From: "Alex Bennée" <alex.bennee@linaro.org>
To: peter.maydell@linaro.org
Cc: "Fam Zheng" <fam@euphon.net>, "Thomas Huth" <thuth@redhat.com>,
"Stefan Weil" <sw@weilnetz.de>,
"Richard Henderson" <richard.henderson@linaro.org>,
qemu-devel@nongnu.org,
"Philippe Mathieu-Daudé" <philmd@redhat.com>,
"Alex Bennée" <alex.bennee@linaro.org>
Subject: [PULL 03/25] travis.yml: Run tcg tests with tci
Date: Thu, 19 Dec 2019 10:49:12 +0000 [thread overview]
Message-ID: <20191219104934.866-4-alex.bennee@linaro.org> (raw)
In-Reply-To: <20191219104934.866-1-alex.bennee@linaro.org>
From: Thomas Huth <thuth@redhat.com>
So far we only have compile coverage for tci. But since commit
2f160e0f9797c7522bfd0d09218d0c9340a5137c ("tci: Add implementation
for INDEX_op_ld16u_i64") has been included now, we can also run the
"tcg" and "qtest" tests with tci, so let's enable them in Travis now.
Since we don't gain much additional test coverage by compiling all
targets, and TCI is broken e.g. with the Sparc targets, we also limit
the target list to a reasonable subset now (which should still get us
test coverage by tests/boot-serial-test for example).
Tested-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191204083133.6198-1-thuth@redhat.com>
[AJB: just --enable-debug-tcg]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
diff --git a/.travis.yml b/.travis.yml
index 6cb8af6fa59..15946293ff3 100644
--- a/.travis.yml
+++ b/.travis.yml
@@ -214,10 +214,11 @@ matrix:
- TEST_CMD=""
- # We manually include builds which we disable "make check" for
+ # Check the TCG interpreter (TCI)
- env:
- - CONFIG="--enable-debug --enable-tcg-interpreter"
- - TEST_CMD=""
+ - CONFIG="--enable-debug-tcg --enable-tcg-interpreter --disable-kvm --disable-containers
+ --target-list=alpha-softmmu,arm-softmmu,hppa-softmmu,m68k-softmmu,microblaze-softmmu,moxie-softmmu,ppc-softmmu,s390x-softmmu,x86_64-softmmu"
+ - TEST_CMD="make check-qtest check-tcg V=1"
# We don't need to exercise every backend with every front-end
--
2.20.1
next prev parent reply other threads:[~2019-12-19 10:51 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-19 10:49 [PULL 00/25] testing and logging updates Alex Bennée
2019-12-19 10:49 ` [PULL 01/25] configure: allow disable of cross compilation containers Alex Bennée
2019-12-19 10:49 ` [PULL 02/25] tests/vm: Allow to set qemu-img path Alex Bennée
2019-12-19 10:49 ` Alex Bennée [this message]
2019-12-19 10:49 ` [PULL 04/25] iotests: Provide a function for checking the creation of huge files Alex Bennée
2019-12-19 10:49 ` [PULL 05/25] iotests: Skip test 060 if it is not possible to create large files Alex Bennée
2019-12-19 10:49 ` [PULL 06/25] iotests: Skip test 079 " Alex Bennée
2019-12-19 10:49 ` [PULL 07/25] tests/hd-geo-test: Skip test when images can not be created Alex Bennée
2019-12-19 10:49 ` [PULL 08/25] tests/test-util-filemonitor: Skip test on non-x86 Travis containers Alex Bennée
2019-12-19 10:49 ` [PULL 09/25] travis.yml: Enable builds on arm64, ppc64le and s390x Alex Bennée
2019-12-19 10:49 ` [PULL 10/25] ci: build out-of-tree Alex Bennée
2019-12-19 10:49 ` [PULL 11/25] Fix double free issue in qemu_set_log_filename() Alex Bennée
2019-12-19 10:49 ` [PULL 12/25] Cleaned up flow of code in qemu_set_log(), to simplify and clarify Alex Bennée
2019-12-19 10:49 ` [PULL 13/25] Add a mutex to guarantee single writer to qemu_logfile handle Alex Bennée
2019-12-19 10:49 ` [PULL 14/25] qemu_log_lock/unlock now preserves the " Alex Bennée
2019-12-19 10:49 ` [PULL 15/25] Add use of RCU for qemu_logfile Alex Bennée
2019-12-19 10:49 ` [PULL 16/25] Added tests for close and change of logfile Alex Bennée
2019-12-19 10:49 ` [PULL 17/25] docker: gtester is no longer used Alex Bennée
2019-12-19 10:49 ` [PULL 18/25] travis.yml: Remove the redundant clang-with-MAIN_SOFTMMU_TARGETS entry Alex Bennée
2019-12-19 10:49 ` [PULL 19/25] linux-user: convert target_mprotect debug to tracepoint Alex Bennée
2019-12-19 10:49 ` [PULL 20/25] linux-user: convert target_mmap " Alex Bennée
2019-12-19 10:49 ` [PULL 21/25] linux-user: add target_mmap_complete tracepoint Alex Bennée
2019-12-19 10:49 ` [PULL 22/25] linux-user: log page table changes under -d page Alex Bennée
2019-12-19 10:49 ` [PULL 23/25] linux-user: convert target_munmap debug to a tracepoint Alex Bennée
2019-12-19 10:49 ` [PULL 24/25] trace: replace hand-crafted pattern_glob with g_pattern_match_simple Alex Bennée
2019-12-19 10:49 ` [PULL 25/25] tests/tcg: ensure we re-configure if configure.sh is updated Alex Bennée
2019-12-20 16:36 ` [PULL 00/25] testing and logging updates Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191219104934.866-4-alex.bennee@linaro.org \
--to=alex.bennee@linaro.org \
--cc=fam@euphon.net \
--cc=peter.maydell@linaro.org \
--cc=philmd@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
--cc=sw@weilnetz.de \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).