From: Max Reitz <mreitz@redhat.com>
To: qemu-block@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>,
Peter Maydell <peter.maydell@linaro.org>,
qemu-devel@nongnu.org, Max Reitz <mreitz@redhat.com>
Subject: [PULL 54/69] qcow2: Fix broken snapshot table entries
Date: Mon, 28 Oct 2019 13:14:46 +0100 [thread overview]
Message-ID: <20191028121501.15279-55-mreitz@redhat.com> (raw)
In-Reply-To: <20191028121501.15279-1-mreitz@redhat.com>
The only case where we currently reject snapshot table entries is when
they have too much extra data. Fix them with qemu-img check -r all by
counting it as a corruption, reducing their extra_data_size, and then
letting qcow2_check_fix_snapshot_table() do the rest.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191011152814.14791-11-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
---
block/qcow2-snapshot.c | 67 +++++++++++++++++++++++++++++++++++-------
1 file changed, 56 insertions(+), 11 deletions(-)
diff --git a/block/qcow2-snapshot.c b/block/qcow2-snapshot.c
index b526a8f819..53dc1635ec 100644
--- a/block/qcow2-snapshot.c
+++ b/block/qcow2-snapshot.c
@@ -44,7 +44,23 @@ void qcow2_free_snapshots(BlockDriverState *bs)
s->nb_snapshots = 0;
}
-int qcow2_read_snapshots(BlockDriverState *bs, Error **errp)
+/*
+ * If @repair is true, try to repair a broken snapshot table instead
+ * of just returning an error:
+ *
+ * - If there were snapshots with too much extra metadata, increment
+ * *extra_data_dropped for each.
+ * This requires the caller to eventually rewrite the whole snapshot
+ * table, which requires cluster allocation. Therefore, this should
+ * be done only after qcow2_check_refcounts() made sure the refcount
+ * structures are valid.
+ * (In the meantime, the image is still valid because
+ * qcow2_check_refcounts() does not do anything with snapshots'
+ * extra data.)
+ */
+static int qcow2_do_read_snapshots(BlockDriverState *bs, bool repair,
+ int *extra_data_dropped,
+ Error **errp)
{
BDRVQcow2State *s = bs->opaque;
QCowSnapshotHeader h;
@@ -64,6 +80,8 @@ int qcow2_read_snapshots(BlockDriverState *bs, Error **errp)
s->snapshots = g_new0(QCowSnapshot, s->nb_snapshots);
for(i = 0; i < s->nb_snapshots; i++) {
+ bool truncate_unknown_extra_data = false;
+
/* Read statically sized part of the snapshot header */
offset = ROUND_UP(offset, 8);
ret = bdrv_pread(bs->file, offset, &h, sizeof(h));
@@ -86,10 +104,21 @@ int qcow2_read_snapshots(BlockDriverState *bs, Error **errp)
name_size = be16_to_cpu(h.name_size);
if (sn->extra_data_size > QCOW_MAX_SNAPSHOT_EXTRA_DATA) {
- ret = -EFBIG;
- error_setg(errp, "Too much extra metadata in snapshot table "
- "entry %i", i);
- goto fail;
+ if (!repair) {
+ ret = -EFBIG;
+ error_setg(errp, "Too much extra metadata in snapshot table "
+ "entry %i", i);
+ error_append_hint(errp, "You can force-remove this extra "
+ "metadata with qemu-img check -r all\n");
+ goto fail;
+ }
+
+ fprintf(stderr, "Discarding too much extra metadata in snapshot "
+ "table entry %i (%" PRIu32 " > %u)\n",
+ i, sn->extra_data_size, QCOW_MAX_SNAPSHOT_EXTRA_DATA);
+
+ (*extra_data_dropped)++;
+ truncate_unknown_extra_data = true;
}
/* Read known extra data */
@@ -113,18 +142,26 @@ int qcow2_read_snapshots(BlockDriverState *bs, Error **errp)
}
if (sn->extra_data_size > sizeof(extra)) {
- /* Store unknown extra data */
- size_t unknown_extra_data_size =
- sn->extra_data_size - sizeof(extra);
+ uint64_t extra_data_end;
+ size_t unknown_extra_data_size;
+
+ extra_data_end = offset + sn->extra_data_size - sizeof(extra);
+ if (truncate_unknown_extra_data) {
+ sn->extra_data_size = QCOW_MAX_SNAPSHOT_EXTRA_DATA;
+ }
+
+ /* Store unknown extra data */
