From: Laurent Vivier <laurent@vivier.eu>
To: qemu-devel@nongnu.org
Cc: Riku Voipio <riku.voipio@iki.fi>,
Laurent Vivier <laurent@vivier.eu>,
Filip Bozuta <Filip.Bozuta@rt-rk.com>
Subject: [PULL 15/17] linux-user: Add support for getting/setting RTC wakeup alarm using ioctls
Date: Thu, 23 Jan 2020 09:22:25 +0100 [thread overview]
Message-ID: <20200123082227.2037994-16-laurent@vivier.eu> (raw)
In-Reply-To: <20200123082227.2037994-1-laurent@vivier.eu>
From: Filip Bozuta <Filip.Bozuta@rt-rk.com>
This patch implements functionalities of following ioctls:
RTC_WKALM_SET, RTC_WKALM_GET - Getting/Setting wakeup alarm
Some RTCs support a more powerful alarm interface, using these
ioctls to read or write the RTC's alarm time (respectively)
with this structure:
struct rtc_wkalrm {
unsigned char enabled;
unsigned char pending;
struct rtc_time time;
};
The enabled flag is used to enable or disable the alarm
interrupt, or to read its current status; when using these
calls, RTC_AIE_ON and RTC_AIE_OFF are not used. The pending
flag is used by RTC_WKALM_RD to report a pending interrupt
(so it's mostly useless on Linux, except when talking to the
RTC managed by EFI firmware). The time field is as used with
RTC_ALM_READ and RTC_ALM_SET except that the tm_mday, tm_mon,
and tm_year fields are also valid. A pointer to this structure
should be passed as the third ioctl's argument.
Implementation notes:
All ioctls in this patch have a pointer to a structure
rtc_wkalrm as their third argument. That is the reason why
corresponding definition is added in linux-user/syscall_types.h.
Since all elements of this structure are either of type
'unsigned char' or 'struct rtc_time' (that was covered in one
of previous patches), the rest of the implementation is
straightforward.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Filip Bozuta <Filip.Bozuta@rt-rk.com>
Message-Id: <1579117007-7565-5-git-send-email-Filip.Bozuta@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
---
linux-user/ioctls.h | 2 ++
linux-user/syscall_defs.h | 2 ++
linux-user/syscall_types.h | 5 +++++
3 files changed, 9 insertions(+)
diff --git a/linux-user/ioctls.h b/linux-user/ioctls.h
index 9e91eaae7705..e4c1fbf52b1b 100644
--- a/linux-user/ioctls.h
+++ b/linux-user/ioctls.h
@@ -85,6 +85,8 @@
IOCTL(RTC_IRQP_SET, IOC_W, TYPE_ULONG)
IOCTL(RTC_EPOCH_READ, IOC_R, MK_PTR(TYPE_ULONG))
IOCTL(RTC_EPOCH_SET, IOC_W, TYPE_ULONG)
+ IOCTL(RTC_WKALM_RD, IOC_R, MK_PTR(MK_STRUCT(STRUCT_rtc_wkalrm)))
+ IOCTL(RTC_WKALM_SET, IOC_W, MK_PTR(MK_STRUCT(STRUCT_rtc_wkalrm)))
IOCTL(BLKROSET, IOC_W, MK_PTR(TYPE_INT))
IOCTL(BLKROGET, IOC_R, MK_PTR(TYPE_INT))
diff --git a/linux-user/syscall_defs.h b/linux-user/syscall_defs.h
index fcbb2ee9a387..c33432a374e5 100644
--- a/linux-user/syscall_defs.h
+++ b/linux-user/syscall_defs.h
@@ -780,6 +780,8 @@ struct target_pollfd {
#define TARGET_RTC_IRQP_SET TARGET_IOW('p', 0x0c, abi_ulong)
#define TARGET_RTC_EPOCH_READ TARGET_IOR('p', 0x0d, abi_ulong)
