From: "Alex Bennée" <alex.bennee@linaro.org>
To: qemu-devel@nongnu.org
Cc: damien.hedde@greensocs.com, luis.machado@linaro.org,
"Philippe Mathieu-Daudé" <philmd@redhat.com>,
richard.henderson@linaro.org, alan.hayward@arm.com,
"Alex Bennée" <alex.bennee@linaro.org>
Subject: [RFC PATCH 04/11] gdbstub: move mem_buf to GDBState and use GByteArray
Date: Fri, 15 Nov 2019 17:29:53 +0000 [thread overview]
Message-ID: <20191115173000.21891-5-alex.bennee@linaro.org> (raw)
In-Reply-To: <20191115173000.21891-1-alex.bennee@linaro.org>
This is in preparation for further re-factoring of the register API
with the rest of the code. Theoretically the read register function
could overwrite the MAX_PACKET_LENGTH buffer although currently all
registers are well within the size range.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
---
gdbstub.c | 52 +++++++++++++++++++++++++++++++---------------------
1 file changed, 31 insertions(+), 21 deletions(-)
diff --git a/gdbstub.c b/gdbstub.c
index 528404c1953..4c3e211890f 100644
--- a/gdbstub.c
+++ b/gdbstub.c
@@ -366,6 +366,7 @@ typedef struct GDBState {
char syscall_buf[256];
gdb_syscall_complete_cb current_syscall_cb;
GString *str_buf;
+ GByteArray *mem_buf;
} GDBState;
/* By default use no IRQs and no timers while single stepping so as to
@@ -380,6 +381,7 @@ static GDBState *gdb_allocate_state(void)
g_assert(!gdbserver_state);
gdbserver_state = g_new0(GDBState, 1);
gdbserver_state->str_buf = g_string_new(NULL);
+ gdbserver_state->mem_buf = g_byte_array_sized_new(MAX_PACKET_LENGTH);
return gdbserver_state;
}
@@ -566,12 +568,13 @@ static void memtohex(GString *buf, const uint8_t *mem, int len)
g_string_append_c(buf, '\0');
}
-static void hextomem(uint8_t *mem, const char *buf, int len)
+static void hextomem(GByteArray *mem, const char *buf, int len)
{
int i;
for(i = 0; i < len; i++) {
- mem[i] = (fromhex(buf[0]) << 4) | fromhex(buf[1]);
+ guint8 byte = fromhex(buf[0]) << 4 | fromhex(buf[1]);
+ g_byte_array_append(mem, &byte, 1);
buf += 2;
}
}
@@ -1396,7 +1399,6 @@ static int cmd_parse_params(const char *data, const char *schema,
typedef struct GdbCmdContext {
GdbCmdVariant *params;
int num_params;
- uint8_t mem_buf[MAX_PACKET_LENGTH];
} GdbCmdContext;
typedef void (*GdbCmdHandler)(GdbCmdContext *gdb_ctx, void *user_ctx);
@@ -1489,6 +1491,7 @@ static void run_cmd_parser(GDBState *s, const char *data,
}
g_string_set_size(s->str_buf, 0);
+ g_byte_array_set_size(s->mem_buf, 0);
/* In case there was an error during the command parsing we must
* send a NULL packet to indicate the command is not supported */
@@ -1710,8 +1713,8 @@ static void handle_set_reg(GdbCmdContext *gdb_ctx, void *user_ctx)
}
reg_size = strlen(gdb_ctx->params[1].data) / 2;
- hextomem(gdb_ctx->mem_buf, gdb_ctx->params[1].data, reg_size);
- gdb_write_register(s->g_cpu, gdb_ctx->mem_buf,
+ hextomem(s->mem_buf, gdb_ctx->params[1].data, reg_size);
+ gdb_write_register(s->g_cpu, s->mem_buf->data,
gdb_ctx->params[0].val_ull);
put_packet(s, "OK");
}
@@ -1731,14 +1734,16 @@ static void handle_get_reg(GdbCmdContext *gdb_ctx, void *user_ctx)
return;
}
- reg_size = gdb_read_register(s->g_cpu, gdb_ctx->mem_buf,
+ reg_size = gdb_read_register(s->g_cpu, s->mem_buf->data,
gdb_ctx->params[0].val_ull);
if (!reg_size) {
put_packet(s, "E14");
return;
+ } else {
+ g_byte_array_set_size(s->mem_buf, reg_size);
}
- memtohex(s->str_buf, gdb_ctx->mem_buf, reg_size);
+ memtohex(s->str_buf, s->mem_buf->data, reg_size);
put_packet(s, s->str_buf->str);
}
@@ -1757,11 +1762,11 @@ static void handle_write_mem(GdbCmdContext *gdb_ctx, void *user_ctx)
return;
}
- hextomem(gdb_ctx->mem_buf, gdb_ctx->params[2].data,
+ hextomem(s->mem_buf, gdb_ctx->params[2].data,
gdb_ctx->params[1].val_ull);
if (target_memory_rw_debug(s->g_cpu, gdb_ctx->params[0].val_ull,
- gdb_ctx->mem_buf,
- gdb_ctx->params[1].val_ull, true)) {
+ s->mem_buf->data,
+ s->mem_buf->len, true)) {
put_packet(s, "E14");
return;
}
@@ -1784,14 +1789,16 @@ static void handle_read_mem(GdbCmdContext *gdb_ctx, void *user_ctx)
return;
}
+ g_byte_array_set_size(s->mem_buf, gdb_ctx->params[1].val_ull);
+
if (target_memory_rw_debug(s->g_cpu, gdb_ctx->params[0].val_ull,
- gdb_ctx->mem_buf,
