From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: qemu-s390x@nongnu.org, david@redhat.com
Subject: [PATCH 2/2] target/s390x: Implement LOAD/STORE TO REAL ADDRESS inline
Date: Wed, 11 Dec 2019 12:36:14 -0800 [thread overview]
Message-ID: <20191211203614.15611-3-richard.henderson@linaro.org> (raw)
In-Reply-To: <20191211203614.15611-1-richard.henderson@linaro.org>
These are trivially done by performing a memory operation
with the correct mmu_idx. The only tricky part is using
get_address directly in order to get the address wrapped;
we cannot use la2 because of the format.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
target/s390x/helper.h | 4 ----
target/s390x/mem_helper.c | 22 ----------------------
target/s390x/translate.c | 21 ++++-----------------
target/s390x/insn-data.def | 8 ++++----
4 files changed, 8 insertions(+), 47 deletions(-)
diff --git a/target/s390x/helper.h b/target/s390x/helper.h
index f5b4bb6a31..b5813c2ac2 100644
--- a/target/s390x/helper.h
+++ b/target/s390x/helper.h
@@ -324,10 +324,6 @@ DEF_HELPER_FLAGS_4(ipte, TCG_CALL_NO_RWG, void, env, i64, i64, i32)
DEF_HELPER_FLAGS_1(ptlb, TCG_CALL_NO_RWG, void, env)
DEF_HELPER_FLAGS_1(purge, TCG_CALL_NO_RWG, void, env)
DEF_HELPER_2(lra, i64, env, i64)
-DEF_HELPER_FLAGS_2(lura, TCG_CALL_NO_WG, i64, env, i64)
-DEF_HELPER_FLAGS_2(lurag, TCG_CALL_NO_WG, i64, env, i64)
-DEF_HELPER_FLAGS_3(stura, TCG_CALL_NO_WG, void, env, i64, i64)
-DEF_HELPER_FLAGS_3(sturg, TCG_CALL_NO_WG, void, env, i64, i64)
DEF_HELPER_1(per_check_exception, void, env)
DEF_HELPER_FLAGS_3(per_branch, TCG_CALL_NO_RWG, void, env, i64, i64)
DEF_HELPER_FLAGS_2(per_ifetch, TCG_CALL_NO_RWG, void, env, i64)
diff --git a/target/s390x/mem_helper.c b/target/s390x/mem_helper.c
index b1b3f406c9..2921419c27 100644
--- a/target/s390x/mem_helper.c
+++ b/target/s390x/mem_helper.c
@@ -2329,28 +2329,6 @@ void HELPER(purge)(CPUS390XState *env)
tlb_flush_all_cpus_synced(env_cpu(env));
}
-/* load using real address */
-uint64_t HELPER(lura)(CPUS390XState *env, uint64_t addr)
-{
- return cpu_ldl_real_ra(env, wrap_address(env, addr), GETPC());
-}
-
-uint64_t HELPER(lurag)(CPUS390XState *env, uint64_t addr)
-{
- return cpu_ldq_real_ra(env, wrap_address(env, addr), GETPC());
-}
-
-/* store using real address */
-void HELPER(stura)(CPUS390XState *env, uint64_t addr, uint64_t v1)
-{
- cpu_stl_real_ra(env, wrap_address(env, addr), (uint32_t)v1, GETPC());
-}
-
-void HELPER(sturg)(CPUS390XState *env, uint64_t addr, uint64_t v1)
-{
- cpu_stq_real_ra(env, wrap_address(env, addr), v1, GETPC());
-}
-
/* load real address */
uint64_t HELPER(lra)(CPUS390XState *env, uint64_t addr)
{
diff --git a/target/s390x/translate.c b/target/s390x/translate.c
index ef751fefa4..4292bb0dd0 100644
--- a/target/s390x/translate.c
+++ b/target/s390x/translate.c
@@ -3272,13 +3272,8 @@ static DisasJumpType op_lpq(DisasContext *s, DisasOps *o)
#ifndef CONFIG_USER_ONLY
static DisasJumpType op_lura(DisasContext *s, DisasOps *o)
{
- gen_helper_lura(o->out, cpu_env, o->in2);
- return DISAS_NEXT;
