From: Stefan Hajnoczi <stefanha@redhat.com>
To: qemu-devel@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>,
Peter Maydell <peter.maydell@linaro.org>,
qemu-block@nongnu.org, Julia Suvorova <jusual@redhat.com>,
Markus Armbruster <armbru@redhat.com>,
Max Reitz <mreitz@redhat.com>,
Stefan Hajnoczi <stefanha@redhat.com>,
Paolo Bonzini <pbonzini@redhat.com>, Fam Zheng <fam@euphon.net>,
Aarushi Mehta <mehta.aaru20@gmail.com>
Subject: [PULL 02/18] block/io: wait for serialising requests when a request becomes serialising
Date: Thu, 30 Jan 2020 21:30:58 +0000 [thread overview]
Message-ID: <20200130213114.325157-3-stefanha@redhat.com> (raw)
In-Reply-To: <20200130213114.325157-1-stefanha@redhat.com>
From: Paolo Bonzini <pbonzini@redhat.com>
Marking without waiting would not result in actual serialising behavior.
Thus, make a call bdrv_mark_request_serialising sufficient for
serialisation to happen.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1578495356-46219-3-git-send-email-pbonzini@redhat.com
Message-Id: <1578495356-46219-3-git-send-email-pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
block/file-posix.c | 1 -
block/io.c | 40 +++++++++++++++++----------------------
include/block/block_int.h | 3 +--
3 files changed, 18 insertions(+), 26 deletions(-)
diff --git a/block/file-posix.c b/block/file-posix.c
index 1b805bd938..2b08b02d27 100644
--- a/block/file-posix.c
+++ b/block/file-posix.c
@@ -2753,7 +2753,6 @@ raw_do_pwrite_zeroes(BlockDriverState *bs, int64_t offset, int bytes,
req->overlap_bytes = req->bytes;
bdrv_mark_request_serialising(req, bs->bl.request_alignment);
- bdrv_wait_serialising_requests(req);
}
#endif
diff --git a/block/io.c b/block/io.c
index b3a67fe1db..c466df8ed5 100644
--- a/block/io.c
+++ b/block/io.c
@@ -41,6 +41,7 @@
#define MAX_BOUNCE_BUFFER (32768 << BDRV_SECTOR_BITS)
static void bdrv_parent_cb_resize(BlockDriverState *bs);
+static bool coroutine_fn bdrv_wait_serialising_requests(BdrvTrackedRequest *self);
static int coroutine_fn bdrv_co_do_pwrite_zeroes(BlockDriverState *bs,
int64_t offset, int bytes, BdrvRequestFlags flags);
@@ -715,7 +716,7 @@ static void tracked_request_begin(BdrvTrackedRequest *req,
qemu_co_mutex_unlock(&bs->reqs_lock);
}
-void bdrv_mark_request_serialising(BdrvTrackedRequest *req, uint64_t align)
+bool bdrv_mark_request_serialising(BdrvTrackedRequest *req, uint64_t align)
{
int64_t overlap_offset = req->offset & ~(align - 1);
uint64_t overlap_bytes = ROUND_UP(req->offset + req->bytes, align)
@@ -728,18 +729,7 @@ void bdrv_mark_request_serialising(BdrvTrackedRequest *req, uint64_t align)
req->overlap_offset = MIN(req->overlap_offset, overlap_offset);
req->overlap_bytes = MAX(req->overlap_bytes, overlap_bytes);
-}
-
-static bool is_request_serialising_and_aligned(BdrvTrackedRequest *req)
-{
- /*
- * If the request is serialising, overlap_offset and overlap_bytes are set,
- * so we can check if the request is aligned. Otherwise, don't care and
- * return false.
- */
-
- return req->serialising && (req->offset == req->overlap_offset) &&
- (req->bytes == req->overlap_bytes);
+ return bdrv_wait_serialising_requests(req);
}
/**
@@ -823,7 +813,7 @@ void bdrv_dec_in_flight(BlockDriverState *bs)
bdrv_wakeup(bs);
}
-bool coroutine_fn bdrv_wait_serialising_requests(BdrvTrackedRequest *self)
+static bool coroutine_fn bdrv_wait_serialising_requests(BdrvTrackedRequest *self)
{
BlockDriverState *bs = self->bs;
BdrvTrackedRequest *req;
@@ -1455,10 +1445,10 @@ static int coroutine_fn bdrv_aligned_preadv(BdrvChild *child,
* it ensures that the CoR read and write operations are atomic and
* guest writes cannot interleave between them. */
bdrv_mark_request_serialising(req, bdrv_get_cluster_size(bs));
+ } else {
+ bdrv_wait_serialising_requests(req);
}
- bdrv_wait_serialising_requests(req);
-
if (flags & BDRV_REQ_COPY_ON_READ) {
int64_t pnum;
@@ -1851,13 +1841,19 @@ bdrv_co_write_req_prepare(BdrvChild *child, int64_t offset, uint64_t bytes,
assert(!(flags & ~BDRV_REQ_MASK));
if (flags & BDRV_REQ_SERIALISING) {
- bdrv_mark_request_serialising(req, bdrv_get_cluster_size(bs));
+ waited = bdrv_mark_request_serialising(req, bdrv_get_cluster_size(bs));
+ /*
+ * For a misaligned request we should have already waited earlier,
+ * because we come after bdrv_padding_rmw_read which must be called
+ * with the request already marked as serialising.