+ unknown_extra_data_size = sn->extra_data_size - sizeof(extra);
sn->unknown_extra_data = g_malloc(unknown_extra_data_size);
ret = bdrv_pread(bs->file, offset, sn->unknown_extra_data,
unknown_extra_data_size);
if (ret < 0) {
- error_setg_errno(errp, -ret, "Failed to read snapshot table");
+ error_setg_errno(errp, -ret,
+ "Failed to read snapshot table");
goto fail;
}
- offset += unknown_extra_data_size;
+ offset = extra_data_end;
}
/* Read snapshot ID */
@@ -163,6 +200,11 @@ fail:
return ret;
}
+int qcow2_read_snapshots(BlockDriverState *bs, Error **errp)
+{
+ return qcow2_do_read_snapshots(bs, false, NULL, errp);
+}
+
/* add at the end of the file a new list of snapshots */
int qcow2_write_snapshots(BlockDriverState *bs)
{
@@ -328,6 +370,7 @@ int coroutine_fn qcow2_check_read_snapshot_table(BlockDriverState *bs,
{
BDRVQcow2State *s = bs->opaque;
Error *local_err = NULL;
+ int extra_data_dropped = 0;
int ret;
struct {
uint32_t nb_snapshots;
@@ -363,7 +406,8 @@ int coroutine_fn qcow2_check_read_snapshot_table(BlockDriverState *bs,
}
qemu_co_mutex_unlock(&s->lock);
- ret = qcow2_read_snapshots(bs, &local_err);
+ ret = qcow2_do_read_snapshots(bs, fix & BDRV_FIX_ERRORS,
+ &extra_data_dropped, &local_err);
qemu_co_mutex_lock(&s->lock);
if (ret < 0) {
result->check_errors++;
@@ -376,6 +420,7 @@ int coroutine_fn qcow2_check_read_snapshot_table(BlockDriverState *bs,
return ret;
}
+ result->corruptions += extra_data_dropped;
return 0;
}
--
2.21.0
next prev parent reply other threads:[~2019-10-28 12:58 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-28 12:13 [PULL 00/69] Block patches for softfreeze Max Reitz
2019-10-28 12:13 ` [PULL 01/69] iotests: Prefer null-co over null-aio Max Reitz
2019-10-28 12:13 ` [PULL 02/69] iotests: Allow skipping test cases Max Reitz
2019-10-28 12:13 ` [PULL 03/69] iotests: Use case_skip() in skip_if_unsupported() Max Reitz
2019-10-28 12:13 ` [PULL 04/69] iotests: Let skip_if_unsupported accept a function Max Reitz
2019-10-28 12:13 ` [PULL 05/69] iotests: Test driver whitelisting in 093 Max Reitz
2019-10-28 12:13 ` [PULL 06/69] iotests: Test driver whitelisting in 136 Max Reitz
2019-10-28 12:13 ` [PULL 07/69] iotests: Cache supported_formats() Max Reitz
2019-10-28 12:14 ` [PULL 08/69] hbitmap: handle set/reset with zero length Max Reitz
2019-10-28 12:14 ` [PULL 09/69] block/mirror: simplify do_sync_target_write Max Reitz
2019-10-28 12:14 ` [PULL 10/69] block/block-backend: add blk_co_pwritev_part Max Reitz
2019-10-28 12:14 ` [PULL 11/69] block/mirror: support unaligned write in active mirror Max Reitz
2019-10-28 12:14 ` [PULL 12/69] Revert "mirror: Only mirror granularity-aligned chunks" Max Reitz
2019-10-28 12:14 ` [PULL 13/69] iotests: Introduce $SOCK_DIR Max Reitz
2019-10-28 12:14 ` [PULL 14/69] iotests.py: Store socket files in $SOCK_DIR Max Reitz
2019-10-28 12:14 ` [PULL 15/69] iotests.py: Add @base_dir to FilePaths etc Max Reitz
2019-10-28 12:14 ` [PULL 16/69] iotests: Filter $SOCK_DIR Max Reitz
2019-10-28 12:14 ` [PULL 17/69] iotests: Let common.nbd create socket in $SOCK_DIR Max Reitz
2019-10-28 12:14 ` [PULL 18/69] iotests/083: Create " Max Reitz
2019-10-28 12:14 ` [PULL 19/69] iotests/140: " Max Reitz
2019-10-28 12:14 ` [PULL 20/69] iotests/143: " Max Reitz
2019-10-28 12:14 ` [PULL 21/69] iotests/147: " Max Reitz
2019-10-28 12:14 ` [PULL 22/69] iotests/181: " Max Reitz
2019-10-28 12:14 ` [PULL 23/69] iotests/182: " Max Reitz
2019-10-28 12:14 ` [PULL 24/69] iotests/183: " Max Reitz
2019-10-28 12:14 ` [PULL 25/69] iotests/192: " Max Reitz
2019-10-28 12:14 ` [PULL 26/69] iotests/194: Create sockets " Max Reitz