-}
-
-static DisasJumpType op_lurag(DisasContext *s, DisasOps *o)
-{
- gen_helper_lurag(o->out, cpu_env, o->in2);
+ o->addr1 = get_address(s, 0, get_field(s->fields, r2), 0);
+ tcg_gen_qemu_ld_tl(o->out, o->addr1, MMU_REAL_IDX, s->insn->data);
return DISAS_NEXT;
}
#endif
@@ -4506,17 +4501,9 @@ static DisasJumpType op_stnosm(DisasContext *s, DisasOps *o)
static DisasJumpType op_stura(DisasContext *s, DisasOps *o)
{
- gen_helper_stura(cpu_env, o->in2, o->in1);
- if (s->base.tb->flags & FLAG_MASK_PER) {
- update_psw_addr(s);
- gen_helper_per_store_real(cpu_env);
- }
- return DISAS_NEXT;
-}
+ o->addr1 = get_address(s, 0, get_field(s->fields, r2), 0);
+ tcg_gen_qemu_st_tl(o->in1, o->addr1, MMU_REAL_IDX, s->insn->data);
-static DisasJumpType op_sturg(DisasContext *s, DisasOps *o)
-{
- gen_helper_sturg(cpu_env, o->in2, o->in1);
if (s->base.tb->flags & FLAG_MASK_PER) {
update_psw_addr(s);
gen_helper_per_store_real(cpu_env);
diff --git a/target/s390x/insn-data.def b/target/s390x/insn-data.def
index 449eee1662..2bc77f0871 100644
--- a/target/s390x/insn-data.def
+++ b/target/s390x/insn-data.def
@@ -1275,8 +1275,8 @@
F(0xe313, LRAY, RXY_a, LD, 0, a2, r1, 0, lra, 0, IF_PRIV)
F(0xe303, LRAG, RXY_a, Z, 0, a2, r1, 0, lra, 0, IF_PRIV)
/* LOAD USING REAL ADDRESS */
- F(0xb24b, LURA, RRE, Z, 0, r2, new, r1_32, lura, 0, IF_PRIV)
- F(0xb905, LURAG, RRE, Z, 0, r2, r1, 0, lurag, 0, IF_PRIV)
+ E(0xb24b, LURA, RRE, Z, 0, 0, new, r1_32, lura, 0, MO_TEUL, IF_PRIV)
+ E(0xb905, LURAG, RRE, Z, 0, 0, r1, 0, lura, 0, MO_TEQ, IF_PRIV)
/* MOVE TO PRIMARY */
F(0xda00, MVCP, SS_d, Z, la1, a2, 0, 0, mvcp, 0, IF_PRIV)
/* MOVE TO SECONDARY */
@@ -1329,8 +1329,8 @@
/* STORE THEN OR SYSTEM MASK */
F(0xad00, STOSM, SI, Z, la1, 0, 0, 0, stnosm, 0, IF_PRIV)
/* STORE USING REAL ADDRESS */
- F(0xb246, STURA, RRE, Z, r1_o, r2_o, 0, 0, stura, 0, IF_PRIV)
- F(0xb925, STURG, RRE, Z, r1_o, r2_o, 0, 0, sturg, 0, IF_PRIV)
+ E(0xb246, STURA, RRE, Z, r1_o, 0, 0, 0, stura, 0, MO_TEUL, IF_PRIV)
+ E(0xb925, STURG, RRE, Z, r1_o, 0, 0, 0, stura, 0, MO_TEQ, IF_PRIV)
/* TEST BLOCK */
F(0xb22c, TB, RRE, Z, 0, r2_o, 0, 0, testblock, 0, IF_PRIV)
/* TEST PROTECTION */
--
2.20.1
next prev parent reply other threads:[~2019-12-11 20:38 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-11 20:36 [PATCH 0/2] target/s390x: Implement LOAD/STORE TO REAL ADDRESS inline Richard Henderson
2019-12-11 20:36 ` [PATCH 1/2] target/s390x: Split out helper_per_store_real Richard Henderson
2019-12-12 10:29 ` David Hildenbrand
2019-12-11 20:36 ` Richard Henderson [this message]
2019-12-12 10:35 ` [PATCH 2/2] target/s390x: Implement LOAD/STORE TO REAL ADDRESS inline David Hildenbrand
2019-12-16 17:04 ` [PATCH 0/2] " Cornelia Huck
2019-12-16 20:23 ` Richard Henderson
2019-12-17 10:01 ` Cornelia Huck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191211203614.15611-3-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=david@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-s390x@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).