From: Max Reitz <mreitz@redhat.com>
To: qemu-block@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>,
Peter Maydell <peter.maydell@linaro.org>,
qemu-devel@nongnu.org, Max Reitz <mreitz@redhat.com>
Subject: [PULL 44/69] mirror: Do not dereference invalid pointers
Date: Mon, 28 Oct 2019 13:14:36 +0100 [thread overview]
Message-ID: <20191028121501.15279-45-mreitz@redhat.com> (raw)
In-Reply-To: <20191028121501.15279-1-mreitz@redhat.com>
mirror_exit_common() may be called twice (if it is called from
mirror_prepare() and fails, it will be called from mirror_abort()
again).
In such a case, many of the pointers in the MirrorBlockJob object will
already be freed. This can be seen most reliably for s->target, which
is set to NULL (and then dereferenced by blk_bs()).
Cc: qemu-stable@nongnu.org
Fixes: 737efc1eda23b904fbe0e66b37715fb0e5c3e58b
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20191014153931.20699-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
---
block/mirror.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/block/mirror.c b/block/mirror.c
index 454365ce00..bb17cfce31 100644
--- a/block/mirror.c
+++ b/block/mirror.c
@@ -620,11 +620,11 @@ static int mirror_exit_common(Job *job)
{
MirrorBlockJob *s = container_of(job, MirrorBlockJob, common.job);
BlockJob *bjob = &s->common;
- MirrorBDSOpaque *bs_opaque = s->mirror_top_bs->opaque;
+ MirrorBDSOpaque *bs_opaque;
AioContext *replace_aio_context = NULL;
- BlockDriverState *src = s->mirror_top_bs->backing->bs;
- BlockDriverState *target_bs = blk_bs(s->target);
- BlockDriverState *mirror_top_bs = s->mirror_top_bs;
+ BlockDriverState *src;
+ BlockDriverState *target_bs;
+ BlockDriverState *mirror_top_bs;
Error *local_err = NULL;
bool abort = job->ret < 0;
int ret = 0;
@@ -634,6 +634,11 @@ static int mirror_exit_common(Job *job)
}
s->prepared = true;
+ mirror_top_bs = s->mirror_top_bs;
+ bs_opaque = mirror_top_bs->opaque;
+ src = mirror_top_bs->backing->bs;
+ target_bs = blk_bs(s->target);
+
if (bdrv_chain_contains(src, target_bs)) {
bdrv_unfreeze_backing_chain(mirror_top_bs, target_bs);
}
--
2.21.0
next prev parent reply other threads:[~2019-10-28 13:03 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-28 12:13 [PULL 00/69] Block patches for softfreeze Max Reitz
2019-10-28 12:13 ` [PULL 01/69] iotests: Prefer null-co over null-aio Max Reitz
2019-10-28 12:13 ` [PULL 02/69] iotests: Allow skipping test cases Max Reitz
2019-10-28 12:13 ` [PULL 03/69] iotests: Use case_skip() in skip_if_unsupported() Max Reitz
2019-10-28 12:13 ` [PULL 04/69] iotests: Let skip_if_unsupported accept a function Max Reitz
2019-10-28 12:13 ` [PULL 05/69] iotests: Test driver whitelisting in 093 Max Reitz
2019-10-28 12:13 ` [PULL 06/69] iotests: Test driver whitelisting in 136 Max Reitz
2019-10-28 12:13 ` [PULL 07/69] iotests: Cache supported_formats() Max Reitz
2019-10-28 12:14 ` [PULL 08/69] hbitmap: handle set/reset with zero length Max Reitz
2019-10-28 12:14 ` [PULL 09/69] block/mirror: simplify do_sync_target_write Max Reitz
2019-10-28 12:14 ` [PULL 10/69] block/block-backend: add blk_co_pwritev_part Max Reitz
2019-10-28 12:14 ` [PULL 11/69] block/mirror: support unaligned write in active mirror Max Reitz
2019-10-28 12:14 ` [PULL 12/69] Revert "mirror: Only mirror granularity-aligned chunks" Max Reitz
2019-10-28 12:14 ` [PULL 13/69] iotests: Introduce $SOCK_DIR Max Reitz
2019-10-28 12:14 ` [PULL 14/69] iotests.py: Store socket files in $SOCK_DIR Max Reitz
2019-10-28 12:14 ` [PULL 15/69] iotests.py: Add @base_dir to FilePaths etc Max Reitz
2019-10-28 12:14 ` [PULL 16/69] iotests: Filter $SOCK_DIR Max Reitz
2019-10-28 12:14 ` [PULL 17/69] iotests: Let common.nbd create socket in $SOCK_DIR Max Reitz
2019-10-28 12:14 ` [PULL 18/69] iotests/083: Create " Max Reitz
2019-10-28 12:14 ` [PULL 19/69] iotests/140: " Max Reitz
2019-10-28 12:14 ` [PULL 20/69] iotests/143: " Max Reitz
2019-10-28 12:14 ` [PULL 21/69] iotests/147: " Max Reitz
