qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Janosch Frank <frankja@linux.ibm.com>
To: qemu-devel@nongnu.org
Cc: thuth@redhat.com, pmorel@linux.ibm.com, david@redhat.com,
	cohuck@redhat.com, borntraeger@de.ibm.com, qemu-s390x@nongnu.org,
	mihajlov@linux.ibm.com
Subject: [PATCH 03/15] s390x: protvirt: Add diag308 subcodes 8 - 10
Date: Wed, 20 Nov 2019 06:43:22 -0500	[thread overview]
Message-ID: <20191120114334.2287-4-frankja@linux.ibm.com> (raw)
In-Reply-To: <20191120114334.2287-1-frankja@linux.ibm.com>

For diag308 subcodes 8 - 10 we have a new ipib of type 5. The ipib
holds the address and length of the secure execution header, as well
as a list of guest components.

Each component is a block of memory, for example kernel or initrd,
which needs to be decrypted by the Ultravisor in order to run a
protected VM. The secure execution header instructs the Ultravisor on
how to handle the protected VM and its components.

Subcodes 8 and 9 are similiar to 5 and 6 and subcode 10 will finally
start the protected guest.

Subcodes 8-10 are not valid in protected mode, we have to do a subcode
3 and then the 8 and 10 combination for a protected reboot.

Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
---
 hw/s390x/ipl.c      | 48 ++++++++++++++++++++++++++++++++++++++++++---
 hw/s390x/ipl.h      | 33 +++++++++++++++++++++++++++++++
 target/s390x/diag.c | 26 ++++++++++++++++++++++--
 3 files changed, 102 insertions(+), 5 deletions(-)

diff --git a/hw/s390x/ipl.c b/hw/s390x/ipl.c
index ca544d64c5..a077926f36 100644
--- a/hw/s390x/ipl.c
+++ b/hw/s390x/ipl.c
@@ -529,15 +529,56 @@ static bool is_virtio_scsi_device(IplParameterBlock *iplb)
     return is_virtio_ccw_device_of_type(iplb, VIRTIO_ID_SCSI);
 }
 
+int s390_ipl_pv_check_comp(IplParameterBlock *iplb)
+{
+    int i;
+    IPLBlockPV *ipib_pv = &iplb->pv;
+
+    if (ipib_pv->num_comp == 0) {
+        return -EINVAL;
+    }
+
+    for (i = 0; i < ipib_pv->num_comp; i++) {
+
+        /* Addr must be 4k aligned */
+        if (ipib_pv->components[i].addr & ~TARGET_PAGE_MASK) {
+            return -EINVAL;
+        }
+
+        /* Tweak prefix is monotonously increasing with each component */
+        if (i < ipib_pv->num_comp - 1 &&
+            ipib_pv->components[i].tweak_pref >
+            ipib_pv->components[i + 1].tweak_pref) {
+            return -EINVAL;
+        }
+    }
+    return 1;
+}
+
 void s390_ipl_update_diag308(IplParameterBlock *iplb)
 {
     S390IPLState *ipl = get_ipl_device();
 
-    ipl->iplb = *iplb;
-    ipl->iplb_valid = true;
+    if (iplb->pbt == 5) {
+        ipl->iplb_pbt5 = *iplb;
+        ipl->iplb_valid_pbt5 = true;
+    } else {
+        ipl->iplb = *iplb;
+        ipl->iplb_valid = true;
+    }
     ipl->netboot = is_virtio_net_device(iplb);
 }
 
+IplParameterBlock *s390_ipl_get_iplb_secure(void)
+{
+    S390IPLState *ipl = get_ipl_device();
+
+    if (!ipl->iplb_valid_pbt5) {
+        return NULL;
+    }
+    return &ipl->iplb_pbt5;
+}
+
 IplParameterBlock *s390_ipl_get_iplb(void)
 {
     S390IPLState *ipl = get_ipl_device();
@@ -552,7 +593,8 @@ void s390_ipl_reset_request(CPUState *cs, enum s390_reset reset_type)
 {
     S390IPLState *ipl = get_ipl_device();
 
-    if (reset_type == S390_RESET_EXTERNAL || reset_type == S390_RESET_REIPL) {
+    if (reset_type == S390_RESET_EXTERNAL || reset_type == S390_RESET_REIPL ||
+        reset_type == S390_RESET_PV) {
         /* use CPU 0 for full resets */
         ipl->reset_cpu_index = 0;
     } else {
diff --git a/hw/s390x/ipl.h b/hw/s390x/ipl.h
index d4813105db..7b8a493509 100644
--- a/hw/s390x/ipl.h
+++ b/hw/s390x/ipl.h
@@ -15,6 +15,24 @@
 #include "cpu.h"
 #include "hw/qdev-core.h"
 
