* [Bug 1855617] [NEW] savevm with hax saves wrong register state
@ 2019-12-08 20:45 Alex
2019-12-09 10:17 ` Dr. David Alan Gilbert
` (3 more replies)
0 siblings, 4 replies; 6+ messages in thread
From: Alex @ 2019-12-08 20:45 UTC (permalink / raw)
To: qemu-devel
Public bug reported:
I use qemu-i386 with IntelHaxm on Windows 10 x64 host with Windows 7 x86 guest. I run the guest till OS loads and create a snapshot with savevm, then close qemu, run it again and try to load the snapshot with loadvm. The guest crashes or freezes. I dumped registers on snapshot creation and loading (in Haxm) and found that they are different.
When returning from Haxm in hax_vcpu_hax_exec, there is no regular register read. I found hax_arch_get_registers function which reads registers from Haxm and is called from a synchronization procedure. I placed a breakpoint on it, ran qemu and found that it is hit one time during guest OS boot. Exactly these registers where saved in the snapshot.
** Affects: qemu
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1855617
Title:
savevm with hax saves wrong register state
Status in QEMU:
New
Bug description:
I use qemu-i386 with IntelHaxm on Windows 10 x64 host with Windows 7 x86 guest. I run the guest till OS loads and create a snapshot with savevm, then close qemu, run it again and try to load the snapshot with loadvm. The guest crashes or freezes. I dumped registers on snapshot creation and loading (in Haxm) and found that they are different.
When returning from Haxm in hax_vcpu_hax_exec, there is no regular register read. I found hax_arch_get_registers function which reads registers from Haxm and is called from a synchronization procedure. I placed a breakpoint on it, ran qemu and found that it is hit one time during guest OS boot. Exactly these registers where saved in the snapshot.
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1855617/+subscriptions
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [Bug 1855617] [NEW] savevm with hax saves wrong register state
2019-12-08 20:45 [Bug 1855617] [NEW] savevm with hax saves wrong register state Alex
@ 2019-12-09 10:17 ` Dr. David Alan Gilbert
2019-12-09 10:17 ` Dr. David Alan Gilbert
2021-04-22 9:05 ` [Bug 1855617] " Thomas Huth
` (2 subsequent siblings)
3 siblings, 1 reply; 6+ messages in thread
From: Dr. David Alan Gilbert @ 2019-12-09 10:17 UTC (permalink / raw)
To: colin.xu, yu.ning; +Cc: qemu-devel, Bug 1855617
cc'ing Colin and Yu for Hax info:
* Alex (1855617@bugs.launchpad.net) wrote:
> Public bug reported:
>
> I use qemu-i386 with IntelHaxm on Windows 10 x64 host with Windows 7 x86 guest. I run the guest till OS loads and create a snapshot with savevm, then close qemu, run it again and try to load the snapshot with loadvm. The guest crashes or freezes. I dumped registers on snapshot creation and loading (in Haxm) and found that they are different.
> When returning from Haxm in hax_vcpu_hax_exec, there is no regular register read. I found hax_arch_get_registers function which reads registers from Haxm and is called from a synchronization procedure. I placed a breakpoint on it, ran qemu and found that it is hit one time during guest OS boot. Exactly these registers where saved in the snapshot.
>
> ** Affects: qemu
> Importance: Undecided
> Status: New
>
> --
> You received this bug notification because you are a member of qemu-
> devel-ml, which is subscribed to QEMU.
> https://bugs.launchpad.net/bugs/1855617
>
> Title:
> savevm with hax saves wrong register state
>
> Status in QEMU:
> New
>
> Bug description:
> I use qemu-i386 with IntelHaxm on Windows 10 x64 host with Windows 7 x86 guest. I run the guest till OS loads and create a snapshot with savevm, then close qemu, run it again and try to load the snapshot with loadvm. The guest crashes or freezes. I dumped registers on snapshot creation and loading (in Haxm) and found that they are different.
> When returning from Haxm in hax_vcpu_hax_exec, there is no regular register read. I found hax_arch_get_registers function which reads registers from Haxm and is called from a synchronization procedure. I placed a breakpoint on it, ran qemu and found that it is hit one time during guest OS boot. Exactly these registers where saved in the snapshot.