2019-10-28 12:14 ` [PULL 22/69] iotests/181: " Max Reitz
2019-10-28 12:14 ` [PULL 23/69] iotests/182: " Max Reitz
2019-10-28 12:14 ` [PULL 24/69] iotests/183: " Max Reitz
2019-10-28 12:14 ` [PULL 25/69] iotests/192: " Max Reitz
2019-10-28 12:14 ` [PULL 26/69] iotests/194: Create sockets " Max Reitz
2019-10-28 12:14 ` [PULL 27/69] iotests/201: Create socket " Max Reitz
2019-10-28 12:14 ` [PULL 28/69] iotests/205: " Max Reitz
2019-10-28 12:14 ` [PULL 29/69] iotests/208: " Max Reitz
2019-10-28 12:14 ` [PULL 30/69] iotests/209: " Max Reitz
2019-10-28 12:14 ` [PULL 31/69] iotests/222: " Max Reitz
2019-10-28 12:14 ` [PULL 32/69] iotests/223: " Max Reitz
2019-10-28 12:14 ` [PULL 33/69] iotests/240: " Max Reitz
2019-10-28 12:14 ` [PULL 34/69] iotests/267: " Max Reitz
2019-10-28 12:14 ` [PULL 35/69] iotests: Drop TEST_DIR filter from _filter_nbd Max Reitz
2019-10-28 12:14 ` [PULL 36/69] block/block-copy: allocate buffer in block_copy_with_bounce_buffer Max Reitz
2019-10-28 12:14 ` [PULL 37/69] block/block-copy: limit copy_range_size to 16 MiB Max Reitz
2019-10-28 12:14 ` [PULL 38/69] block/block-copy: refactor copying Max Reitz
2019-10-28 12:14 ` [PULL 39/69] util: introduce SharedResource Max Reitz
2019-10-28 12:14 ` [PULL 40/69] block/block-copy: add memory limit Max Reitz
2019-10-28 12:14 ` [PULL 41/69] block/block-copy: increase buffered copy request Max Reitz
2019-10-28 12:14 ` [PULL 42/69] block/nvme: add support for write zeros Max Reitz
2019-10-28 12:14 ` [PULL 43/69] block/nvme: add support for discard Max Reitz
2019-10-28 12:14 ` Max Reitz [this message]
2019-10-28 12:14 ` [PULL 45/69] include: Move endof() up from hw/virtio/virtio.h Max Reitz
2019-10-28 12:14 ` [PULL 46/69] qcow2: Use endof() Max Reitz
2019-10-28 12:14 ` [PULL 47/69] qcow2: Add Error ** to qcow2_read_snapshots() Max Reitz
2019-10-28 12:14 ` [PULL 48/69] qcow2: Keep unknown extra snapshot data Max Reitz
2019-10-28 12:14 ` [PULL 49/69] qcow2: Make qcow2_write_snapshots() public Max Reitz
2019-10-28 12:14 ` [PULL 50/69] qcow2: Put qcow2_upgrade() into its own function Max Reitz
2019-10-28 12:14 ` [PULL 51/69] qcow2: Write v3-compliant snapshot list on upgrade Max Reitz
2019-10-28 12:14 ` [PULL 52/69] qcow2: Separate qcow2_check_read_snapshot_table() Max Reitz
2019-10-28 12:14 ` [PULL 53/69] qcow2: Add qcow2_check_fix_snapshot_table() Max Reitz
2019-10-28 12:14 ` [PULL 54/69] qcow2: Fix broken snapshot table entries Max Reitz
2019-10-28 12:14 ` [PULL 55/69] qcow2: Keep track of the snapshot table length Max Reitz
2019-10-28 12:14 ` [PULL 56/69] qcow2: Fix overly long snapshot tables Max Reitz
2019-10-28 12:14 ` [PULL 57/69] qcow2: Repair snapshot table with too many entries Max Reitz
2019-10-28 12:14 ` [PULL 58/69] qcow2: Fix v3 snapshot table entry compliancy Max Reitz
2019-10-28 12:14 ` [PULL 59/69] iotests: Add peek_file* functions Max Reitz
2019-10-28 12:14 ` [PULL 60/69] iotests: Test qcow2's snapshot table handling Max Reitz
2019-10-28 12:14 ` [PULL 61/69] block: Handle filter truncation like native impl Max Reitz
2019-10-28 12:14 ` [PULL 62/69] block/cor: Drop cor_co_truncate() Max Reitz
2019-10-28 12:14 ` [PULL 63/69] block: Do not truncate file node when formatting Max Reitz
2019-10-28 12:14 ` [PULL 64/69] block: Add @exact parameter to bdrv_co_truncate() Max Reitz
2019-10-28 12:14 ` [PULL 65/69] block: Evaluate @exact in protocol drivers Max Reitz
2019-10-28 12:14 ` [PULL 66/69] block: Let format drivers pass @exact Max Reitz
2019-10-28 12:14 ` [PULL 67/69] block: Pass truncate exact=true where reasonable Max Reitz
2019-10-28 12:15 ` [PULL 68/69] Revert "qemu-img: Check post-truncation size" Max Reitz
2019-10-28 12:15 ` [PULL 69/69] qemu-iotests: restrict 264 to qcow2 only Max Reitz
2019-10-28 21:13 ` [PULL 00/69] Block patches for softfreeze Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191028121501.15279-45-mreitz@redhat.com \
--to=mreitz@redhat.com \
--cc=kwolf@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).