From: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, vsementsov@virtuozzo.com,
qemu-devel@nongnu.org, mreitz@redhat.com, den@openvz.org,
jsnow@redhat.com
Subject: [PATCH v2 6/7] block/block-copy: reduce intersecting request lock
Date: Wed, 27 Nov 2019 21:08:39 +0300 [thread overview]
Message-ID: <20191127180840.11937-7-vsementsov@virtuozzo.com> (raw)
In-Reply-To: <20191127180840.11937-1-vsementsov@virtuozzo.com>
Currently, block_copy operation lock the whole requested region. But
there is no reason to lock clusters, which are already copied, it will
disturb other parallel block_copy requests for no reason.
Let's instead do the following:
Lock only sub-region, which we are going to operate on. Then, after
copying all dirty sub-regions, we should wait for intersecting
requests block-copy, if they failed, we should retry these new dirty
clusters.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
---
block/block-copy.c | 116 +++++++++++++++++++++++++++++++++++++--------
1 file changed, 95 insertions(+), 21 deletions(-)
diff --git a/block/block-copy.c b/block/block-copy.c
index 20068cd699..aca44b13fb 100644
--- a/block/block-copy.c
+++ b/block/block-copy.c
@@ -39,29 +39,62 @@ static BlockCopyInFlightReq *block_copy_find_inflight_req(BlockCopyState *s,
return NULL;
}
-static void coroutine_fn block_copy_wait_inflight_reqs(BlockCopyState *s,
- int64_t offset,
- int64_t bytes)
+/*
+ * If there are no intersecting requests return false. Otherwise, wait for the
+ * first found intersecting request to finish and return true.
+ */
+static bool coroutine_fn block_copy_wait_one(BlockCopyState *s, int64_t start,
+ int64_t end)
{
- BlockCopyInFlightReq *req;
+ BlockCopyInFlightReq *req = block_copy_find_inflight_req(s, start, end);
- while ((req = block_copy_find_inflight_req(s, offset, bytes))) {
- qemu_co_queue_wait(&req->wait_queue, NULL);
+ if (!req) {
+ return false;
}
+
+ qemu_co_queue_wait(&req->wait_queue, NULL);
+
+ return true;
}
+/* Called only on full-dirty region */
static void block_copy_inflight_req_begin(BlockCopyState *s,
BlockCopyInFlightReq *req,
int64_t offset, int64_t bytes)
{
+ assert(!block_copy_find_inflight_req(s, offset, bytes));
+
+ bdrv_reset_dirty_bitmap(s->copy_bitmap, offset, bytes);
+
req->offset = offset;
req->bytes = bytes;
qemu_co_queue_init(&req->wait_queue);
QLIST_INSERT_HEAD(&s->inflight_reqs, req, list);
}
-static void coroutine_fn block_copy_inflight_req_end(BlockCopyInFlightReq *req)
+static void coroutine_fn block_copy_inflight_req_shrink(BlockCopyState *s,
+ BlockCopyInFlightReq *req, int64_t new_bytes)
{
+ if (new_bytes == req->bytes) {
+ return;
+ }
+
+ assert(new_bytes > 0 && new_bytes < req->bytes);
+
+ bdrv_set_dirty_bitmap(s->copy_bitmap,
+ req->offset + new_bytes, req->bytes - new_bytes);
+
+ req->bytes = new_bytes;
+ qemu_co_queue_restart_all(&req->wait_queue);
+}
+
+static void coroutine_fn block_copy_inflight_req_end(BlockCopyState *s,
+ BlockCopyInFlightReq *req,
+ int ret)
+{
+ if (ret < 0) {
+ bdrv_set_dirty_bitmap(s->copy_bitmap, req->offset, req->bytes);
+ }
QLIST_REMOVE(req, list);
qemu_co_queue_restart_all(&req->wait_queue);
}
@@ -344,12 +377,19 @@ int64_t block_copy_reset_unallocated(BlockCopyState *s,
return ret;
}
-int coroutine_fn block_copy(BlockCopyState *s,
- int64_t offset, uint64_t bytes,
- bool *error_is_read)
+/*
+ * block_copy_dirty_clusters
+ *
+ * Copy dirty clusters in @start/@bytes range.
