_queue_address()
Date: Sat, 26 Oct 2019 17:52:48 -0400 [thread overview]
Message-ID: <20191026193824.11926-20-mst@redhat.com> (raw)
In-Reply-To: <20191026193824.11926-1-mst@redhat.com>
From: Stefan Hajnoczi <stefanha@redhat.com>
Instead of just passing the vring page frame number, pass the full
QVirtQueue. This will allow the VIRTIO 1.0 transport to program the
fine-grained vring address registers in the future.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191023100425.12168-12-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
tests/libqos/virtio-mmio.c | 6 ++++--
tests/libqos/virtio-pci.c | 6 ++++--
tests/libqos/virtio.h | 2 +-
3 files changed, 9 insertions(+), 5 deletions(-)
diff --git a/tests/libqos/virtio-mmio.c b/tests/libqos/virtio-mmio.c
index 4db1f1b8bc..e0a2bd7bc6 100644
--- a/tests/libqos/virtio-mmio.c
+++ b/tests/libqos/virtio-mmio.c
@@ -143,9 +143,11 @@ static uint16_t qvirtio_mmio_get_queue_size(QVirtioDevice *d)
return (uint16_t)qtest_readl(dev->qts, dev->addr + QVIRTIO_MMIO_QUEUE_NUM_MAX);
}
-static void qvirtio_mmio_set_queue_address(QVirtioDevice *d, uint32_t pfn)
+static void qvirtio_mmio_set_queue_address(QVirtioDevice *d, QVirtQueue *vq)
{
QVirtioMMIODevice *dev = container_of(d, QVirtioMMIODevice, vdev);
+ uint64_t pfn = vq->desc / dev->page_size;
+
qtest_writel(dev->qts, dev->addr + QVIRTIO_MMIO_QUEUE_PFN, pfn);
}
@@ -179,7 +181,7 @@ static QVirtQueue *qvirtio_mmio_virtqueue_setup(QVirtioDevice *d,
addr = guest_alloc(alloc, qvring_size(vq->size, dev->page_size));
qvring_init(dev->qts, alloc, vq, addr);
- qvirtio_mmio_set_queue_address(d, vq->desc / dev->page_size);
+ qvirtio_mmio_set_queue_address(d, vq);
return vq;
}
diff --git a/tests/libqos/virtio-pci.c b/tests/libqos/virtio-pci.c
index 7ecf5d0a52..e4fa318dcc 100644
--- a/tests/libqos/virtio-pci.c
+++ b/tests/libqos/virtio-pci.c
@@ -199,9 +199,11 @@ static uint16_t qvirtio_pci_get_queue_size(QVirtioDevice *d)
return qpci_io_readw(dev->pdev, dev->bar, VIRTIO_PCI_QUEUE_NUM);
}
-static void qvirtio_pci_set_queue_address(QVirtioDevice *d, uint32_t pfn)
+static void qvirtio_pci_set_queue_address(QVirtioDevice *d, QVirtQueue *vq)
{
QVirtioPCIDevice *dev = container_of(d, QVirtioPCIDevice, vdev);
+ uint64_t pfn = vq->desc / VIRTIO_PCI_VRING_ALIGN;
+
qpci_io_writel(dev->pdev, dev->bar, VIRTIO_PCI_QUEUE_PFN, pfn);
}
@@ -239,7 +241,7 @@ static QVirtQueue *qvirtio_pci_virtqueue_setup(QVirtioDevice *d,
addr = guest_alloc(alloc, qvring_size(vqpci->vq.size,
VIRTIO_PCI_VRING_ALIGN));
qvring_init(qvpcidev->pdev->bus->qts, alloc, &vqpci->vq, addr);
- qvirtio_pci_set_queue_address(d, vqpci->vq.desc / VIRTIO_PCI_VRING_ALIGN);
+ qvirtio_pci_set_queue_address(d, &vqpci->vq);
return &vqpci->vq;
}
diff --git a/tests/libqos/virtio.h b/tests/libqos/virtio.h
index ebbff5193b..529ef7555a 100644
--- a/tests/libqos/virtio.h
+++ b/tests/libqos/virtio.h
@@ -81,7 +81,7 @@ struct QVirtioBus {