#define TARGET_RTC_EPOCH_SET TARGET_IOW('p', 0x0e, abi_ulong)
+#define TARGET_RTC_WKALM_RD TARGET_IOR('p', 0x10, struct rtc_wkalrm)
+#define TARGET_RTC_WKALM_SET TARGET_IOW('p', 0x0f, struct rtc_wkalrm)
#if defined(TARGET_ALPHA) || defined(TARGET_MIPS) || defined(TARGET_SH4) || \
defined(TARGET_XTENSA)
diff --git a/linux-user/syscall_types.h b/linux-user/syscall_types.h
index bddc89a6641b..3efa9536ccfa 100644
--- a/linux-user/syscall_types.h
+++ b/linux-user/syscall_types.h
@@ -266,6 +266,11 @@ STRUCT(rtc_time,
TYPE_INT, /* tm_yday */
TYPE_INT) /* tm_isdst */
+STRUCT(rtc_wkalrm,
+ TYPE_CHAR, /* enabled */
+ TYPE_CHAR, /* pending */
+ MK_STRUCT(STRUCT_rtc_time)) /* time */
+
STRUCT(blkpg_ioctl_arg,
TYPE_INT, /* op */
TYPE_INT, /* flags */
--
2.24.1
next prev parent reply other threads:[~2020-01-23 8:32 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-23 8:22 [PULL 00/17] Linux user for 5.0 patches Laurent Vivier
2020-01-23 8:22 ` [PULL 01/17] linux-user:Fix align mistake when mmap guest space Laurent Vivier
2020-01-23 8:22 ` [PULL 02/17] linux-user: Reserve space for brk Laurent Vivier
2020-01-23 8:22 ` [PULL 03/17] linux-user: Add support for FS_IOC_<GET|SET>VERSION ioctls Laurent Vivier
2020-01-23 8:22 ` [PULL 04/17] linux-user: Add support for FS_IOC32_<GET|SET>FLAGS ioctls Laurent Vivier
2020-01-23 8:22 ` [PULL 05/17] linux-user: Add support for FS_IOC32_<GET|SET>VERSION ioctls Laurent Vivier
2020-01-23 8:22 ` [PULL 06/17] linux-user: Add support for FD<SETEMSGTRESH|SETMAXERRS|GETMAXERRS> ioctls Laurent Vivier
2020-01-23 8:22 ` [PULL 07/17] linux-user: Add support for FDFMT<BEG|TRK|END> ioctls Laurent Vivier
2020-01-23 8:22 ` [PULL 08/17] configure: Detect kcov support and introduce CONFIG_KCOV Laurent Vivier
2020-01-23 8:22 ` [PULL 09/17] linux-user: Add support for KCOV_<ENABLE|DISABLE> ioctls Laurent Vivier
2020-01-23 8:22 ` [PULL 10/17] linux-user: Add support for KCOV_INIT_TRACE ioctl Laurent Vivier
2020-01-23 8:22 ` [PULL 11/17] linux-user: Add support for TYPE_LONG and TYPE_ULONG in do_ioctl() Laurent Vivier
2020-01-23 8:22 ` [PULL 12/17] linux-user: Add support for enabling/disabling RTC features using ioctls Laurent Vivier
2020-01-23 8:22 ` [PULL 13/17] linux-user: Add support for getting/setting RTC time and alarm " Laurent Vivier
2020-01-23 8:22 ` [PULL 14/17] linux-user: Add support for getting/setting RTC periodic interrupt and epoch " Laurent Vivier
2020-01-23 8:22 ` Laurent Vivier [this message]
2020-01-23 8:22 ` [PULL 16/17] linux-user: Add support for getting/setting RTC PLL correction " Laurent Vivier
2020-01-23 8:22 ` [PULL 17/17] linux-user: Add support for read/clear RTC voltage low detector " Laurent Vivier
2020-01-23 15:17 ` [PULL 00/17] Linux user for 5.0 patches Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200123082227.2037994-16-laurent@vivier.eu \
--to=laurent@vivier.eu \
--cc=Filip.Bozuta@rt-rk.com \
--cc=qemu-devel@nongnu.org \
--cc=riku.voipio@iki.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).