+ * Returns 1 if dirty clusters found and successfully copied, 0 if no dirty
+ * clusters found and -errno on failure.
+ */
+static int coroutine_fn block_copy_dirty_clusters(BlockCopyState *s,
+ int64_t offset, int64_t bytes,
+ bool *error_is_read)
{
int ret = 0;
- BlockCopyInFlightReq req;
+ bool found_dirty = false;
/*
* block_copy() user is responsible for keeping source and target in same
@@ -361,10 +401,8 @@ int coroutine_fn block_copy(BlockCopyState *s,
assert(QEMU_IS_ALIGNED(offset, s->cluster_size));
assert(QEMU_IS_ALIGNED(bytes, s->cluster_size));
- block_copy_wait_inflight_reqs(s, offset, bytes);
- block_copy_inflight_req_begin(s, &req, offset, bytes);
-
while (bytes) {
+ BlockCopyInFlightReq req;
int64_t next_zero, cur_bytes, status_bytes;
if (!bdrv_dirty_bitmap_get(s->copy_bitmap, offset)) {
@@ -374,6 +412,8 @@ int coroutine_fn block_copy(BlockCopyState *s,
continue; /* already copied */
}
+ found_dirty = true;
+
cur_bytes = MIN(bytes, s->copy_size);
next_zero = bdrv_dirty_bitmap_next_zero(s->copy_bitmap, offset,
@@ -383,10 +423,12 @@ int coroutine_fn block_copy(BlockCopyState *s,
assert(next_zero < offset + cur_bytes); /* no need to do MIN() */
cur_bytes = next_zero - offset;
}
+ block_copy_inflight_req_begin(s, &req, offset, cur_bytes);
ret = block_copy_block_status(s, offset, cur_bytes, &status_bytes);
+ block_copy_inflight_req_shrink(s, &req, status_bytes);
if (s->skip_unallocated && !(ret & BDRV_BLOCK_ALLOCATED)) {
- bdrv_reset_dirty_bitmap(s->copy_bitmap, offset, status_bytes);
+ block_copy_inflight_req_end(s, &req, 0);
s->progress_reset_callback(s->progress_opaque);
trace_block_copy_skip_range(s, offset, status_bytes);
offset += status_bytes;
@@ -398,15 +440,13 @@ int coroutine_fn block_copy(BlockCopyState *s,
trace_block_copy_process(s, offset);
- bdrv_reset_dirty_bitmap(s->copy_bitmap, offset, cur_bytes);
-
co_get_from_shres(s->mem, cur_bytes);
ret = block_copy_do_copy(s, offset, cur_bytes, ret & BDRV_BLOCK_ZERO,
error_is_read);
co_put_to_shres(s->mem, cur_bytes);
+ block_copy_inflight_req_end(s, &req, ret);
if (ret < 0) {
- bdrv_set_dirty_bitmap(s->copy_bitmap, offset, cur_bytes);
- break;
+ return ret;
}
s->progress_bytes_callback(cur_bytes, s->progress_opaque);
@@ -414,7 +454,41 @@ int coroutine_fn block_copy(BlockCopyState *s,
bytes -= cur_bytes;
}
- block_copy_inflight_req_end(&req);
+ return found_dirty;
+}
- return ret;
+int coroutine_fn block_copy(BlockCopyState *s, int64_t start, uint64_t bytes,
+ bool *error_is_read)
+{
+ while (true) {
+ int ret = block_copy_dirty_clusters(s, start, bytes, error_is_read);
+
+ if (ret < 0) {
+ /*
+ * IO operation failed, which means the whole block_copy request
+ * failed.
+ */
+ return ret;
+ }
+ if (ret) {
+ /*
+ * Something was copied, which means that there were yield points
+ * and some new dirty bits may appered (due to failed parallel
+ * block-copy requests).