uint16_t (*get_queue_size)(QVirtioDevice *d);
/* Set the address of the selected queue */
- void (*set_queue_address)(QVirtioDevice *d, uint32_t pfn);
+ void (*set_queue_address)(QVirtioDevice *d, QVirtQueue *vq);
/* Setup the virtqueue specified by index */
QVirtQueue *(*virtqueue_setup)(QVirtioDevice *d, QGuestAllocator *alloc,
--
MST
next prev parent reply other threads:[~2019-10-26 21:55 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-26 19:39 [PULL 00/25] virtio: features, tests Michael S. Tsirkin
2019-10-26 19:39 ` [PULL 01/25] virtio: basic structure for packed ring Michael S. Tsirkin
2019-10-26 19:39 ` [PULL 02/25] virtio: device/driver area size calculation refactor for split ring Michael S. Tsirkin
2019-10-26 19:39 ` [PULL 03/25] virtio: Free blk virqueues at unrealize() Michael S. Tsirkin
2019-10-26 19:39 ` [PULL 04/25] virtio: Free rnd virqueue " Michael S. Tsirkin
2019-10-26 19:39 ` [PULL 05/25] virtio: basic packed virtqueue support Michael S. Tsirkin
2019-10-26 19:39 ` [PULL 06/25] virtio: event suppression support for packed ring Michael S. Tsirkin
2019-10-26 19:39 ` [PULL 07/25] vhost_net: enable packed ring support Michael S. Tsirkin
2019-10-26 19:39 ` [PULL 08/25] virtio: add property to enable packed virtqueue Michael S. Tsirkin
2019-10-26 19:39 ` [PULL 09/25] tests/virtio-blk-test: read config space after feature negotiation Michael S. Tsirkin
2019-10-26 19:40 ` [PULL 10/25] libqos: read QVIRTIO_MMIO_VERSION register Michael S. Tsirkin
2019-10-26 19:40 ` [PULL 11/25] libqos: extend feature bits to 64-bit Michael S. Tsirkin
2019-10-26 21:52 ` [PULL 16/25] libqos: implement VIRTIO 1.0 FEATURES_OK step Michael S. Tsirkin
2019-10-26 21:52 ` [PULL 17/25] libqos: access VIRTIO 1.0 vring in little-endian Michael S. Tsirkin
2019-10-26 21:52 ` [PULL 18/25] libqos: add iteration support to qpci_find_capability() Michael S. Tsirkin
2019-10-26 21:52 ` Michael S. Tsirkin [this message]
2019-10-26 21:52 ` [PULL 20/25] libqos: add MSI-X callbacks to QVirtioPCIDevice Michael S. Tsirkin
2019-10-26 21:52 ` [PULL 21/25] libqos: expose common virtqueue setup/cleanup functions Michael S. Tsirkin
2019-10-26 21:53 ` [PULL 22/25] libqos: make the virtio-pci BAR index configurable Michael S. Tsirkin
2019-10-26 21:53 ` [PULL 23/25] libqos: extract Legacy virtio-pci.c code Michael S. Tsirkin
2019-10-26 21:53 ` [PULL 24/25] libqos: add VIRTIO PCI 1.0 support Michael S. Tsirkin
2019-10-26 21:53 ` [PULL 25/25] virtio: drop unused virtio_device_stop_ioeventfd() function Michael S. Tsirkin
2019-10-28 14:38 ` [PULL 00/25] virtio: features, tests Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191026193824.11926-20-mst@redhat.com \
--to=mst@redhat.com \
--cc=lvivier@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=philmd@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=slp@redhat.com \
--cc=stefanha@redhat.com \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).