From: "Alex Bennée" <alex.bennee@linaro.org>
To: qemu-devel@nongnu.org
Cc: damien.hedde@greensocs.com, luis.machado@linaro.org,
"Philippe Mathieu-Daudé" <philmd@redhat.com>,
"Richard Henderson" <richard.henderson@linaro.org>,
alan.hayward@arm.com, "Alex Bennée" <alex.bennee@linaro.org>
Subject: [PATCH v4 04/21] gdbstub: move mem_buf to GDBState and use GByteArray
Date: Fri, 20 Dec 2019 12:04:21 +0000 [thread overview]
Message-ID: <20191220120438.16114-5-alex.bennee@linaro.org> (raw)
In-Reply-To: <20191220120438.16114-1-alex.bennee@linaro.org>
This is in preparation for further re-factoring of the register API
with the rest of the code. Theoretically the read register function
could overwrite the MAX_PACKET_LENGTH buffer although currently all
registers are well within the size range.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Tested-by: Damien Hedde <damien.hedde@greensocs.com>
---
v4
- don't set_set to len on rcmd (it's zeroed before we get here)
v3
- fixed up email on Damien's tags
---
gdbstub.c | 56 ++++++++++++++++++++++++++++++++++---------------------
1 file changed, 35 insertions(+), 21 deletions(-)
diff --git a/gdbstub.c b/gdbstub.c
index 80d99c209ff..736e3cc1052 100644
--- a/gdbstub.c
+++ b/gdbstub.c
@@ -367,6 +367,7 @@ typedef struct GDBState {
char syscall_buf[256];
gdb_syscall_complete_cb current_syscall_cb;
GString *str_buf;
+ GByteArray *mem_buf;
} GDBState;
/* By default use no IRQs and no timers while single stepping so as to
@@ -382,6 +383,7 @@ static void init_gdbserver_state(void)
memset(&gdbserver_state, 0, sizeof(GDBState));
gdbserver_state.init = true;
gdbserver_state.str_buf = g_string_new(NULL);
+ gdbserver_state.mem_buf = g_byte_array_sized_new(MAX_PACKET_LENGTH);
}
#ifndef CONFIG_USER_ONLY
@@ -576,12 +578,13 @@ static void memtohex(GString *buf, const uint8_t *mem, int len)
g_string_append_c(buf, '\0');
}
-static void hextomem(uint8_t *mem, const char *buf, int len)
+static void hextomem(GByteArray *mem, const char *buf, int len)
{
int i;
for(i = 0; i < len; i++) {
- mem[i] = (fromhex(buf[0]) << 4) | fromhex(buf[1]);
+ guint8 byte = fromhex(buf[0]) << 4 | fromhex(buf[1]);
+ g_byte_array_append(mem, &byte, 1);
buf += 2;
}
}
@@ -1412,7 +1415,6 @@ static int cmd_parse_params(const char *data, const char *schema,
typedef struct GdbCmdContext {
GdbCmdVariant *params;
int num_params;
- uint8_t mem_buf[MAX_PACKET_LENGTH];
} GdbCmdContext;
typedef void (*GdbCmdHandler)(GdbCmdContext *gdb_ctx, void *user_ctx);
@@ -1503,6 +1505,7 @@ static void run_cmd_parser(const char *data, const GdbCmdParseEntry *cmd)
}
g_string_set_size(gdbserver_state.str_buf, 0);
+ g_byte_array_set_size(gdbserver_state.mem_buf, 0);
/* In case there was an error during the command parsing we must
* send a NULL packet to indicate the command is not supported */
@@ -1715,8 +1718,8 @@ static void handle_set_reg(GdbCmdContext *gdb_ctx, void *user_ctx)
}
reg_size = strlen(gdb_ctx->params[1].data) / 2;
- hextomem(gdb_ctx->mem_buf, gdb_ctx->params[1].data, reg_size);
- gdb_write_register(gdbserver_state.g_cpu, gdb_ctx->mem_buf,
+ hextomem(gdbserver_state.mem_buf, gdb_ctx->params[1].data, reg_size);