+ */
+ continue;
+ }
+
+ /*
+ * Here ret == 0, which means that there is no dirty clusters in
+ * requested region.
+ */
+
+ if (!block_copy_wait_one(s, start, bytes)) {
+ /* No dirty bits and nothing to wait: the whole request is done */
+ break;
+ }
+ }
+
+ return 0;
}
--
2.21.0
next prev parent reply other threads:[~2019-11-27 18:25 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-27 18:08 [PATCH v2 for-5.0 0/7] block-copy improvements: part I Vladimir Sementsov-Ogievskiy
2019-11-27 18:08 ` [PATCH v2 1/7] block/block-copy: specialcase first copy_range request Vladimir Sementsov-Ogievskiy
2020-01-29 7:38 ` Andrey Shinkevich
2020-02-07 17:28 ` Max Reitz
2020-02-08 12:32 ` Vladimir Sementsov-Ogievskiy
2019-11-27 18:08 ` [PATCH v2 2/7] block/block-copy: use block_status Vladimir Sementsov-Ogievskiy
2020-01-29 9:12 ` Andrey Shinkevich
2020-02-07 17:46 ` Max Reitz
2020-02-08 12:25 ` Vladimir Sementsov-Ogievskiy
2020-02-17 11:48 ` Max Reitz
2019-11-27 18:08 ` [PATCH v2 3/7] block/block-copy: factor out block_copy_find_inflight_req Vladimir Sementsov-Ogievskiy
2020-01-29 9:25 ` Andrey Shinkevich
2020-02-07 17:50 ` Max Reitz
2019-11-27 18:08 ` [PATCH v2 4/7] block/block-copy: refactor interfaces to use bytes instead of end Vladimir Sementsov-Ogievskiy
2020-01-29 17:12 ` Andrey Shinkevich
2020-02-05 11:36 ` Vladimir Sementsov-Ogievskiy
2020-02-07 18:01 ` Max Reitz
2020-02-08 12:55 ` Vladimir Sementsov-Ogievskiy
2019-11-27 18:08 ` [PATCH v2 5/7] block/block-copy: rename start to offset in interfaces Vladimir Sementsov-Ogievskiy
2020-01-29 17:37 ` Andrey Shinkevich
2020-02-07 18:04 ` Max Reitz
2019-11-27 18:08 ` Vladimir Sementsov-Ogievskiy [this message]
2020-01-29 20:05 ` [PATCH v2 6/7] block/block-copy: reduce intersecting request lock Andrey Shinkevich
2020-01-30 13:45 ` Vladimir Sementsov-Ogievskiy
2020-01-30 16:24 ` Andrey Shinkevich
2020-01-30 17:09 ` Vladimir Sementsov-Ogievskiy
2020-01-30 18:00 ` Andrey Shinkevich
2020-01-30 15:53 ` Andrey Shinkevich
2020-01-30 16:05 ` Vladimir Sementsov-Ogievskiy
2020-02-17 13:38 ` Max Reitz
2020-02-20 7:21 ` Vladimir Sementsov-Ogievskiy
2020-02-20 9:10 ` Max Reitz
2019-11-27 18:08 ` [PATCH v2 7/7] block/block-copy: hide structure definitions Vladimir Sementsov-Ogievskiy
2020-01-30 18:58 ` Andrey Shinkevich
2020-02-17 14:04 ` Max Reitz
2020-02-20 7:26 ` Vladimir Sementsov-Ogievskiy
2019-12-19 9:01 ` [PATCH v2 for-5.0 0/7] block-copy improvements: part I Vladimir Sementsov-Ogievskiy
2020-01-20 9:09 ` Vladimir Sementsov-Ogievskiy
2020-02-07 18:05 ` Max Reitz
2020-02-08 10:28 ` Vladimir Sementsov-Ogievskiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191127180840.11937-7-vsementsov@virtuozzo.com \
--to=vsementsov@virtuozzo.com \
--cc=den@openvz.org \
--cc=jsnow@redhat.com \
--cc=kwolf@redhat.com \
--cc=mreitz@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).