+struct IPLBlockPVComp {
+    uint64_t tweak_pref;
+    uint64_t addr;
+    uint64_t size;
+} QEMU_PACKED;
+typedef struct IPLBlockPVComp IPLBlockPVComp;
+
+struct IPLBlockPV {
+    uint8_t  reserved[84];
+    uint8_t  reserved67[3];
+    uint8_t  version;
+    uint32_t num_comp;
+    uint64_t pv_header_addr;
+    uint64_t pv_header_len;
+    struct IPLBlockPVComp components[];
+} QEMU_PACKED;
+typedef struct IPLBlockPV IPLBlockPV;
+
 struct IplBlockCcw {
     uint8_t  reserved0[85];
     uint8_t  ssid;
@@ -71,6 +89,7 @@ union IplParameterBlock {
         union {
             IplBlockCcw ccw;
             IplBlockFcp fcp;
+            IPLBlockPV pv;
             IplBlockQemuScsi scsi;
         };
     } QEMU_PACKED;
@@ -84,9 +103,11 @@ union IplParameterBlock {
 typedef union IplParameterBlock IplParameterBlock;
 
 int s390_ipl_set_loadparm(uint8_t *loadparm);
+int s390_ipl_pv_check_comp(IplParameterBlock *iplb);
 void s390_ipl_update_diag308(IplParameterBlock *iplb);
 void s390_ipl_prepare_cpu(S390CPU *cpu);
 IplParameterBlock *s390_ipl_get_iplb(void);
+IplParameterBlock *s390_ipl_get_iplb_secure(void);
 
 enum s390_reset {
     /* default is a reset not triggered by a CPU e.g. issued by QMP */
@@ -94,6 +115,7 @@ enum s390_reset {
     S390_RESET_REIPL,
     S390_RESET_MODIFIED_CLEAR,
     S390_RESET_LOAD_NORMAL,
+    S390_RESET_PV,
 };
 void s390_ipl_reset_request(CPUState *cs, enum s390_reset reset_type);
 void s390_ipl_get_reset_request(CPUState **cs, enum s390_reset *reset_type);
@@ -133,6 +155,7 @@ struct S390IPLState {
     /*< private >*/
     DeviceState parent_obj;
     IplParameterBlock iplb;
+    IplParameterBlock iplb_pbt5;
     QemuIplParameters qipl;
     uint64_t start_addr;
     uint64_t compat_start_addr;
@@ -140,6 +163,7 @@ struct S390IPLState {
     uint64_t compat_bios_start_addr;
     bool enforce_bios;
     bool iplb_valid;
+    bool iplb_valid_pbt5;
     bool netboot;
     /* reset related properties don't have to be migrated or reset */
     enum s390_reset reset_type;
@@ -161,9 +185,11 @@ QEMU_BUILD_BUG_MSG(offsetof(S390IPLState, iplb) & 3, "alignment of iplb wrong");
 
 #define S390_IPL_TYPE_FCP 0x00
 #define S390_IPL_TYPE_CCW 0x02
+#define S390_IPL_TYPE_PV 0x05
 #define S390_IPL_TYPE_QEMU_SCSI 0xff
 
 #define S390_IPLB_HEADER_LEN 8
+#define S390_IPLB_MIN_PV_LEN 148
 #define S390_IPLB_MIN_CCW_LEN 200
 #define S390_IPLB_MIN_FCP_LEN 384
 #define S390_IPLB_MIN_QEMU_SCSI_LEN 200
@@ -185,4 +211,11 @@ static inline bool iplb_valid_fcp(IplParameterBlock *iplb)
            iplb->pbt == S390_IPL_TYPE_FCP;
 }
 
+static inline bool iplb_valid_se(IplParameterBlock *iplb)
+{
+    return be32_to_cpu(iplb->len) >= S390_IPLB_MIN_PV_LEN &&
+           iplb->pbt == S390_IPL_TYPE_PV;
+}
+
+
 #endif
diff --git a/target/s390x/diag.c b/target/s390x/diag.c
index 067c667ba7..32049bb4ee 100644
--- a/target/s390x/diag.c
+++ b/target/s390x/diag.c
@@ -52,6 +52,8 @@ int handle_diag_288(CPUS390XState *env, uint64_t r1, uint64_t r3)
 #define DIAG_308_RC_OK              0x0001
 #define DIAG_308_RC_NO_CONF         0x0102
 #define DIAG_308_RC_INVALID         0x0402
+#define DIAG_308_RC_NO_PV_CONF      0x0a02
+#define DIAG_308_RC_INV_FOR_PV      0x0b02
 