+ */
+ assert(!waited ||
+ (req->offset == req->overlap_offset &&
+ req->bytes == req->overlap_bytes));
+ } else {
+ bdrv_wait_serialising_requests(req);
}
- waited = bdrv_wait_serialising_requests(req);
-
- assert(!waited || !req->serialising ||
- is_request_serialising_and_aligned(req));
assert(req->overlap_offset <= offset);
assert(offset + bytes <= req->overlap_offset + req->overlap_bytes);
assert(end_sector <= bs->total_sectors || child->perm & BLK_PERM_RESIZE);
@@ -2019,7 +2015,6 @@ static int coroutine_fn bdrv_co_do_zero_pwritev(BdrvChild *child,
padding = bdrv_init_padding(bs, offset, bytes, &pad);
if (padding) {
bdrv_mark_request_serialising(req, align);
- bdrv_wait_serialising_requests(req);
bdrv_padding_rmw_read(child, req, &pad, true);
@@ -2122,7 +2117,6 @@ int coroutine_fn bdrv_co_pwritev_part(BdrvChild *child,
if (bdrv_pad_request(bs, &qiov, &qiov_offset, &offset, &bytes, &pad)) {
bdrv_mark_request_serialising(&req, align);
- bdrv_wait_serialising_requests(&req);
bdrv_padding_rmw_read(child, &req, &pad, false);
}
diff --git a/include/block/block_int.h b/include/block/block_int.h
index dd033d0b37..640fb82c78 100644
--- a/include/block/block_int.h
+++ b/include/block/block_int.h
@@ -999,8 +999,7 @@ extern unsigned int bdrv_drain_all_count;
void bdrv_apply_subtree_drain(BdrvChild *child, BlockDriverState *new_parent);
void bdrv_unapply_subtree_drain(BdrvChild *child, BlockDriverState *old_parent);
-bool coroutine_fn bdrv_wait_serialising_requests(BdrvTrackedRequest *self);
-void bdrv_mark_request_serialising(BdrvTrackedRequest *req, uint64_t align);
+bool coroutine_fn bdrv_mark_request_serialising(BdrvTrackedRequest *req, uint64_t align);
BdrvTrackedRequest *coroutine_fn bdrv_co_get_self_request(BlockDriverState *bs);
int get_tmp_filename(char *filename, int size);
--
2.24.1
next prev parent reply other threads:[~2020-01-30 21:35 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-30 21:30 [PULL 00/18] Block patches Stefan Hajnoczi
2020-01-30 21:30 ` [PULL 01/18] block: eliminate BDRV_REQ_NO_SERIALISING Stefan Hajnoczi
2020-01-30 21:30 ` Stefan Hajnoczi [this message]
2020-01-30 21:30 ` [PULL 03/18] block/io: take bs->reqs_lock in bdrv_mark_request_serialising Stefan Hajnoczi
2020-01-30 21:31 ` [PULL 04/18] configure: permit use of io_uring Stefan Hajnoczi
2020-01-30 21:31 ` [PULL 05/18] qapi/block-core: add option for io_uring Stefan Hajnoczi
2020-01-30 21:31 ` [PULL 06/18] block/block: add BDRV flag " Stefan Hajnoczi
2020-01-30 21:31 ` [PULL 07/18] block/io_uring: implements interfaces " Stefan Hajnoczi
2020-01-30 21:31 ` [PULL 08/18] stubs: add stubs for io_uring interface Stefan Hajnoczi
2020-01-30 21:31 ` [PULL 09/18] util/async: add aio interfaces for io_uring Stefan Hajnoczi
2020-01-30 21:31 ` [PULL 10/18] blockdev: adds bdrv_parse_aio to use io_uring Stefan Hajnoczi
2020-01-30 21:31 ` [PULL 11/18] block/file-posix.c: extend " Stefan Hajnoczi
2020-01-30 21:31 ` [PULL 12/18] block: add trace events for io_uring Stefan Hajnoczi
2020-01-30 21:31 ` [PULL 13/18] block/io_uring: adds userspace completion polling Stefan Hajnoczi
2020-01-30 21:31 ` [PULL 14/18] qemu-io: adds option to use aio engine Stefan Hajnoczi
2020-01-30 21:31 ` [PULL 15/18] qemu-img: adds option to use aio engine for benchmarking Stefan Hajnoczi
2020-02-03 10:55 ` Peter Maydell
2020-02-05 15:55 ` Julia Suvorova
2020-01-30 21:31 ` [PULL 16/18] qemu-nbd: adds option for aio engines Stefan Hajnoczi
2020-01-30 21:31 ` [PULL 17/18] tests/qemu-iotests: enable testing with aio options Stefan Hajnoczi
2020-01-30 21:31 ` [PULL 18/18] tests/qemu-iotests: use AIOMODE with various tests Stefan Hajnoczi
2020-01-31 11:39 ` [PULL 00/18] Block patches Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200130213114.325157-3-stefanha@redhat.com \
--to=stefanha@redhat.com \
--cc=armbru@redhat.com \
--cc=fam@euphon.net \
--cc=jusual@redhat.com \
--cc=kwolf@redhat.com \
--cc=mehta.aaru20@gmail.com \
--cc=mreitz@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).