+ gdb_write_register(gdbserver_state.g_cpu, gdbserver_state.mem_buf->data,
gdb_ctx->params[0].val_ull);
put_packet("OK");
}
@@ -1735,14 +1738,17 @@ static void handle_get_reg(GdbCmdContext *gdb_ctx, void *user_ctx)
return;
}
- reg_size = gdb_read_register(gdbserver_state.g_cpu, gdb_ctx->mem_buf,
+ reg_size = gdb_read_register(gdbserver_state.g_cpu,
+ gdbserver_state.mem_buf->data,
gdb_ctx->params[0].val_ull);
if (!reg_size) {
put_packet("E14");
return;
+ } else {
+ g_byte_array_set_size(gdbserver_state.mem_buf, reg_size);
}
- memtohex(gdbserver_state.str_buf, gdb_ctx->mem_buf, reg_size);
+ memtohex(gdbserver_state.str_buf, gdbserver_state.mem_buf->data, reg_size);
put_strbuf();
}
@@ -1759,11 +1765,11 @@ static void handle_write_mem(GdbCmdContext *gdb_ctx, void *user_ctx)
return;
}
- hextomem(gdb_ctx->mem_buf, gdb_ctx->params[2].data,
+ hextomem(gdbserver_state.mem_buf, gdb_ctx->params[2].data,
gdb_ctx->params[1].val_ull);
if (target_memory_rw_debug(gdbserver_state.g_cpu, gdb_ctx->params[0].val_ull,
- gdb_ctx->mem_buf,
- gdb_ctx->params[1].val_ull, true)) {
+ gdbserver_state.mem_buf->data,
+ gdbserver_state.mem_buf->len, true)) {
put_packet("E14");
return;
}
@@ -1784,14 +1790,17 @@ static void handle_read_mem(GdbCmdContext *gdb_ctx, void *user_ctx)
return;
}
+ g_byte_array_set_size(gdbserver_state.mem_buf, gdb_ctx->params[1].val_ull);
+
if (target_memory_rw_debug(gdbserver_state.g_cpu, gdb_ctx->params[0].val_ull,
- gdb_ctx->mem_buf,
- gdb_ctx->params[1].val_ull, false)) {
+ gdbserver_state.mem_buf->data,
+ gdbserver_state.mem_buf->len, false)) {
put_packet("E14");
return;
}
- memtohex(gdbserver_state.str_buf, gdb_ctx->mem_buf, gdb_ctx->params[1].val_ull);
+ memtohex(gdbserver_state.str_buf, gdbserver_state.mem_buf->data,
+ gdbserver_state.mem_buf->len);
put_strbuf();
}
@@ -1806,9 +1815,9 @@ static void handle_write_all_regs(GdbCmdContext *gdb_ctx, void *user_ctx)
}
cpu_synchronize_state(gdbserver_state.g_cpu);
- registers = gdb_ctx->mem_buf;
len = strlen(gdb_ctx->params[0].data) / 2;
- hextomem(registers, gdb_ctx->params[0].data, len);
+ hextomem(gdbserver_state.mem_buf, gdb_ctx->params[0].data, len);
+ registers = gdbserver_state.mem_buf->data;
for (addr = 0; addr < gdbserver_state.g_cpu->gdb_num_g_regs && len > 0;
addr++) {
reg_size = gdb_write_register(gdbserver_state.g_cpu, registers, addr);
@@ -1825,11 +1834,14 @@ static void handle_read_all_regs(GdbCmdContext *gdb_ctx, void *user_ctx)
cpu_synchronize_state(gdbserver_state.g_cpu);
len = 0;
for (addr = 0; addr < gdbserver_state.g_cpu->gdb_num_g_regs; addr++) {
- len += gdb_read_register(gdbserver_state.g_cpu, gdb_ctx->mem_buf + len,
+ len += gdb_read_register(gdbserver_state.g_cpu,
+ gdbserver_state.mem_buf->data + len,
addr);
}
+ /* FIXME: This is after the fact sizing */
+ g_byte_array_set_size(gdbserver_state.mem_buf, len);
- memtohex(gdbserver_state.str_buf, gdb_ctx->mem_buf, len);
+ memtohex(gdbserver_state.str_buf, gdbserver_state.mem_buf->data, len);
put_strbuf();
}
@@ -2078,6 +2090,7 @@ static void handle_query_offsets(GdbCmdContext *gdb_ctx, void *user_ctx)
#else
static void handle_query_rcmd(GdbCmdContext *gdb_ctx, void *user_ctx)
{
+ const guint8 zero = 0;
