Re: [PATCH 0/2] ppc/pnv: Add models for PHB4 and PHB3 PCIe Host bridges

[David Gibson <david@gibson.dropbear.id.au>]

[-- Attachment #1: Type: text/plain, Size: 3459 bytes --]

On Mon, Jan 27, 2020 at 03:45:04PM +0100, Cédric Le Goater wrote:
> Hello,
> 
> These are models for the PCIe Host Bridges, PHB3 and PHB4, as found on
> POWER8 and POWER9 processors. It includes the PowerBus logic interface
> (PBCQ), IOMMU support, a single PCIe Gen.3/4 Root Complex, and support
> for MSI and LSI interrupt sources as found on each system depending on
> the interrupt controller: XICS or XIVE.
> 
> No default device layout is provided and PCI devices can be added on
> any of the available PCIe Root Port (pcie.0 .. 2) with address 0x0 as
> the firwware (skiboot) only accepts a single device per root port. To
> run a simple system with a network and a storage adapters, use a
> command line options such as :
> 
>   -device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0
>   -netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0
> 
>   -device megasas,id=scsi0,bus=pcie.1,addr=0x0
>   -drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none
>   -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2
> 
> If more are needed, include a bridge.
> 
> Multi chip is supported, each chip adding its set of PHB controllers
> and its PCI busses. The model doesn't emulate the EEH error handling
> and cold plugging PHB devices still needs some work.
> 
> XICS requires some adjustment to support the PHB3 MSI. The changes are
> provided in the PHB3 model but they could be decoupled in prereq
> patches.

Applied to ppc-for-5.0, thanks.

> 
> Thanks,
> 
> C.
> 
> Benjamin Herrenschmidt (1):
>   ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge
> 
> Cédric Le Goater (1):
>   ppc/pnv: Add models for POWER8 PHB3 PCIe Host bridge
> 
>  include/hw/pci-host/pnv_phb3.h      |  164 +++
>  include/hw/pci-host/pnv_phb3_regs.h |  450 +++++++++
>  include/hw/pci-host/pnv_phb4.h      |  230 +++++
>  include/hw/pci-host/pnv_phb4_regs.h |  553 ++++++++++
>  include/hw/pci/pcie_port.h          |    1 +
>  include/hw/ppc/pnv.h                |   11 +
>  include/hw/ppc/pnv_xscom.h          |   20 +
>  include/hw/ppc/xics.h               |    5 +
>  hw/intc/xics.c                      |   14 +-
>  hw/pci-host/pnv_phb3.c              | 1195 ++++++++++++++++++++++
>  hw/pci-host/pnv_phb3_msi.c          |  349 +++++++
>  hw/pci-host/pnv_phb3_pbcq.c         |  357 +++++++
>  hw/pci-host/pnv_phb4.c              | 1438 +++++++++++++++++++++++++++
>  hw/pci-host/pnv_phb4_pec.c          |  593 +++++++++++
>  hw/ppc/pnv.c                        |  176 +++-
>  hw/pci-host/Makefile.objs           |    2 +
>  hw/ppc/Kconfig                      |    2 +
>  17 files changed, 5557 insertions(+), 3 deletions(-)
>  create mode 100644 include/hw/pci-host/pnv_phb3.h
>  create mode 100644 include/hw/pci-host/pnv_phb3_regs.h
>  create mode 100644 include/hw/pci-host/pnv_phb4.h
>  create mode 100644 include/hw/pci-host/pnv_phb4_regs.h
>  create mode 100644 hw/pci-host/pnv_phb3.c
>  create mode 100644 hw/pci-host/pnv_phb3_msi.c
>  create mode 100644 hw/pci-host/pnv_phb3_pbcq.c
>  create mode 100644 hw/pci-host/pnv_phb4.c
>  create mode 100644 hw/pci-host/pnv_phb4_pec.c
> 

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]