 #define DIAG308_RES_MOD_CLR		0
 #define DIAG308_RES_LOAD_NORM		1
@@ -59,6 +61,9 @@ int handle_diag_288(CPUS390XState *env, uint64_t r1, uint64_t r3)
 #define DIAG308_LOAD_NORMAL_DUMP	4
 #define DIAG308_SET			5
 #define DIAG308_STORE			6
+#define DIAG308_PV_SET			8
+#define DIAG308_PV_STORE		9
+#define DIAG308_PV_START		10
 
 static int diag308_parm_check(CPUS390XState *env, uint64_t r1, uint64_t addr,
                               uintptr_t ra, bool write)
@@ -105,6 +110,7 @@ void handle_diag_308(CPUS390XState *env, uint64_t r1, uint64_t r3, uintptr_t ra)
         s390_ipl_reset_request(cs, S390_RESET_REIPL);
         break;
     case DIAG308_SET:
+    case DIAG308_PV_SET: /* Set SE parms */
         if (diag308_parm_check(env, r1, addr, ra, false)) {
             return;
         }
@@ -117,7 +123,8 @@ void handle_diag_308(CPUS390XState *env, uint64_t r1, uint64_t r3, uintptr_t ra)
 
         cpu_physical_memory_read(addr, iplb, be32_to_cpu(iplb->len));
 
-        if (!iplb_valid_ccw(iplb) && !iplb_valid_fcp(iplb)) {
+        if (!iplb_valid_ccw(iplb) && !iplb_valid_fcp(iplb) &&
+            !(iplb_valid_se(iplb) && s390_ipl_pv_check_comp(iplb) >= 0)) {
             env->regs[r1 + 1] = DIAG_308_RC_INVALID;
             goto out;
         }
@@ -128,10 +135,15 @@ out:
         g_free(iplb);
         return;
     case DIAG308_STORE:
+    case DIAG308_PV_STORE: /* Get SE parms */
         if (diag308_parm_check(env, r1, addr, ra, true)) {
             return;
         }
-        iplb = s390_ipl_get_iplb();
+        if (subcode == DIAG308_PV_STORE) {
+            iplb = s390_ipl_get_iplb_secure();
+        } else {
+            iplb = s390_ipl_get_iplb();
+        }
         if (iplb) {
             cpu_physical_memory_write(addr, iplb, be32_to_cpu(iplb->len));
             env->regs[r1 + 1] = DIAG_308_RC_OK;
@@ -139,6 +151,16 @@ out:
             env->regs[r1 + 1] = DIAG_308_RC_NO_CONF;
         }
         return;
+        break;
+    case DIAG308_PV_START: /* SE start */
+        iplb = s390_ipl_get_iplb_secure();
+        if (!iplb_valid_se(iplb)) {
+            env->regs[r1 + 1] = DIAG_308_RC_NO_PV_CONF;
+            return;
+        }
+
+        s390_ipl_reset_request(cs, S390_RESET_PV);
+        break;
     default:
         s390_program_interrupt(env, PGM_SPECIFICATION, ra);
         break;
-- 
2.20.1



  parent reply	other threads:[~2019-11-20 11:58 UTC|newest]