int len;
if (!gdb_ctx->num_params) {
@@ -2091,12 +2104,13 @@ static void handle_query_rcmd(GdbCmdContext *gdb_ctx, void *user_ctx)
return;
}
+ g_assert(gdbserver_state.mem_buf->len == 0);
len = len / 2;
- hextomem(gdb_ctx->mem_buf, gdb_ctx->params[0].data, len);
- gdb_ctx->mem_buf[len++] = 0;
- qemu_chr_be_write(gdbserver_state.mon_chr, gdb_ctx->mem_buf, len);
+ hextomem(gdbserver_state.mem_buf, gdb_ctx->params[0].data, len);
+ g_byte_array_append(gdbserver_state.mem_buf, &zero, 1);
+ qemu_chr_be_write(gdbserver_state.mon_chr, gdbserver_state.mem_buf->data,
+ gdbserver_state.mem_buf->len);
put_packet("OK");
-
}
#endif
--
2.20.1
next prev parent reply other threads:[~2019-12-20 12:11 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-20 12:04 [PATCH v4 00/21] gdbstub refactor and SVE support (+check-tcg tweaks) Alex Bennée
2019-12-20 12:04 ` [PATCH v4 01/21] gdbstub: make GDBState static and have common init function Alex Bennée
2019-12-20 12:04 ` [PATCH v4 02/21] gdbstub: stop passing GDBState * around and use global Alex Bennée
2019-12-20 12:04 ` [PATCH v4 03/21] gdbstub: move str_buf to GDBState and use GString Alex Bennée
2019-12-20 12:04 ` Alex Bennée [this message]
2019-12-20 12:04 ` [PATCH v4 05/21] gdbstub: add helper for 128 bit registers Alex Bennée
2019-12-20 12:04 ` [PATCH v4 06/21] target/arm: use gdb_get_reg helpers Alex Bennée
2019-12-20 12:04 ` [PATCH v4 07/21] target/m68k: " Alex Bennée
2019-12-20 12:04 ` [PATCH v4 08/21] gdbstub: extend GByteArray to read register helpers Alex Bennée
2019-12-20 15:23 ` Damien Hedde
2019-12-20 12:04 ` [PATCH v4 09/21] target/arm: prepare for multiple dynamic XMLs Alex Bennée
2019-12-20 12:04 ` [PATCH v4 10/21] target/arm: explicitly encode regnum in our XML Alex Bennée
2019-12-20 12:04 ` [PATCH v4 11/21] target/arm: default SVE length to 64 bytes for linux-user Alex Bennée
2019-12-20 12:04 ` [PATCH v4 12/21] target/arm: generate xml description of our SVE registers Alex Bennée
2019-12-20 12:04 ` [PATCH v4 13/21] tests/tcg: add a configure compiler check for ARMv8.1 and SVE Alex Bennée
2019-12-20 12:04 ` [PATCH v4 14/21] target/arm: don't bother with id_aa64pfr0_read for USER_ONLY Alex Bennée
2019-12-20 12:04 ` [PATCH v4 15/21] tests/tcg/aarch64: userspace system register test Alex Bennée
2019-12-20 12:04 ` [PATCH v4 16/21] tests/guest-debug: add a simple test runner Alex Bennée
2019-12-20 12:04 ` [PATCH v4 17/21] tests/tcg/aarch64: add a gdbstub testcase for SVE registers Alex Bennée
2019-12-20 12:04 ` [PATCH v4 18/21] tests/tcg/aarch64: add SVE iotcl test Alex Bennée
2019-12-20 12:04 ` [PATCH v4 19/21] tests/tcg/aarch64: add test-sve-ioctl guest-debug test Alex Bennée
2019-12-20 12:04 ` [PATCH v4 20/21] gdbstub: change GDBState.last_packet to GByteArray Alex Bennée
2019-12-20 12:04 ` [PATCH v4 21/21] gdbstub: do not split gdb_monitor_write payload Alex Bennée
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191220120438.16114-5-alex.bennee@linaro.org \
--to=alex.bennee@linaro.org \
--cc=alan.hayward@arm.com \
--cc=damien.hedde@greensocs.com \
--cc=luis.machado@linaro.org \
--cc=philmd@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).