From: Max Reitz <mreitz@redhat.com>
To: qemu-block@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>,
Peter Maydell <peter.maydell@linaro.org>,
qemu-devel@nongnu.org, Max Reitz <mreitz@redhat.com>
Subject: [PULL 10/17] iotests: Enable more tests in the 'auto' group to improve test coverage
Date: Thu, 6 Feb 2020 13:51:25 +0100 [thread overview]
Message-ID: <20200206125132.594625-11-mreitz@redhat.com> (raw)
In-Reply-To: <20200206125132.594625-1-mreitz@redhat.com>
From: Thomas Huth <thuth@redhat.com>
According to Kevin, tests 030, 040 and 041 are among the most valuable
tests that we have, so we should always run them if possible, even if
they take a little bit longer.
According to Max, it would be good to have a test for iothreads and
migration. 127 and 256 seem to be good candidates for iothreads. For
migration, let's enable 181 and 203 (which also tests iothreads).
(091 would be a good candidate for migration, too, but Alex Bennée
reported that this test fails on ZFS file systems, so it can't be
included yet)
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 20200121095205.26323-7-thuth@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
---
tests/qemu-iotests/group | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/tests/qemu-iotests/group b/tests/qemu-iotests/group
index e041cc1ee3..9d30a4b6c4 100644
--- a/tests/qemu-iotests/group
+++ b/tests/qemu-iotests/group
@@ -51,7 +51,7 @@
027 rw auto quick
028 rw backing quick
029 rw auto quick
-030 rw backing
+030 rw auto backing
031 rw auto quick
032 rw auto quick
033 rw auto quick
@@ -61,8 +61,8 @@
037 rw auto backing quick
038 rw auto backing quick
039 rw auto quick
-040 rw
-041 rw backing
+040 rw auto
+041 rw auto backing
042 rw auto quick
043 rw auto backing
044 rw
@@ -148,7 +148,7 @@
124 rw backing
125 rw
126 rw auto backing
-127 rw backing quick
+127 rw auto backing quick
128 rw quick
129 rw quick
130 rw quick
@@ -197,7 +197,7 @@
177 rw auto quick
178 img
179 rw auto quick
-181 rw migration
+181 rw auto migration
182 rw quick
183 rw migration
184 rw auto quick
@@ -218,7 +218,7 @@
200 rw
201 rw migration
202 rw quick
-203 rw migration
+203 rw auto migration
204 rw quick
205 rw quick
206 rw
@@ -270,7 +270,7 @@
253 rw quick
254 rw backing quick
255 rw quick
-256 rw quick
+256 rw auto quick
257 rw
258 rw quick
260 rw quick
--
2.24.1
next prev parent reply other threads:[~2020-02-06 13:06 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-06 12:51 [PULL 00/17] Block patches Max Reitz
2020-02-06 12:51 ` [PULL 01/17] qcow2: Assert that host cluster offsets fit in L2 table entries Max Reitz
2020-02-06 12:51 ` [PULL 02/17] block: Use a GString in bdrv_perm_names() Max Reitz
2020-02-06 12:51 ` [PULL 03/17] block: fix memleaks in bdrv_refresh_filename Max Reitz
2020-02-06 12:51 ` [PULL 04/17] qcow2: Use a GString in report_unsupported_feature() Max Reitz
2020-02-06 12:51 ` [PULL 05/17] iotests: remove 'linux' from default supported platforms Max Reitz
2020-02-06 12:51 ` [PULL 06/17] iotests: Test 041 only works on certain systems Max Reitz
2020-02-06 12:51 ` [PULL 07/17] iotests: Test 183 does not work on macOS and OpenBSD Max Reitz
2020-02-06 12:51 ` [PULL 08/17] iotests: Check for the availability of the required devices in 267 and 127 Max Reitz
2020-02-06 12:51 ` [PULL 09/17] iotests: Skip Python-based tests if QEMU does not support virtio-blk Max Reitz
2020-02-06 12:51 ` Max Reitz [this message]
2020-02-06 12:51 ` [PULL 11/17] qcow2: Don't round the L1 table allocation up to the sector size Max Reitz
2020-02-06 12:51 ` [PULL 12/17] qcow2: Tighten cluster_offset alignment assertions Max Reitz
2020-02-06 12:51 ` [PULL 13/17] qcow2: Use bs->bl.request_alignment when updating an L1 entry Max Reitz
2020-02-06 12:51 ` [PULL 14/17] qcow2: Don't require aligned offsets in qcow2_co_copy_range_from() Max Reitz
2020-02-06 12:51 ` [PULL 15/17] qcow2: Use BDRV_SECTOR_SIZE instead of the hardcoded value Max Reitz
2020-02-06 12:51 ` [PULL 16/17] block/backup-top: fix failure path Max Reitz
2020-02-06 12:51 ` [PULL 17/17] iotests: add test for backup-top failure on permission activation Max Reitz
2020-02-06 18:58 ` [PULL 00/17] Block patches Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200206125132.594625-11-mreitz@redhat.com \
--to=mreitz@redhat.com \
--cc=kwolf@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).