>
> To manage notifications about this bug go to:
> https://bugs.launchpad.net/qemu/+bug/1855617/+subscriptions
>
--
Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [Bug 1855617] [NEW] savevm with hax saves wrong register state
2019-12-09 10:17 ` Dr. David Alan Gilbert
@ 2019-12-09 10:17 ` Dr. David Alan Gilbert
0 siblings, 0 replies; 6+ messages in thread
From: Dr. David Alan Gilbert @ 2019-12-09 10:17 UTC (permalink / raw)
To: qemu-devel
cc'ing Colin and Yu for Hax info:
* Alex (1855617@bugs.launchpad.net) wrote:
> Public bug reported:
>
> I use qemu-i386 with IntelHaxm on Windows 10 x64 host with Windows 7 x86 guest. I run the guest till OS loads and create a snapshot with savevm, then close qemu, run it again and try to load the snapshot with loadvm. The guest crashes or freezes. I dumped registers on snapshot creation and loading (in Haxm) and found that they are different.
> When returning from Haxm in hax_vcpu_hax_exec, there is no regular register read. I found hax_arch_get_registers function which reads registers from Haxm and is called from a synchronization procedure. I placed a breakpoint on it, ran qemu and found that it is hit one time during guest OS boot. Exactly these registers where saved in the snapshot.
>
> ** Affects: qemu
> Importance: Undecided
> Status: New
>
> --
> You received this bug notification because you are a member of qemu-
> devel-ml, which is subscribed to QEMU.
> https://bugs.launchpad.net/bugs/1855617
>
> Title:
> savevm with hax saves wrong register state
>
> Status in QEMU:
> New
>
> Bug description:
> I use qemu-i386 with IntelHaxm on Windows 10 x64 host with Windows 7 x86 guest. I run the guest till OS loads and create a snapshot with savevm, then close qemu, run it again and try to load the snapshot with loadvm. The guest crashes or freezes. I dumped registers on snapshot creation and loading (in Haxm) and found that they are different.
> When returning from Haxm in hax_vcpu_hax_exec, there is no regular register read. I found hax_arch_get_registers function which reads registers from Haxm and is called from a synchronization procedure. I placed a breakpoint on it, ran qemu and found that it is hit one time during guest OS boot. Exactly these registers where saved in the snapshot.
>
> To manage notifications about this bug go to:
> https://bugs.launchpad.net/qemu/+bug/1855617/+subscriptions
>
--
Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1855617
Title:
savevm with hax saves wrong register state
Status in QEMU:
New
Bug description:
I use qemu-i386 with IntelHaxm on Windows 10 x64 host with Windows 7 x86 guest. I run the guest till OS loads and create a snapshot with savevm, then close qemu, run it again and try to load the snapshot with loadvm. The guest crashes or freezes. I dumped registers on snapshot creation and loading (in Haxm) and found that they are different.
When returning from Haxm in hax_vcpu_hax_exec, there is no regular register read. I found hax_arch_get_registers function which reads registers from Haxm and is called from a synchronization procedure. I placed a breakpoint on it, ran qemu and found that it is hit one time during guest OS boot. Exactly these registers where saved in the snapshot.
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1855617/+subscriptions
^ permalink raw reply [flat|nested] 6+ messages in thread
* [Bug 1855617] Re: savevm with hax saves wrong register state
2019-12-08 20:45 [Bug 1855617] [NEW] savevm with hax saves wrong register state Alex
2019-12-09 10:17 ` Dr. David Alan Gilbert
@ 2021-04-22 9:05 ` Thomas Huth
2021-04-24 17:53 ` Alex
2021-05-06 8:19 ` Thomas Huth
3 siblings, 0 replies; 6+ messages in thread
From: Thomas Huth @ 2021-04-22 9:05 UTC (permalink / raw)
To: qemu-devel
The QEMU project is currently considering to move its bug tracking to
another system. For this we need to know which bugs are still valid
and which could be closed already. Thus we are setting older bugs to
"Incomplete" now.
If you still think this bug report here is valid, then please switch
the state back to "New" within the next 60 days, otherwise this report
will be marked as "Expired". Or please mark it as "Fix Released" if
the problem has been solved with a newer version of QEMU already.
Thank you and sorry for the inconvenience.