Thread overview: 90+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-20 11:43 [PATCH 00/15] s390x: Protected Virtualization support Janosch Frank
2019-11-20 11:43 ` [PATCH 01/15] s390x: Cleanup cpu resets Janosch Frank
2019-11-21 11:10   ` Cornelia Huck
2019-11-21 11:32     ` Janosch Frank
2019-11-21 12:18       ` Cornelia Huck
2019-11-21 12:53   ` Thomas Huth
2019-11-21 13:11     ` Janosch Frank
2019-11-21 13:17       ` Thomas Huth
2019-11-20 11:43 ` [PATCH 02/15] s390x: Beautify diag308 handling Janosch Frank
2019-11-21 11:17   ` Cornelia Huck
2019-11-21 11:27     ` Janosch Frank
2019-11-21 11:21   ` David Hildenbrand
2019-11-21 11:28     ` Janosch Frank
2019-11-21 13:12     ` Thomas Huth
2019-11-21 13:20   ` Thomas Huth
2019-11-21 13:53     ` Janosch Frank
2019-11-20 11:43 ` Janosch Frank [this message]
2019-11-21 12:47   ` [PATCH 03/15] s390x: protvirt: Add diag308 subcodes 8 - 10 Cornelia Huck
2019-11-21 14:36   ` Thomas Huth
2020-02-07  7:56     ` Janosch Frank
2019-11-20 11:43 ` [PATCH 04/15] Header sync protvirt Janosch Frank
2019-11-21 12:59   ` Cornelia Huck
2019-11-21 13:12     ` Janosch Frank
2019-11-21 13:17       ` Cornelia Huck
2019-11-20 11:43 ` [PATCH 05/15] s390x: protvirt: Sync PV state Janosch Frank
2019-11-21 13:25   ` Cornelia Huck
2019-11-21 13:43     ` Janosch Frank
2019-11-21 14:43   ` Thomas Huth
2019-11-20 11:43 ` [PATCH 06/15] s390x: protvirt: Support unpack facility Janosch Frank
2019-11-20 13:43   ` Cornelia Huck
2019-11-21 11:33     ` Janosch Frank
2019-11-21 11:27   ` David Hildenbrand
2019-11-21 14:25     ` Janosch Frank
2019-11-21 14:28       ` David Hildenbrand
2019-11-21 14:31         ` Christian Borntraeger
2019-11-21 14:32           ` Janosch Frank
2019-11-22 13:39   ` Cornelia Huck
2019-11-22 13:49     ` Janosch Frank
2019-11-28 14:07   ` Thomas Huth
2019-11-28 14:20     ` Janosch Frank
2019-11-20 11:43 ` [PATCH 07/15] s390x: protvirt: Handle diag 308 subcodes 0,1,3,4 Janosch Frank
2019-11-21 13:50   ` Cornelia Huck
2019-11-21 14:00     ` Janosch Frank
2019-11-21 14:04     ` Janosch Frank
2019-11-21 14:17       ` Cornelia Huck
2019-11-21 14:23         ` Janosch Frank
2019-11-20 11:43 ` [PATCH 08/15] s390x: protvirt: KVM intercept changes Janosch Frank
2019-11-21 14:07   ` Cornelia Huck
2019-11-21 14:29     ` Janosch Frank
2019-11-21 15:11   ` Thomas Huth
2019-11-28 16:38     ` Janosch Frank
2019-11-28 16:45       ` Cornelia Huck
2019-11-28 16:54         ` Janosch Frank
2019-11-20 11:43 ` [PATCH 09/15] s390x: protvirt: SCLP interpretation Janosch Frank
2019-11-21 14:11   ` Cornelia Huck
2019-11-21 14:24     ` Janosch Frank
2019-11-22 13:48       ` Pierre Morel
2019-11-20 11:43 ` [PATCH 10/15] s390x: protvirt: Add new VCPU reset functions Janosch Frank
2019-11-20 11:43 ` [PATCH 11/15] RFC: s390x: Exit on vcpu reset error Janosch Frank
2019-11-21 12:14   ` David Hildenbrand
2019-11-21 12:19     ` Janosch Frank
2019-11-21 12:22       ` David Hildenbrand
2019-11-20 11:43 ` [PATCH 12/15] s390x: protvirt: Set guest IPL PSW Janosch Frank
2019-11-28 14:30   ` Thomas Huth
2019-11-28 15:39     ` Janosch Frank
2019-11-20 11:43 ` [PATCH 13/15] s390x: protvirt: Move diag 308 data over SIDAD Janosch Frank
2019-11-28 14:40   ` Thomas Huth
2019-11-28 16:08     ` Janosch Frank
2019-11-28 16:14       ` David Hildenbrand
2019-11-20 11:43 ` [PATCH 14/15] s390x: protvirt: Disable address checks for PV guest IO emulation Janosch Frank
2019-11-28 15:28   ` Thomas Huth
2019-11-28 15:36     ` Janosch Frank
2019-11-28 16:10     ` Janosch Frank
2019-11-28 16:18       ` Cornelia Huck
2019-11-28 16:24         ` Janosch Frank
2019-11-28 20:08       ` Thomas Huth
2019-11-20 11:43 ` [PATCH 15/15] s390x: protvirt: Handle SIGP store status correctly Janosch Frank
2019-11-21 11:24   ` David Hildenbrand
2019-11-21 11:29     ` Janosch Frank
2019-11-28 15:30   ` Thomas Huth
2019-11-20 13:26 ` [PATCH 00/15] s390x: Protected Virtualization support Cornelia Huck
2019-11-20 13:33   ` Janosch Frank
2019-11-21  9:13   ` Janosch Frank
2019-11-21  9:39     ` Cornelia Huck
2019-11-29 11:08 ` Daniel P. Berrangé
2019-11-29 12:14   ` Janosch Frank
2019-11-29 12:35     ` Daniel P. Berrangé
2019-11-29 14:02       ` Janosch Frank
2019-11-29 14:30         ` Viktor Mihajlovski
2019-12-03 10:49         ` Daniel P. Berrangé

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191120114334.2287-4-frankja@linux.ibm.com \
    --to=frankja@linux.ibm.com \
    --cc=borntraeger@de.ibm.com \
    --cc=cohuck@redhat.com \
    --cc=david@redhat.com \
    --cc=mihajlov@linux.ibm.com \
    --cc=pmorel@linux.ibm.com \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-s390x@nongnu.org \
    --cc=thuth@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).