2019-10-28 12:14 ` [PULL 27/69] iotests/201: Create socket " Max Reitz
2019-10-28 12:14 ` [PULL 28/69] iotests/205: " Max Reitz
2019-10-28 12:14 ` [PULL 29/69] iotests/208: " Max Reitz
2019-10-28 12:14 ` [PULL 30/69] iotests/209: " Max Reitz
2019-10-28 12:14 ` [PULL 31/69] iotests/222: " Max Reitz
2019-10-28 12:14 ` [PULL 32/69] iotests/223: " Max Reitz
2019-10-28 12:14 ` [PULL 33/69] iotests/240: " Max Reitz
2019-10-28 12:14 ` [PULL 34/69] iotests/267: " Max Reitz
2019-10-28 12:14 ` [PULL 35/69] iotests: Drop TEST_DIR filter from _filter_nbd Max Reitz
2019-10-28 12:14 ` [PULL 36/69] block/block-copy: allocate buffer in block_copy_with_bounce_buffer Max Reitz
2019-10-28 12:14 ` [PULL 37/69] block/block-copy: limit copy_range_size to 16 MiB Max Reitz
2019-10-28 12:14 ` [PULL 38/69] block/block-copy: refactor copying Max Reitz
2019-10-28 12:14 ` [PULL 39/69] util: introduce SharedResource Max Reitz
2019-10-28 12:14 ` [PULL 40/69] block/block-copy: add memory limit Max Reitz
2019-10-28 12:14 ` [PULL 41/69] block/block-copy: increase buffered copy request Max Reitz
2019-10-28 12:14 ` [PULL 42/69] block/nvme: add support for write zeros Max Reitz
2019-10-28 12:14 ` [PULL 43/69] block/nvme: add support for discard Max Reitz
2019-10-28 12:14 ` [PULL 44/69] mirror: Do not dereference invalid pointers Max Reitz
2019-10-28 12:14 ` [PULL 45/69] include: Move endof() up from hw/virtio/virtio.h Max Reitz
2019-10-28 12:14 ` [PULL 46/69] qcow2: Use endof() Max Reitz
2019-10-28 12:14 ` [PULL 47/69] qcow2: Add Error ** to qcow2_read_snapshots() Max Reitz
2019-10-28 12:14 ` [PULL 48/69] qcow2: Keep unknown extra snapshot data Max Reitz
2019-10-28 12:14 ` [PULL 49/69] qcow2: Make qcow2_write_snapshots() public Max Reitz
2019-10-28 12:14 ` [PULL 50/69] qcow2: Put qcow2_upgrade() into its own function Max Reitz
2019-10-28 12:14 ` [PULL 51/69] qcow2: Write v3-compliant snapshot list on upgrade Max Reitz
2019-10-28 12:14 ` [PULL 52/69] qcow2: Separate qcow2_check_read_snapshot_table() Max Reitz
2019-10-28 12:14 ` [PULL 53/69] qcow2: Add qcow2_check_fix_snapshot_table() Max Reitz
2019-10-28 12:14 ` Max Reitz [this message]
2019-10-28 12:14 ` [PULL 55/69] qcow2: Keep track of the snapshot table length Max Reitz
2019-10-28 12:14 ` [PULL 56/69] qcow2: Fix overly long snapshot tables Max Reitz
2019-10-28 12:14 ` [PULL 57/69] qcow2: Repair snapshot table with too many entries Max Reitz
2019-10-28 12:14 ` [PULL 58/69] qcow2: Fix v3 snapshot table entry compliancy Max Reitz
2019-10-28 12:14 ` [PULL 59/69] iotests: Add peek_file* functions Max Reitz
2019-10-28 12:14 ` [PULL 60/69] iotests: Test qcow2's snapshot table handling Max Reitz
2019-10-28 12:14 ` [PULL 61/69] block: Handle filter truncation like native impl Max Reitz
2019-10-28 12:14 ` [PULL 62/69] block/cor: Drop cor_co_truncate() Max Reitz
2019-10-28 12:14 ` [PULL 63/69] block: Do not truncate file node when formatting Max Reitz
2019-10-28 12:14 ` [PULL 64/69] block: Add @exact parameter to bdrv_co_truncate() Max Reitz
2019-10-28 12:14 ` [PULL 65/69] block: Evaluate @exact in protocol drivers Max Reitz
2019-10-28 12:14 ` [PULL 66/69] block: Let format drivers pass @exact Max Reitz
2019-10-28 12:14 ` [PULL 67/69] block: Pass truncate exact=true where reasonable Max Reitz
2019-10-28 12:15 ` [PULL 68/69] Revert "qemu-img: Check post-truncation size" Max Reitz
2019-10-28 12:15 ` [PULL 69/69] qemu-iotests: restrict 264 to qcow2 only Max Reitz
2019-10-28 21:13 ` [PULL 00/69] Block patches for softfreeze Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191028121501.15279-55-mreitz@redhat.com \
--to=mreitz@redhat.com \
--cc=kwolf@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).