** Changed in: qemu
Status: New => Incomplete
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1855617
Title:
savevm with hax saves wrong register state
Status in QEMU:
Incomplete
Bug description:
I use qemu-i386 with IntelHaxm on Windows 10 x64 host with Windows 7 x86 guest. I run the guest till OS loads and create a snapshot with savevm, then close qemu, run it again and try to load the snapshot with loadvm. The guest crashes or freezes. I dumped registers on snapshot creation and loading (in Haxm) and found that they are different.
When returning from Haxm in hax_vcpu_hax_exec, there is no regular register read. I found hax_arch_get_registers function which reads registers from Haxm and is called from a synchronization procedure. I placed a breakpoint on it, ran qemu and found that it is hit one time during guest OS boot. Exactly these registers where saved in the snapshot.
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1855617/+subscriptions
^ permalink raw reply [flat|nested] 6+ messages in thread* [Bug 1855617] Re: savevm with hax saves wrong register state
2019-12-08 20:45 [Bug 1855617] [NEW] savevm with hax saves wrong register state Alex
2019-12-09 10:17 ` Dr. David Alan Gilbert
2021-04-22 9:05 ` [Bug 1855617] " Thomas Huth
@ 2021-04-24 17:53 ` Alex
2021-05-06 8:19 ` Thomas Huth
3 siblings, 0 replies; 6+ messages in thread
From: Alex @ 2021-04-24 17:53 UTC (permalink / raw)
To: qemu-devel
** Changed in: qemu
Status: Incomplete => New
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1855617
Title:
savevm with hax saves wrong register state
Status in QEMU:
New
Bug description:
I use qemu-i386 with IntelHaxm on Windows 10 x64 host with Windows 7 x86 guest. I run the guest till OS loads and create a snapshot with savevm, then close qemu, run it again and try to load the snapshot with loadvm. The guest crashes or freezes. I dumped registers on snapshot creation and loading (in Haxm) and found that they are different.
When returning from Haxm in hax_vcpu_hax_exec, there is no regular register read. I found hax_arch_get_registers function which reads registers from Haxm and is called from a synchronization procedure. I placed a breakpoint on it, ran qemu and found that it is hit one time during guest OS boot. Exactly these registers where saved in the snapshot.
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1855617/+subscriptions
^ permalink raw reply [flat|nested] 6+ messages in thread* [Bug 1855617] Re: savevm with hax saves wrong register state
2019-12-08 20:45 [Bug 1855617] [NEW] savevm with hax saves wrong register state Alex
` (2 preceding siblings ...)
2021-04-24 17:53 ` Alex
@ 2021-05-06 8:19 ` Thomas Huth
3 siblings, 0 replies; 6+ messages in thread
From: Thomas Huth @ 2021-05-06 8:19 UTC (permalink / raw)
To: qemu-devel
This is an automated cleanup. This bug report has been moved to QEMU's
new bug tracker on gitlab.com and thus gets marked as 'expired' now.
Please continue with the discussion here:
https://gitlab.com/qemu-project/qemu/-/issues/188
** Changed in: qemu
Status: New => Expired
** Bug watch added: gitlab.com/qemu-project/qemu/-/issues #188
https://gitlab.com/qemu-project/qemu/-/issues/188
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1855617
Title:
savevm with hax saves wrong register state
Status in QEMU:
Expired
Bug description:
I use qemu-i386 with IntelHaxm on Windows 10 x64 host with Windows 7 x86 guest. I run the guest till OS loads and create a snapshot with savevm, then close qemu, run it again and try to load the snapshot with loadvm. The guest crashes or freezes. I dumped registers on snapshot creation and loading (in Haxm) and found that they are different.
When returning from Haxm in hax_vcpu_hax_exec, there is no regular register read. I found hax_arch_get_registers function which reads registers from Haxm and is called from a synchronization procedure. I placed a breakpoint on it, ran qemu and found that it is hit one time during guest OS boot. Exactly these registers where saved in the snapshot.
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1855617/+subscriptions
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-05-06 8:27 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-12-08 20:45 [Bug 1855617] [NEW] savevm with hax saves wrong register state Alex
2019-12-09 10:17 ` Dr. David Alan Gilbert
2019-12-09 10:17 ` Dr. David Alan Gilbert
2021-04-22 9:05 ` [Bug 1855617] " Thomas Huth
2021-04-24 17:53 ` Alex
2021-05-06 8:19 ` Thomas Huth
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).