- gdb_ctx->params[1].val_ull, false)) {
+ s->mem_buf->data,
+ s->mem_buf->len, false)) {
put_packet(s, "E14");
return;
}
- memtohex(s->str_buf, gdb_ctx->mem_buf, gdb_ctx->params[1].val_ull);
+ memtohex(s->str_buf, s->mem_buf->data, s->mem_buf->len);
put_packet(s, s->str_buf->str);
}
@@ -1807,9 +1814,9 @@ static void handle_write_all_regs(GdbCmdContext *gdb_ctx, void *user_ctx)
}
cpu_synchronize_state(s->g_cpu);
- registers = gdb_ctx->mem_buf;
len = strlen(gdb_ctx->params[0].data) / 2;
- hextomem(registers, gdb_ctx->params[0].data, len);
+ hextomem(s->mem_buf, gdb_ctx->params[0].data, len);
+ registers = s->mem_buf->data;
for (addr = 0; addr < s->g_cpu->gdb_num_g_regs && len > 0;
addr++) {
reg_size = gdb_write_register(s->g_cpu, registers, addr);
@@ -1827,11 +1834,13 @@ static void handle_read_all_regs(GdbCmdContext *gdb_ctx, void *user_ctx)
cpu_synchronize_state(s->g_cpu);
len = 0;
for (addr = 0; addr < s->g_cpu->gdb_num_g_regs; addr++) {
- len += gdb_read_register(s->g_cpu, gdb_ctx->mem_buf + len,
+ len += gdb_read_register(s->g_cpu, s->mem_buf->data + len,
addr);
}
+ /* FIXME: This is after the fact sizing */
+ g_byte_array_set_size(s->mem_buf, len);
- memtohex(s->str_buf, gdb_ctx->mem_buf, len);
+ memtohex(s->str_buf, s->mem_buf->data, len);
put_packet(s, s->str_buf->str);
}
@@ -2102,6 +2111,7 @@ static void handle_query_offsets(GdbCmdContext *gdb_ctx, void *user_ctx)
static void handle_query_rcmd(GdbCmdContext *gdb_ctx, void *user_ctx)
{
GDBState *s = gdbserver_state;
+ const guint8 zero = 0;
int len;
if (!gdb_ctx->num_params) {
@@ -2116,11 +2126,11 @@ static void handle_query_rcmd(GdbCmdContext *gdb_ctx, void *user_ctx)
}
len = len / 2;
- hextomem(gdb_ctx->mem_buf, gdb_ctx->params[0].data, len);
- gdb_ctx->mem_buf[len++] = 0;
- qemu_chr_be_write(s->mon_chr, gdb_ctx->mem_buf, len);
+ g_byte_array_set_size(s->mem_buf, len);
+ hextomem(s->mem_buf, gdb_ctx->params[0].data, len);
+ g_byte_array_append(s->mem_buf, &zero, 1);
+ qemu_chr_be_write(s->mon_chr, s->mem_buf->data, s->mem_buf->len);
put_packet(s, "OK");
-
}
#endif
--
2.20.1
next prev parent reply other threads:[~2019-11-15 17:38 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-15 17:29 [RFC PATCH 00/11] gdbstub re-factor and SVE support Alex Bennée
2019-11-15 17:29 ` [RFC PATCH 01/11] gdbstub: move allocation of GDBState to one place Alex Bennée
2019-11-18 7:37 ` Richard Henderson
2019-11-18 7:41 ` Richard Henderson
2019-11-18 9:19 ` Damien Hedde
2019-11-18 11:24 ` Richard Henderson
2019-11-18 9:50 ` Damien Hedde
2019-11-15 17:29 ` [RFC PATCH 02/11] gdbstub: stop passing GDBState * around Alex Bennée
2019-11-18 7:47 ` Richard Henderson
2019-11-18 11:52 ` Alex Bennée
2019-11-18 11:57 ` Richard Henderson
2019-11-18 9:40 ` Damien Hedde
2019-11-18 11:59 ` Alex Bennée
2019-11-15 17:29 ` [RFC PATCH 03/11] gdbstub: move str_buf to GDBState and use GString Alex Bennée
2019-11-18 8:06 ` Richard Henderson
2019-11-15 17:29 ` Alex Bennée [this message]
2019-11-18 8:10 ` [RFC PATCH 04/11] gdbstub: move mem_buf to GDBState and use GByteArray Richard Henderson
2019-11-15 17:29 ` [RFC PATCH 05/11] gdbstub: add helper for 128 bit registers Alex Bennée
2019-11-18 8:13 ` Richard Henderson
2019-11-15 17:29 ` [RFC PATCH 06/11] target/arm: use gdb_get_reg helpers Alex Bennée
2019-11-18 8:19 ` Richard Henderson
2019-11-15 17:29 ` [RFC PATCH 07/11] target/m68k: " Alex Bennée
2019-11-18 8:21 ` Richard Henderson
2019-11-15 17:29 ` [RFC PATCH 08/11] gdbstub: extend GByteArray to read register helpers Alex Bennée
2019-11-18 8:41 ` Richard Henderson
2019-11-15 17:29 ` [RFC PATCH 09/11] target/arm: prepare for multiple dynamic XMLs Alex Bennée
2019-11-15 17:29 ` [RFC PATCH 10/11] target/arm: explicitly encode regnum in our XML Alex Bennée
2019-11-18 8:43 ` Richard Henderson
2019-11-15 17:30 ` [RFC PATCH 11/11] target/arm: generate xml description of our SVE registers Alex Bennée
2019-11-18 8:46 ` Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191115173000.21891-5-alex.bennee@linaro.org \
--to=alex.bennee@linaro.org \
--cc=alan.hayward@arm.com \
--cc=damien.hedde@greensocs.com \
--cc=luis.machado@linaro.org \
--cc=philmd@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).